Brake Rotor - Rear
Hover over the image to zoom in
Share this:

Carquest Wearever Brake Rotor - Rear

Part No. YH145260 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

CARQUEST Wearever Rotors are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design and non-directional finish that eliminates noise and enhances pedal feel. CARQUEST Wearever Rotors are designed to dissipate heat helping to eliminate brake fade and increase the life of your pads. Ready to install out of the box to save you time. 

Product Features:
  • Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • OE configuration to dissipate heat, increasing pad life
  • Proper harmonic design helps to reduce brake noise
  • Non-directional finish for less break-in time and reduced brake noise
  • Ready for immediate "out-of-the-box" installation (after cleaning)
Back To Top
ABS Sensor Ring Included:No
Bolt Circle Diameter:6.5 in
Bolt Hole Quantity:8
Construction:Full Cast
Disc Finish:Non-Directional
Discard Thickness:27 mm
Grade Type:Regular
Height:3.65 in
Inside Diameter:225 mm
Material:G3000
Nominal Thickness:29 mm
Outside Diameter:12.99 in
Rust Resistant Coating:No
Slotted:No
Solid Or Vented Type Rotor:Vented
Stud Thread Diameter:16.4 mm
Surface Type:Smooth

REVIEW SNAPSHOT®

by PowerReviews
Carquest WeareverBrake Rotor - Rear
 
4.3

(based on 44 reviews)

Ratings Distribution

  • 5 Stars

     

    (28)

  • 4 Stars

     

    (9)

  • 3 Stars

     

    (4)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (3)

88%

of respondents would recommend this to a friend.

Pros

  • Easy to install (29)
  • Decreased stopping distance (15)
  • Lightweight (5)
  • No fade (3)

Cons

No Cons

Best Uses

  • Everyday driving (24)
  • Replacement (19)
    • Car & Truck:
    • Truck enthusiast (4)
    • Was this a gift?:
    • No (7)
    • Reviewer Profile:
    • Casual driver (17), Truck enthusiast (13), Mechanic (8), Auto enthusiast (5)

Most Liked Positive Review

 

Just installed, and so far so good:)

Rotor was less expensive than some others, but am very pleased with it so far

Rotor was less expensive than some others, but am very pleased with it so far

VS

Most Liked Negative Review

 

wrong rotors

Rotors were fine except that they werent the ones for my 2005 chevy 2500. I had to bring them back. The part numbers matched what was supposed to be given to me according to...Read complete review

Rotors were fine except that they werent the ones for my 2005 chevy 2500. I had to bring them back. The part numbers matched what was supposed to be given to me according to this website but when they pulled up my vehicle at the store it showed a different part. Have them check the store computer before you leave with your parts!

Reviewed by 44 customers

Displaying reviews 1-10

Back to top

Previous | Next »

 
1.0

This rotor split in two

By 

from New Jersey

See all my reviews

3 or more reviews submitted

Comments about Carquest Wearever Brake Rotor - Rear:

Replaced both sides at the same time on a 2009 3500 HD Dual rear wheels. The rotor on the drivers side split in two. Never seen that happen before. The other side is fine.

  • Was this a gift?:
  • No
 
5.0

Oops that was suppose to be the pads

By 

from Saginaw Mi

Verified Buyer

Comments about Carquest Wearever Brake Rotor - Rear:

Rotors were fine. Pads had no sliders

  • Was this a gift?:
  • No
 
4.0

No sliders in box

By 

from Saginaw Mi

Verified Buyer

Comments about Carquest Wearever Brake Rotor - Rear:

Great product with no sliders. Store didn't have any available to sell me either.

  • Was this a gift?:
  • No
 
1.0

Had to modify it to fit

By 

from Michigan

Verified Buyer

Comments about Carquest Wearever Brake Rotor - Rear:

The edge of the inside parking brake drum extends too far out the back of the rotor. I had to machine off 1/4 inch to prevent binding on the backing plate. Application was a 2004 GMC Sierra 2500.

  • Was this a gift?:
  • No
 
5.0

perfect fit

By 

from Sault Sainte Marie, MI

See all my reviews

Verified Buyer

Pros

  • Good Value

Cons

  • None

Best Uses

    Comments about Carquest Wearever Brake Rotor - Rear:

    Perfect match to OE

    • Was this a gift?:
    • No
     
    5.0

    Great Value!!

    By 

    from Tazewell, VA

    See all my reviews

    Verified Buyer

    Comments about Carquest Wearever Brake Rotor - Rear:

    Great bang for the buck!!!!! It was also my first experience with Advance Autos online ordering and the Speed Perks program! Both of which turned out to be flawless!! I had ordered the products Carquest Wearever Rear Brake Rotor and a set of rear brake pads for my 2006 Chevrolet Silverado 2500 With the Duramax so this vehicle definitely sees some pulling and brake abuse. I ordered the parts and when I went to the store I told the parts associate my name and he walked to the back of the store got my parts and I was gone!!

    • Was this a gift?:
    • No
     
    5.0

    Easy to install

    By 

    from Luxemburg, WI

    See all my reviews

    Ask me a question

    Verified Buyer
    3 or more reviews submitted

    Comments about Carquest Wearever Brake Rotor - Rear:

    Easy to install, good rotor-brake drum combo.

