Brake Rotor - Rear
Hover over the image to zoom in
Share this:
Get up to a $20 rebate by purchasing Carquest Wearever Gold Brake Pads and (2) two Carquest Rotors. See Rebates page for details.

Carquest Wearever Brake Rotor - Rear

Part No. YH145299 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

CARQUEST Wearever Rotors are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design and non-directional finish that eliminates noise and enhances pedal feel. CARQUEST Wearever Rotors are designed to dissipate heat helping to eliminate brake fade and increase the life of your pads. Ready to install out of the box to save you time. 

Product Features:
  • Manufactured to exacting quality and dimensional specifications for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Proper harmonic design helps to reduce brake noise
  • Non-directional finish for less break-in time and reduced brake noise
  • Ready for immediate "out-of-the-box" installation (after cleaning)
Back To Top
ABS Sensor Ring Included:No
Bolt Circle Diameter:5.31 in
Bolt Hole Quantity:5
Construction:Full Cast
Disc Finish:Non-Directional
Discard Thickness:12 mm
Grade Type:Regular
Hat Finish:Plain
Height:2.2 in
Inside Diameter:244.5 mm
Material:G3000
Nominal Thickness:14 mm
Outside Diameter:13.13 in
Rust Resistant Coating:No
Slotted:No
Solid Or Vented Type Rotor:Vented
Stud Thread Diameter:15.7 mm
Surface Type:Dimpled

REVIEW SNAPSHOT®

by PowerReviews
Carquest WeareverBrake Rotor - Rear
 
4.1

(based on 32 reviews)

Ratings Distribution

  • 5 Stars

     

    (14)

  • 4 Stars

     

    (14)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (3)

90%

of respondents would recommend this to a friend.

Pros

  • Easy to install (17)
  • Decreased stopping distance (4)
  • No fade (3)

Cons

No Cons

Best Uses

  • Everyday driving (17)
  • Replacement (12)
    • Was this a gift?:
    • No (5)
    • Reviewer Profile:
    • Auto enthusiast (7), Casual driver (6), Truck enthusiast (5), Mechanic (3)

Most Liked Positive Review

 

2000 F150 4wd perfect fit

I just installed these on the back of my 2000 4wd F-150. These rotors have a great, solid feel to them and fit perfectly on the rears. I have been lucky with...Read complete review

I just installed these on the back of my 2000 4wd F-150. These rotors have a great, solid feel to them and fit perfectly on the rears. I have been lucky with this brand of rotor and never feel that I should have gone more expensive despite the multiple vehicles I used them on. The rebate with the pads sealed the deal for me this time around. With basic hand tools, you can do a rear brake job. I would not hesitate to purchase these again once the front brakes are due, I'll stick with the same setup.

VS

Most Liked Negative Review

 

Poor Quality Control at the Manufacturing Facility

I replaced the Rear Brake Rotors on my 2000 F150 while I was replacing the wheel bearings and one axle shaft that went bad. 

The first rotor took some...Read complete review

I replaced the Rear Brake Rotors on my 2000 F150 while I was replacing the wheel bearings and one axle shaft that went bad. 

The first rotor took some "persuasion" to install... I didn't like that, however assumed it was because of the new aftermarket axel shaft/hub/lugs (also bought from Advanced Auto Parts) and that maybe one or two of the lugs were not perfectly oriented in the hub?

I moved to the other side of the truck and the new rotor simply would NOT slide on... even with hitting it with some 3lb persuasion, pulling it off, rotating it one bolt hole at a time again and again... it wasn't going to go. The problem?.... the large center hole that allows the rotor to slide past the hub was off-center. There was no way that this rotor was going on this original Ford axle/hub.

So I had to reinstall the old rotor. Next day, I exchanged the rotor for a replacement. The counter rep understood what I was telling him and confirmed it after placing the new replacement rotor on top of the one that I was returning, he said, "you're right, the hole is off center".

