Fuel Strainer
Hover over the image to zoom in
Share this:

CARQUEST or Airtex Fuel Strainer

Part No. FS22 Warranty  

See if this part fits a specific vehicle.

Check Vehicle Fit

Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications.

CARQUEST or Airtex gradient density fuel pump strainers deliver reliable filtration and are the first line of defense against fuel system contaminants.

Product Features:
  • Gradient density provides optimum multi-depth layering of filter media specific for each application
  • Maximum filtering for increased fuel filter, fuel pump and fuel system life
  • New strainer required to validate new fuel pump warranty.
Back To Top
Attachment Type:Push Fit
Inlet Inside Diameter:0.509
Inlet Type:Push
Length:5.75
Material:Gradient Density
Micron Rating:60 mc
Width:1.5

REVIEW SNAPSHOT®

by PowerReviews
AirtexFuel Strainer
 
3.7

(based on 7 reviews)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (4)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (1)

  • 1 Stars

     

    (0)

83%

of respondents would recommend this to a friend.

Pros

    Cons

      Best Uses

          • Reviewer Profile:
          • Mechanic (3)
          • Was this a gift?:
          • No (5)

        Reviewed by 7 customers

        Sort by

        Displaying reviews 1-7

        Back to top

        (8 of 16 customers found this review helpful)

         
        4.0

        Works

        By Enthusist

        from Middle Georgia

        About Me Mechanic

        Verified Buyer
        3 or more reviews submitted

        Pros

        • Works

        Cons

        • Hard to install

        Best Uses

        • Trucks

        Comments about Airtex Fuel Strainer:

        none

        • Was this a gift?:
        • No

        Comment on this review(earn points)

        (5 of 10 customers found this review helpful)

         
        4.0

        Fits Airtex pump

        Comments about Airtex Fuel Strainer:

        Real pain to get this on, still have an indention in my finger but I suppose it shouldn't fit loose. When installing make sure you get it pushed on completely and even on all sides. Kinda a cloth material, seems like it should be durable.

        Comment on this review(earn points)

        (6 of 11 customers found this review helpful)

         
        4.0

        Installs and performs as expected

        By s-15

        from Palmyra, Va

        About Me Auto Enthusiast, Casual Driver, Mechanic, Truck Enthusiast

        Verified Buyer
        Level 2

        Pros

          Cons

            Best Uses

              Comments about Airtex Fuel Strainer:

              Installs and performs as expected

              • Was this a gift?:
              • No

              Comment on this review(earn points)

              (5 of 9 customers found this review helpful)

               
              2.0

              Tough to fit on pump

              By subman631

              from NE Georgia

              About Me Auto Enthusiast

              Ask me a question

              Verified Buyer
              3 or more reviews submitted

              Pros

              • Satisfies Guarantee

              Cons

              • Tough To Fit On Pump

              Best Uses

                Comments about Airtex Fuel Strainer:

                This part is made by the same manufacturer as the fuel pump I used so you would think it would fit easily. Wrong. I played heck trying to get it slipped onto the end of the pump. You would think there would be some kind of lock up but no, you just push like heck and hope it stays on!

                • Was this a gift?:
                • No

                Comment on this review(earn points)

                (5 of 10 customers found this review helpful)

                 
                3.0

                Bought to install on Airtex fuel pump

                By The Grinch

                from Saint Marys, GA

                About Me Mechanic

                Verified Buyer
                Level 2

                Pros

                • Fits Onto Airtex Pump

                Cons

                  Best Uses

                  • Airtex Fuel Pump

                  Comments about Airtex Fuel Strainer:

                  Installed in a 1991 S10 4.3 liter 4x4 pickup, onto an Airtex fuel pump. Strainer fit and finish seems ok. I have used Airtex fuel pumps in the past and they do not last. I replaced them with Bosch pumps. I have a stack of sparsely used Airtex strainers but bought a new one because I intend to use the warranty to replace this one instead of eating the cost. I went with Airtex only because Bosch is not available at Advance and I needed to get back on the road. Recommend the pump and strainer to be the same brand for compatibility and warranty reasons.

                  • Was this a gift?:
                  • No

                  Comment on this review(earn points)

                  (14 of 25 customers found this review helpful)

                   
                  4.0

                  GOOD PRODUCT FOR PRICE

                  By ROB

                  from HARTFORD, CT

                  About Me Casual Driver

                  Verified Buyer
                  Level 2

                  Pros

                  • Easy To Use

                  Cons

                    Best Uses

                    • Trucks

                    Comments about Airtex Fuel Strainer:

                    WORKS FINE FOR THE PRICE

                    • Was this a gift?:
                    • No

                    Comment on this review(earn points)

                    (17 of 32 customers found this review helpful)

                     
                    5.0

                    Advance auto is the only place I get par

                    By Mom

                    from Marion, NC

                    Verified Buyer
                    Helpful Reviewer

                    Comments about Airtex Fuel Strainer:

                    The parts I get from you are always the best quality. I don't go anywhere else for parts. You have the best prices [...]

                    Comment on this review(earn points)

                    Displaying reviews 1-7

                    Back to top

                    Do you have questions about this product?(earn points for answers!)

                     

                    Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.

                    3 Questions | 4 Answers
                    Displaying questions 1-3
                    • Q:

                      Where is the fuel strainer on a 1987 ford e150 econoline 5.0 302ci v8
                      Asked on 5/22/2011 by Bunyan from Semora NC

                      2 answers

                      • CUSTOMER CARE

                        A:

                        The fuel filter is usually located near to the fuel line somewhere between the fuel tank and the carburetor. You can trace the fuel filter start from your carburetor, it usually mounted on the engine with bolt nut or mounted to the car body near to engine bay.

                        Answered on 5/23/2011 by Just Ask Jacob! from AAP
                      • CUSTOMER CARE

                        A:

                        The fuel filter is usually located near to the fuel line somewhere between the fuel tank and the carburetor. You can trace the fuel filter start from your carburetor, it usually mounted on the engine with bolt nut or mounted to the car body near to engine bay.

                        Answered on 5/23/2011 by Just Ask Jacob! from AAP
                    • Q:

                      where is it located on vehicle
                      Asked on 5/21/2011 by Anonymous

                      1 answer

                      • CUSTOMER CARE

                        A:

                        On carburetor fuel system, the fuel filter is usually located near to the fuel line somewhere between the fuel tank and the carburetor. On fuel injected cars, the fuel filter normally mounted under the car in the fuel line between the fuel tank and the engine.

                        Answered on 5/23/2011 by Just Ask Jacob! from AAP
                    • Q:

                      Would this part cause my truck to stutter or flood because it will stop and I will have to wait before I can crank it up.
                      Asked on 2/16/2011 by Papa Tee from Jackson, MS

                      1 answer

                      • CUSTOMER CARE

                        A:

                        A bad fuel strainer can cause an engine to hesitate, or stumble, engine stalling, a rough engine idle and a bad fuel filter completely stops fuel flow to a vehicle's engine, the vehicle will not start.

                        Answered on 5/4/2011 by David the Dynamite Parts Guy from AAP
                    Displaying questions 1-3

                    Do you have a question about this product? 

                    Create or view your online garage

                    Check out the specials in our monthly flyer

                     
                     
                    Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.