Brake Rotor - Front
Hover over the image to zoom in
Share this:

Carquest Wearever Brake Rotor - Front

Part No. YH145309 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

CARQUEST Wearever Rotors are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design and non-directional finish that eliminates noise and enhances pedal feel. CARQUEST Wearever Rotors are designed to dissipate heat helping to eliminate brake fade and increase the life of your pads. Ready to install out of the box to save you time. 

Product Features:
  • Manufactured to exacting quality and dimensional specifications for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Proper harmonic design helps to reduce brake noise
  • Non-directional finish for less break-in time and reduced brake noise
  • Ready for immediate "out-of-the-box" installation (after cleaning)
Back To Top
Bolt Circle Diameter:6.69 in
Bolt Hole Quantity:8
Discard Thickness:36 mm
Height:3.86 in
Nominal Thickness:38 mm
Outside Diameter:14.53 in

REVIEW SNAPSHOT®

by PowerReviews
Carquest WeareverBrake Rotor - Front
 
1.0

(based on 3 reviews)

Ratings Distribution

  • 5 Stars

     

    (0)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (3)

Reviewed by 3 customers

Displaying reviews 1-3

Back to top

(0 of 1 customers found this review helpful)

 
1.0

Does not fit 2004 F250 5.4

By 

from Hebron CT

Verified Buyer

Comments about Carquest Wearever Brake Rotor - Front:

Do not buy if it is for the Ford F-250 2004. 5.4. Site says exact fit. They are to big and caliper does not go on.

Comment on this reviewHelp Icon

(0 of 1 customers found this review helpful)

 
1.0

Does not fit

By 

from Grenwood, IN

Comments about Carquest Wearever Brake Rotor - Front:

If you are buying these for a 2002 4x4 7.3, you're going to need the 13"/331 mm rotors. These are 14.5" and you cannot install the brake caliper with the bigger rotors.

Comment on this reviewHelp Icon

(5 of 11 customers found this review helpful)

 
1.0

does not meet oem specs for my vehicle

By 

from il

About Me Na

Verified Buyer
Helpful Reviewer

Pros

  • Na

Cons

  • Dose Not Fit Ford F250

Best Uses

  • Na

Comments about Carquest Wearever Brake Rotor - Front:

Product said it would fit 2000 ford f250 4x4. so after taking front end apart to find out the rotors are 1.5" bigger than oem. i had to drive to my local store and pay more for the correct rotors of the same brand. was not happy.

Comment on this reviewHelp Icon

Displaying reviews 1-3

Back to top

Do you have questions about this product?

 

Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

4 Questions | 5 Answers
Displaying questions 1-4
  • Q:

    does this item fit my 2003 2 wheel drive pickup.
    Asked on 12/27/2011 by dale from nokomis, fl

    1 answer

    • CUSTOMER CARE

      A:

      In order to check the exact fit application of this part Wearever Brake Rotor - Front with part# YH145309, please provide the make, model and engine size of the vehicle.

      Answered on 12/27/2011 by Vincent from AAP
  • Q:

    What is the difference between the 13 inch diameter and 14.50 inch diameter front rotors for 2004 F250 Super Duty?
    Asked on 12/24/2011 by Anonymous

    1 answer

    • CUSTOMER CARE

      A:

      F250-F350 SD with axle ratios higher than 4.33 will have larger diameter 14" and 14.53" while the others (less than 4.33) will have a diameter of 13". For your 2004 F250 Super Duty 14.53" is the exact fit.

      Answered on 12/27/2011 by John the Car-Doc from AAP
  • Q:

    Is this for a single rotor, or the front set?

    likewise; are brake pads listed as a set, or per wheel?
    Asked on 4/28/2010 by Khoop from Seattle, Wa

    1 answer

    • CUSTOMER CARE

      A:

      Brake rotors are sold individually. The brake pad sets come in a package of four brake pads.

      Answered on 4/28/2010 by Kevin from AAP
  • Q:

    How do I know if my F250 4x4 has 13inch or 14inch brakes?
    Asked on 3/5/2010 by Anonymous

    2 answers

    • CUSTOMER CARE

      A:

      The best way to find out if your truck has the 13" or 14" brakes is to go out and measure the diameter or the rotors on your truck.

      Answered on 3/5/2010 by Mike from AAP
    • A:

      If your 99'-04' F250 4x4 was built on or after 3/15/99-2004 it should be 13" rotor from what I am told. If your 99' F250 4x4 was built on or before 3/14/99-98 will be the 14.5" rotor. Hope this helps!

      Answered on 6/16/2011 by Brett from Independence, MO
Displaying questions 1-4

Do you have a question about this product? 

Check out the specials in our monthly flyer.
 
 
Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.