I installed this one without effort... slid on like it was supposed to, no persuading needed. This prompted me to remove the other rotor that was installed on the new axel and return it for exchange too... just had a bad feeling about it and didn't want issue later. Its replacement also slipped over the (new aftermarket) lugs and hub with no hesitation.

I don't know what happened with the first two rotors, but those should not have passed the quality inspection in India, China or Taiwan, where it was made.

So I had to do the brake job twice and spent a lot of extra time, brake cleaner and headache over something that normally doesn't take me long at all to do... going to have to make serious consideration before buying these rotors again. Although the installed rotors seem to be working just fine. "Let's get you back on the road" wasn't helped by this first set of rotors...

My final complaint... rotors were purchased online at discount... when making a warranty exchange I was refunded purchase price... however I was required to re-purchase the replacement rotor at regular price...

Reviewed by 32 customers

Displaying reviews 1-10

Back to top

Previous | Next »

 
5.0

I would buy again

By 

from undisclosed

See all my reviews

Verified Buyer
3 or more reviews submitted

Comments about Carquest Wearever Brake Rotor - Rear:

appears to be a good quality rotor

 
5.0

Yes

By 

from SC

Verified Buyer

Comments about Carquest Wearever Brake Rotor - Rear:

Easy to install good quality

  • Was this a gift?:
  • No
 
5.0

Good rotor, good fit

By 

from Flower Mound

Verified Buyer

Comments about Carquest Wearever Brake Rotor - Rear:

This rotor fit as expected, and appears to be well constructed.

  • Was this a gift?:
  • No
 
5.0

High quality rotors

By 

from undisclosed

Verified Buyer

Comments about Carquest Wearever Brake Rotor - Rear:

Replaced my old out of round rotors with these and the truck brakes smooth as can be.

 
5.0

Good Product

By 

from Rogers, Arkansas

Verified Buyer

Pros

  • Exact fit

Cons

  • none with this part

Best Uses

    Comments about Carquest Wearever Brake Rotor - Rear:

    The Rogers Ar. store has a great group of people working there that are always going out of the way to make sure their customers are taken care of, made sure parts were exact fit, took care of any problem.

    • Was this a gift?:
    • No
     
    5.0

    2000 F150 4wd perfect fit

    By 

    from Florida

    See all my reviews

    Verified Buyer
    3 or more reviews submitted

    Pros

    • Great Price
    • Perfect Fit

    Cons

      Best Uses

        Comments about Carquest Wearever Brake Rotor - Rear:

        I just installed these on the back of my 2000 4wd F-150. These rotors have a great, solid feel to them and fit perfectly on the rears. I have been lucky with this brand of rotor and never feel that I should have gone more expensive despite the multiple vehicles I used them on. The rebate with the pads sealed the deal for me this time around. With basic hand tools, you can do a rear brake job. I would not hesitate to purchase these again once the front brakes are due, I'll stick with the same setup.

        • Was this a gift?:
        • No
         
        4.0

        I would buy this product again.

        By 

        from Fairfield, OH

        See all my reviews

        Verified Buyer
        3 or more reviews submitted

        Comments about Carquest Wearever Brake Rotor - Rear:

        Fit exactly as the original equipment.

        • Was this a gift?:
        • No
         
        5.0

        Great rotors.

        By 

        from Savannah ga

        See all my reviews

        Verified Buyer
        3 or more reviews submitted

        Pros

          Cons

          • None

          Best Uses

            Comments about Carquest Wearever Brake Rotor - Rear:

            Good rotors. Not warped out of the box.

             
            1.0

            Was given 2 different rotars which is a problem because reme

            By 

            from Lowell Ma

            Verified Buyer

            Comments about Carquest Wearever Brake Rotor - Rear:

            Don't know still on jacks

             
            4.0

            looks to be adequate.

