Brake Rotor - Rear
Hover over the image to zoom in
Share this:

Carquest Wearever Brake Rotor - Rear

Part No. YH145726 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

CARQUEST Wearever Rotors are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design and non-directional finish that eliminates noise and enhances pedal feel. CARQUEST Wearever Rotors are designed to dissipate heat helping to eliminate brake fade and increase the life of your pads. Ready to install out of the box to save you time. 

Product Features:
  • Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • OE configuration to dissipate heat, increasing pad life
  • Proper harmonic design helps to reduce brake noise
  • Non-directional finish for less break-in time and reduced brake noise
  • Ready for immediate "out-of-the-box" installation (after cleaning)
Back To Top
ABS Sensor Ring Included:No
Bolt Circle Diameter:5 in
Bolt Hole Quantity:5
Construction:Full Cast
Disc Finish:Non-Directional
Discard Thickness:10.4 mm
Grade Type:Regular
Height:3.01 in
Inside Diameter:219.9 mm
Material:G3000
Nominal Thickness:12 mm
Outside Diameter:12.44 in
Rust Resistant Coating:No
Slotted:No
Solid Or Vented Type Rotor:Solid
Stud Thread Diameter:16.8 mm
Surface Type:Smooth

REVIEW SNAPSHOT®

by PowerReviews
Carquest WeareverBrake Rotor - Rear
 
4.4

(based on 10 reviews)

Ratings Distribution

  • 5 Stars

     

    (7)

  • 4 Stars

     

    (2)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (1)

90%

of respondents would recommend this to a friend.

Pros

  • Easy to install (7)

Cons

No Cons

Best Uses

  • Everyday driving (6)
  • Replacement (5)
    • Reviewer Profile:
    • Auto enthusiast (4), Casual driver (4)

Most Liked Positive Review

 

Great fit & a Great price!

These fit perfectly as a replacement to a set of glazed stock Mopar rotors on my 2013 Jeep Wrangler JKUR. Install was a snap and I can feel the difference in stopping power. They're...Read complete review

These fit perfectly as a replacement to a set of glazed stock Mopar rotors on my 2013 Jeep Wrangler JKUR. Install was a snap and I can feel the difference in stopping power. They're no 4 piston cross drilled over-sized rotor kit, but they do the job and for the price they really can't be beat.

VS

Most Liked Negative Review

 

JUNK

RUST OUT IN 14 MONTHS . WILL NOT PASS INSPECTION

RUST OUT IN 14 MONTHS . WILL NOT PASS INSPECTION

Reviewed by 10 customers

Displaying reviews 1-10

Back to top

 
5.0

Good product

By 

from houston tx

About Me Truck Enthusiast

Verified Buyer

Pros

  • Easy To Install

Cons

    Best Uses

    • Everyday Driving

    Comments about Carquest Wearever Brake Rotor - Rear:

    Perfcet

     
    5.0

    Price was reasonable and product as described

    By 

    from Asheboro NC

    Verified Buyer

    Pros

      Cons

        Best Uses

        • Deliver mail

        Comments about Carquest Wearever Brake Rotor - Rear:

        Use the vehicle to deliver mail and go thru these quite frequently. Little heavy but not sure how to fix that.

         
        1.0

        JUNK

        By 

        from ROCHESTER NEW YORK

        See all my reviews

        Verified Buyer

        Comments about Carquest Wearever Brake Rotor - Rear:

        RUST OUT IN 14 MONTHS . WILL NOT PASS INSPECTION

         
        5.0

        Worked as expected

        By 

        from Atlanta, GA

        Verified Buyer

        Pros

        • Easy To Install

        Cons

        • Hammer Out Current One

        Best Uses

          Comments about Carquest Wearever Brake Rotor - Rear:

          Worked/fit perfectly on my 2012 Wrangler Rubicon. I somehow didn't hear the noise from the rear pads that were nearly worn, and when trying to change noticed about an 1/8" of the rotor was gone. No point in trying to get it resurfaced, so I changed pads/rotors. Hardest thing was taking the old rotor off. A good hammer is your friend!