    • Was this a gift?:
    • No
     
    5.0

    excellent

    By 

    from waynesboro pa

    About Me Casual Driver, Mechanic, Truck Enthusiast

    Verified Buyer

    Pros

    • Decreased Stopping Distance
    • Easy To Install
    • Lightweight

    Cons

    • None

    Best Uses

    • Everyday Driving
    • Replacement

    Comments about Carquest Wearever Brake Rotor - Rear:

    happy

     
    4.0

    Good product, wish it was manufactured in the USA

    By 

    from Champion, pA

    About Me Casual Driver

    Verified Buyer

    Pros

      Cons

        Best Uses

        • Replacement

        Comments about Carquest Wearever Brake Rotor - Rear:

        Rear Rotors seem good quality and easy installation.

         
        5.0

        So far so good

        By 

        from Blue Springs, MO

        Verified Buyer

        Comments about Carquest Wearever Brake Rotor - Rear:

        I use these brakes on the back my 2003 Chevy Silverado 2500 HD 6.6 L Duramax. They went on easy and stop the truck well.

        Displaying reviews 1-10

        Back to top

        Previous | Next »

        Do you have questions about this product?

         

        Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

        9 Questions | 10 Answers
        Displaying questions 1-9
        • Q:

          I have a 2004 Chev 2500HD 4x4, 6.6 diesel. Will this rotor fit?
          Asked on 8/25/2016 by Bud

          1 answer

          • CUSTOMER CARE

            A:

            No, Bud, this Carquest Wearever Brake Rotor - Rear (Part No. YH145260) is not an exact fit for your 2004 Chevrolet Silverado 2500 HD 6.6L 4X4. We do have an exact rear brake rotor available online for your vehicle and the part number is YH145466. Please enter your vehicle on our website and search for this part to check the fitment.

            Answered on 8/26/2016 by Steve from AAP
        • Q:

          What is the diameter of the center hole ? this is not listed in the specs
          Asked on 9/28/2013 by ?nickname from Grafton, NY

          1 answer

          • CUSTOMER CARE

            A:

            Hi, for any further assistance regarding the Wearever Brake Rotor - Rear (Part No. YH145260), please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

            Answered on 9/30/2013 by Steve from AAP
        • Q:

          i have a 2005 crew cab 4x4 silverado 2500hd with 6.0. will this rotor fit the rear wheels
          Asked on 12/7/2012 by mike from winchester virginia

          1 answer

          • CUSTOMER CARE

            A:

            Yes, this Wearever Brake Rotor -(Part No. YH145260) is an exact fit for the rear wheels of your 2005 Chevrolet Silverado 2500 HD. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto store and one of our representatives will gladly assist you with any questions or concerns you may have.

            Answered on 12/7/2012 by Aaron from AAP
        • Q:

          Does this rotor fit a 2000 Chevy 2500 HD with gross weight over 8600?
          Asked on 6/3/2012 by Anonymous

          1 answer

          • CUSTOMER CARE

            A:

            Yes, this Wearever Brake Rotor - Part No. YH145260 fits your 2000 Chevrolet 2500 HD.

            Answered on 6/5/2012 by Steve from AAP
        • Q:

          will this rotor also fit a 4w.d.
          Asked on 4/22/2012 by Tom from casco me.

          1 answer

          • CUSTOMER CARE

            A:

            In order to check the exact fit application of this Wearever Brake Rotor with part# YH145260, please provide the year, make, model and engine size of the vehicle.

            Answered on 4/22/2012 by Vincent from AAP
        • Q:

          this truck shows 2 different center hole sizes one is a 4.63 in. the othe is 4.84 ins there is no specs on the rotor
          Asked on 2/11/2012 by jeff from mount vernon,ky

          1 answer

          • CUSTOMER CARE

            A:

            To help you in a better manner, if you could please include the year, make, model and engine specification of the vehicle and we would be better able to assist you.

            Answered on 2/13/2012 by Aaron from AAP
        • Q:

          where r these rotors manuf. at
          Asked on 9/19/2011 by rusty from ches. oh.

          1 answer

          • CUSTOMER CARE

            A:

            I am sorry that the information about the origin of a product is highly confidential and this information has not been provided to us by the manufacturer as they may have different warehouses in several countries.

            Answered on 9/20/2011 by Dennis from AAP
        • Q:

          how do i remove the rear brake rotor on my 2005 gmc 2500 4x4
          Asked on 7/25/2011 by Anonymous

          2 answers

          • CUSTOMER CARE

            A:

            For help with your project, I recommend purchasing a repair manual specifically for your vehicle. This should be able to assist you further into detail on how to repair or replace specific parts.

            Answered on 7/27/2011 by Steve from AAP
          • A:

            first remove caliper and caliper bracket. make sure e brake isnt on cause there is a drum and shoes inside the rotor. spray tons of pb blaster tap a few times with a hammer around the wheel studs then pry like hell rotate and pry some more.

            Answered on 2/3/2012 by sparkplugstan from jacksonville nc
        • Q:

          does this fit a dully 350
          Asked on 5/23/2010 by Anonymous

          1 answer

          • CUSTOMER CARE

            A:

            For further assistance, can you provide the year and engine size of your vehicle.

            Answered on 5/24/2010 by Mike from AAP
        Displaying questions 1-9

        Do you have a question about this product? 

        Check out the specials in our monthly flyer.
         
         
        Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.