            By 

            from nj

            Verified Buyer

            Pros

            • inexpensive

            Cons

            • none

            Best Uses

              Comments about Carquest Wearever Brake Rotor - Rear:

              Fast installation and a fair price.

              Displaying reviews 1-10

              Back to top

              Previous | Next »

              Do you have questions about this product?

               

              Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

              8 Questions | 8 Answers
              Displaying questions 1-8
              • Q:

                where are Carquest rotors ( front and rear) made ?
                Asked on 6/27/2016 by chuck

                1 answer

                • CUSTOMER CARE

                  A:

                  Hi Chuck, I'm glad to assist you! Carquest is a retailer. This Brake Rotor - Part No. YH145299 is originally manufactured by Bendix in USA.

                  Answered on 6/27/2016 by Solomon from AAP
              • Q:

                what would you recommend to use remove stuck rotors?
                Asked on 9/17/2015 by Roy from Weaverville, NC

                1 answer

                • CUSTOMER CARE

                  A:

                  Hi Roy, happy to help you! There are many different ways to remove a stuck brake rotor, ranging from simple solutions to those that take much longer to complete and require professional tools. You can remove the stuck brake rotors by using a large rubber mallet, rotor puller, or acetylene torch. However, I would suggest that you take your vehicle and get it thoroughly checked by a certified mechanic before starting your project in order to avoid any intermittent.

                  Answered on 9/17/2015 by Steve from AAP
              • Q:

                is that price for 1 rotor or is that for the rear set
                Asked on 9/8/2015 by dont have one from elgin sc

                1 answer

                • CUSTOMER CARE

                  A:

                  Hi! This Carquest Wearever Brake Rotor - Rear (Part No. YH145299) is sold individually.

                  Answered on 9/8/2015 by Solomon
              • Q:

                Is this for a standard F150 truck not a 4x4
                Asked on 12/12/2013 by Sal from Alabama

                1 answer

                • CUSTOMER CARE

                  A:

                  Hey Sal. If you provide your vehicle information, I would be able to give you more information for what fits. I will need the year, sub model F150 if applicable (XL, XLT, Lariat, King Ranch, etc.) engine size, and if it is four or two wheel drive (4WD or 2WD).

                  Answered on 12/13/2013 by Keith from AAP
              • Q:

                will this fit 2001 lincoln navigator 4x4
                Asked on 3/15/2012 by jojo from newark,oh

                1 answer

                • CUSTOMER CARE

                  A:

                  Yes, this part Wearever Brake Rotor, Part No. YH145299 manufactured by Wearever fits your 2001 Lincoln Navigator 4x4.

                  Answered on 3/15/2012 by Aaron from AAP
              • Q:

                Does this fit a 2002 ford expedition, 5.4 engine, 4x4??? Rear Rotor..
                Asked on 11/21/2011 by Anonymous

                1 answer

                • CUSTOMER CARE

                  A:

                  Yes, this part fits your 2002 Ford Expedition 5.4 engine, 4x4.
                  Yes, this part is for Rear side.

                  Answered on 11/22/2011 by Aaron from AAP
              • Q:

                How hard is it to take the rear rotor off?? I'm having difficulties??
                Asked on 9/16/2011 by Petescamaro from Brown Deer,Wi

                1 answer

                • CUSTOMER CARE

                  A:

                  For help with your project, I recommend purchasing a Haynes repair manual specifically for your vehicle. This should be able to assist you further into detail on how to repair or replace specific parts.

                  Answered on 9/16/2011 by Aaron from AAP
              • Q:

                DOES IT FIT 4X4 AND LEFT AND RIGHT REAR
                Asked on 5/15/2011 by Anonymous

                1 answer

                • CUSTOMER CARE

                  A:

                  Yes, it will fit for both the rear driver side and rear passenger side.

                  Answered on 5/16/2011 by DIY Daniel from AAP
              Displaying questions 1-8

              Do you have a question about this product? 

              Check out the specials in our monthly flyer.
               
               
              Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.