           
          5.0

          Great fit & a Great price!

          By 

          from Washington, DC

          About Me Auto Enthusiast, Off-roader, Shade tree mechanic

          See all my reviews

          Verified Reviewer

          Pros

          • Easy To Install

          Cons

            Best Uses

            • Everyday Driving
            • Replacement

            Comments about Carquest Wearever Brake Rotor - Rear:

            These fit perfectly as a replacement to a set of glazed stock Mopar rotors on my 2013 Jeep Wrangler JKUR. Install was a snap and I can feel the difference in stopping power. They're no 4 piston cross drilled over-sized rotor kit, but they do the job and for the price they really can't be beat.

            (2 of 4 customers found this review helpful)

             
            4.0

            Great quality for the price

            By 

            from Orange Park, FL

            About Me Casual Driver

            Verified Buyer

            Pros

            • Easy To Install
            • No Fade

            Cons

            • Heavy

            Best Uses

            • Everyday Driving
            • Replacement
            • Restoration

            Comments about Carquest Wearever Brake Rotor - Rear:

            2011 Jeep Wrangler

            (2 of 4 customers found this review helpful)

             
            5.0

            right part in stock

            By 

            from belvidere, il

            About Me Casual Driver

            See all my reviews

            Ask me a question

            Verified Buyer
            3 or more reviews submitted

            Pros

            • Fit As Described

            Cons

            • Taking The Old One Off

            Best Uses

            • Replacement

            Comments about Carquest Wearever Brake Rotor - Rear:

            fit right, in stock,

            (2 of 3 customers found this review helpful)

             
            5.0

            Good Value

            By 

            from Orleans, IN

            About Me Auto Enthusiast, Casual Driver, Truck Enthusiast

            See all my reviews

            Verified Buyer
            3 or more reviews submitted

            Pros

            • Easy To Install

            Cons

              Best Uses

              • Everyday Driving
              • Replacement

              Comments about Carquest Wearever Brake Rotor - Rear:

              Good Value

              (1 of 3 customers found this review helpful)

               
              4.0

              better than oem

              By 

              from Kingwood,TX

              About Me Auto Enthusiast

              Verified Buyer

              Pros

              • Better Than Stock
              • Easy To Install
              • No Fade

              Cons

              • None Vented

              Best Uses

              • Everyday Driving
              • Replacement

              Comments about Carquest Wearever Brake Rotor - Rear:

              The rotors seem to be a better quality over OEM.

              (2 of 4 customers found this review helpful)

               
              5.0

              Excellent product

              By 

              from West Chester, Pa

              About Me Auto Enthusiast, Casual Driver

              Verified Buyer

              Pros

              • Decreased Stopping Distance
              • Easy To Install
              • Lightweight

              Cons

                Best Uses

                • Everyday Driving

                Comments about Carquest Wearever Brake Rotor - Rear:

                The rotor's were easy to install.

                Displaying reviews 1-10

                Back to top

                Do you have questions about this product?

                 

                Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

                3 Questions | 3 Answers
                Displaying questions 1-3
                • Q:

                  do these come drilled and slotted?
                  Asked on 10/16/2013 by tracy from providence, ri

                  1 answer

                  • CUSTOMER CARE

                    A:

                    Hi Tracy, this Wearever Brake Rotor - Part No. YH145725 is a drilled rotor.

                    Answered on 10/17/2013 by Morgan from AAP
                • Q:

                  is this product designed for ceramic brake pads
                  Asked on 6/22/2011 by nej from TN

                  1 answer

                  • CUSTOMER CARE

                    A:

                    No, any brake pads can be used.

                    Answered on 7/19/2011 by DIY Daniel from AAP
                • Q:

                  Is this part made in the USA?
                  Asked on 1/15/2011 by TC from OH

                  1 answer

                  • CUSTOMER CARE

                    A:

                    Yes, it is manufactured in USA.

                    Answered on 2/18/2011 by Parts Guru Geo from AAP
                Displaying questions 1-3

                Do you have a question about this product? 

                Check out the specials in our monthly flyer.
                 
                 
                Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.