Starter - Remanufactured
Hover over the image to zoom in
Share this:
Free Starter testing! Most vehicles, most locations. See store for details.

CARQUEST Starter - Remanufactured

Part No. 17740S Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications.

This starter has been computer load tested and mechanically and visually inspected. Designed, manufactured and assembled to promote improved long-term reliability.
Back To Top
Diameter:70 mm
Direct Drive:No
Drive Tooth Quantity:8
Gear Reduction:Yes
Gear Reduction Ratio:5 r
Horsepower Rating:1.8774 hp
Mounting Bolt(s) Included:No
Mounting Shims Included:No
Nose Cone Type:Closed
OE Manufacturer:Mitsubishi
Overall Length:201 mm
Solenoid Attached:Yes
Starter Type:Mitsubishi Permanent Magnet Direct Drive
Voltage:12 v
kW Rating:1.4 kw

REVIEW SNAPSHOT®

by PowerReviews
CARQUESTStarter - Remanufactured
 
5.0

(based on 2 reviews)

Ratings Distribution

  • 5 Stars

     

    (2)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 2 customers

Displaying reviews 1-2

Back to top

 
5.0

like factory new

By 

from hicksville

About Me Casual Driver

Verified Buyer

Pros

  • Durable

Cons

    Best Uses

    • Small Cars

    Comments about CARQUEST Starter - Remanufactured:

    for my car works great starter was hard to install

    • Was this a gift?:
    • No

    Comment on this reviewHelp Icon

    (0 of 1 customers found this review helpful)

     
    5.0

    I would buy this product again good buy.

    By 

    from Tampa, Florida

    Pros

      Cons

        Best Uses

        • Small Cars

        Comments about CARQUEST Starter - Remanufactured:

        Exelent product for the price.

        Comment on this reviewHelp Icon

        Displaying reviews 1-2

        Back to top

        Do you have questions about this product?

         

        Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

        2 Questions | 2 Answers
        Displaying questions 1-2
        • Q:

          Does it matter if my car is automatic or standard?
          Asked on 4/7/2014 by joel

          1 answer

          • CUSTOMER CARE

            A:

            Hi Joel, glad to assist you! Since this part is vehicle specific, please provide us the year, make, model and engine size of your vehicle.

            Answered on 4/8/2014 by Steve from AAP
        • Q:

          What's the best way to get this starter out?
          Asked on 5/6/2013 by David from Atlanta, GA

          1 answer

          • CUSTOMER CARE

            A:

            Instructions to remove a starter: 1. Disconnect the cable from the negative battery terminal using a wrench or ratchet and secure the cable away from the positive terminal. 2. Lift the front of the vehicle with a floor jack and set it safely on a pair of jack stands for support. 3. Move away or remove any part that might prevent you from reaching the starter motor. 4. Remove the heat shield or bracket protecting the starter if any. Place aside any removed part along with its bolts or nuts if possible for easy identification and quick re-installation. 5. Disconnect the wires from the solenoid if it is mounted on the starter motor. Make sure to mark or label these wires so they can be reconnected later at their respective terminals. 6. Remove the battery cable from the starter motor. 7. Loosen the bolts or nuts that secure the starter motor to the engine or transmission bell housing. At this point, it is very important to make a note of the exact location and number of shims, if any, placed between the engine and the starter motor. Shims help adjust the distance between the pinion gear and the flywheel ring gear. Without these shims, the gears may be damaged. 8. Firmly hold the starter motor as you finish taking out the bolts or nuts that attach the motor to the engine. The starter is somewhat heavy. 9. Take the starter motor out of the engine compartment. To replace the starter, follow these steps in reverse order. For on-starter solenoid motors, first reconnect any wires to their respective terminals at the solenoid before securing the starter to the engine. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

            Answered on 5/6/2013 by Steve from AAP
        Displaying questions 1-2

        Do you have a question about this product? 

        Check out the specials in our monthly flyer.
         
         
        Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.