Brake Hydraulic Hose
Hover over the image to zoom in
Brake Hydraulic Hose
Share this:

Carquest Wearever Brake Hydraulic Hose

Part No. BHA380902 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

Direct replacement Hydraulic Brake Hoses are designed to fit specific vehicle applications and positions. This ensures a great fit every time. New hose replacement is recommended as part of a complete brake repair for your vehicle. The new hoses help to prevent loss of brake fluid and provide optimal brake performance.

Product Features:
  • Quality construction ensures strength, chemical and thermal resistance for longer life
  • Brake Hoses with banjo end fittings include new copper washers to ensure proper sealing
  • All Brake Hoses are tested up to 4,000 PSI to ensure Safety standards are met
  • Integral brackets, if applicable, included to ensure proper fit and ease of installation
Back To Top
Bracket Material:Stamped Steel
End 1 Fitting Type:Banjo - 10 mm
End 2 Fitting Type:Female - M10 x 1.0
Gasket Or Seal Included:Yes
Hose Material:EPDM Rubber
Mounting Hardware Included:No

REVIEW SNAPSHOT®

by PowerReviews
Carquest WeareverBrake Hydraulic Hose
 
2.8

(based on 4 reviews)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (2)

50%

of respondents would recommend this to a friend.

Reviewed by 4 customers

Displaying reviews 1-4

Back to top

 
4.0

Fit perfectly just like OEM...Hoping for durability

By 

from Minneapolis, MN

About Me Mechanic

See all my reviews

Verified Buyer
3 or more reviews submitted

Pros

  • Easy To Install
  • Good Fit
  • Includes Copper Washers

Cons

  • Only 1 Year Warranty

Best Uses

  • Everyday Driving

Comments about Carquest Wearever Brake Hydraulic Hose:

Unlike other reviews, I had no problems with fit on this brake hose. The length of the hose was identical to the factory hose, and the hard line 10mm nut screwed in perfectly. The steel support bracket was in the perfect place as well. I installed this on a 1997 RAV4 AWD with badly cracked hoses. I HIGHLY recommend that you soak the 10mm nut on the hard line in penetrating oil overnight before even attempting to remove it. Also, use a flare wrench if at all possible! You will strip the nut if you use a normal open end wrench. I was able to do both hoses on a nearly 20 year old RAV4 here in the rust belt by using this method. Be VERY gentle and slowly work the wrench back and forth after you crack that nut loose. My only issue with this brake hose: 1 year warranty. Would hope for at least 2 or 3 years. Hopefully it will last longer that a year.

Comment on this reviewHelp Icon

 
1.0

just barely fits

By 

from midwest, usa

Comments about Carquest Wearever Brake Hydraulic Hose:

the hose between the banjo fitting and the midway mounting bolt needs to be longer. the hose is bent at a sharp 90 degree angle. and this is where it will probably fail.

Comment on this reviewHelp Icon

(1 of 1 customers found this review helpful)

 
5.0

H380902 by Wearever Driver side - Front

By 

from Reynoldsburg, Ohio

About Me Everyday Driver

See all my reviews

Verified Buyer

Pros

  • Decreased Stopping Distance
  • Easy To Install
  • Perfect fit

Cons

  • Wrong Item Email Link

Best Uses

  • Everyday Driving

Comments about Carquest Wearever Brake Hydraulic Hose:

H380902 is for the Wearever driver side front. This part was a perfect fit for my 96 Toyota Rav4, 5 door. ( Rear door w/tire mount ) Components are right were they should be. What a difference it made after all these years of faithful service by the original parts. My brakes work fine now. When you get this part make sure to look for label saying which side the hose attaches to. When I got these 5/1/2013 the bag did not say and we found when my brother and I replaced hoses that it does matter which side hose goes on. Not the same lenght for each side so you may have to write Driver/Front to be sure. Ask sales clerk to verify.

Comment on this reviewHelp Icon

(0 of 1 customers found this review helpful)

 
1.0

Poor Quality

By 

from Fairfax, VA

Pros

    Cons

    • Difficult To Install

    Best Uses

      Comments about Carquest Wearever Brake Hydraulic Hose:

      Stay away. Both the left & right front brake hoses from Tru-Torque were junk. The left one top coupling would not fit the brake line nipple (tried the right hose on the left nipple and it fit fine). The right hose came with a center mount that would not fit the stabilizer plate on the wheel. Taking both back tomorrow

      Comment on this reviewHelp Icon

      Displaying reviews 1-4

      Back to top

      Check out the specials in our monthly flyer.
       
       
      Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.