New CV Axle Shaft Assembly
Hover over the image to zoom in
Share this:

CARQUEST CV Shafts New CV Axle Shaft Assembly

Part No. NCV69520 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

All CARQUEST axles have a new zinc dichromate plated nut or attaching hardware. CV joint grease has a high moly content. The boot bands are made from stainless steel, and the boots are manufactured to resist wear and damage due to extreme high and low temperatures.

Product Features:
  • 100% New Axle
  • Each part number is tested to guarantee that the axle is proper fit
  • Limited lifetime warranty
  • Quality engineered for superior durability
  • Tested for reliable performance
  • No Core Exchange
  • High-quality neoprene boots ensure durability and longevity
  • CV joints are assembled with a specially formulated high temperature moly grease to resist friction and wear
  • Spline are machined to OE specifications
  • New stainless steel clamps
  • All of the axles are made of strictly inspected materials to ensure a long and trouble free performance
  • Coated with a protective surface to resist rust
Back To Top
Axle Material:Steel, Neoprene
New Or Remanufactured:New
Spindle Nut Included:Yes
Spline Quantity:26 OBJ / 23 IBJ

REVIEW SNAPSHOT®

by PowerReviews
CARQUEST CV ShaftsNew CV Axle Shaft Assembly
 
3.9

(based on 10 reviews)

Ratings Distribution

  • 5 Stars

     

    (4)

  • 4 Stars

     

    (4)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (1)

  • 1 Stars

     

    (1)

89%

of respondents would recommend this to a friend.

Pros

  • Easy to use (3)

Cons

No Cons

Best Uses

  • Small cars (6)
    • Was this a gift?:
    • No (9)
    • Reviewer Profile:
    • Mechanic (5)

Most Liked Positive Review

 

Axle Shaft Adventures

1994 Toyota Corolla Base, 5 speed, 220000 mis. - For a while I had been noticing a bit of a rattle when I drove over rough surfaces and thought it was possibly a...Read complete review

1994 Toyota Corolla Base, 5 speed, 220000 mis. - For a while I had been noticing a bit of a rattle when I drove over rough surfaces and thought it was possibly a strut going bad. It was most noticeable when I was turning left (sound came from front end, right side of car). About a week ago I started to notice that whenever I straightened out from a left-hand turn the car would 'sway' a bit. My son was driving the car one evening and pulled in to a shop to get a sandwich. As he turned to enter the parking space he heard a bang and a clunk. I showed up about 15 minutes later expecting a tire issue of some sort. The ball joint had separated and the hub was no longer attached to the lower arm. Subsequent to the ball joint failing, the axle broke (snapped in two). After pushing it into a parking space using a floor jack (front wheel would not roll as it was now bound up against the trailing edge of the wheel well) I returned home ordered a replacement axle and ball joint online through Advance that night. The next morning my brother ran to pick up the parts for me while I waited for the tow truck in the parking lot where my son had broken down. Once I had the car back at my brother's garage, it took just a few hours to pull what was left of the old axle and install the new one along with the ball joint. All in all, this was a fairly simple and straightforward process. I am thankful that this didn't happen at speed and that no one was injured, especially my son. In the future, I will be much more proactive in finding and fixing the cause of the sounds and actions\reactions of my car. After a couple hundred miles, this axle seems to be performing just fine.

VS

Most Liked Negative Review

 

Bad Tranny Seal

I had to buy a tranny seal which was another 12.41 and lucky i used the old clip after the cv fell out and had to redo the job...

I had to buy a tranny seal which was another 12.41 and lucky i used the old clip after the cv fell out and had to redo the job...

Reviewed by 10 customers

Displaying reviews 1-10

Back to top

 
5.0

Looks good

By 

from Nj

Verified Buyer

Comments about CARQUEST CV Shafts New CV Axle Shaft Assembly:

Seems to strong

  • Was this a gift?:
  • No
 
2.0

Bad Tranny Seal

By 

from Rochester New York

Verified Buyer

Comments about CARQUEST CV Shafts New CV Axle Shaft Assembly:

I had to buy a tranny seal which was another 12.41 and lucky i used the old clip after the cv fell out and had to redo the job...

  • Was this a gift?:
  • No
 
4.0

Complete CV Axle

By 

from ny

About Me Mechanic

Verified Buyer

Comments about CARQUEST CV Shafts New CV Axle Shaft Assembly:

Came well protected in the box , came with all hardware to install

  • Was this a gift?:
  • No

(6 of 13 customers found this review helpful)

 
5.0

CV Shaft worked great

By 

from Rochester,NY

About Me Mechanic

See all my reviews

Ask me a question

Verified Buyer
3 or more reviews submitted

Pros

  • No Core Required

Cons

    Best Uses

    • Small Cars

    Comments about CARQUEST CV Shafts New CV Axle Shaft Assembly:

    Some people replace CV shafts ONLY if boot/boots are visibly torn OR have lost all grease due to some type of rupture. These things actually DO wear out, even if NO grease was ever lost. Best way to diagnose whether U might need them replaced would be: Car over 150K miles AND you hear sort of "knocking" noises that are most noticeable when on smooth [normal] road...but when you drive over some SHALLOW potholes or "washboard" areas...very light or NO throttle
    the looseness /knocking noises are the worst.
    NOW Drive over same area[potholes or washboard]with moderate throttle, and if looseness/knocking noise becomes substantially less...you probably DO need new CV shafts. Do this test at least 3 times, and be sure tire pressures [all 4]are near normal. Also, check for couple loose pop bottles or lug wrench not secure in trunk !! GOOD LUCK.

    • Was this a gift?:
    • No

    (4 of 8 customers found this review helpful)

     
    5.0

    Worht the investment!

    By 

    from Galesburg,IL

    About Me Auto Enthusiast, Mechanic

    See all my reviews

    Ask me a question

    3 or more reviews submitted

    Pros

    • Durable
    • Easy To Use

    Cons

      Best Uses

      • Small Cars

      Comments about CARQUEST CV Shafts New CV Axle Shaft Assembly:

      Easy to install and well worth the money spent!

      • Was this a gift?:
      • No

      (6 of 12 customers found this review helpful)

       
      5.0

      good product, new ,not rebuilt.

      By 

      from halifax ma

      About Me Mechanic

      Verified Buyer
      Helpful Reviewer

      Pros

      • Easy To Use

      Cons

        Best Uses

        • Small Cars

        Comments about CARQUEST CV Shafts New CV Axle Shaft Assembly:

        this a good product at a great price,and it was in stock at my local store

        • Was this a gift?:
        • No

        (7 of 12 customers found this review helpful)

         
        4.0

        Axle Shaft Adventures

        By 

        from Saratoga Springs, NY

        About Me Daily commuter

        See all my reviews

        Ask me a question

        Verified Buyer
        3 or more reviews submitted

        Pros

        • Easy to install
        • Reasonably Priced

        Cons

          Best Uses

          • Small Cars

          Comments about CARQUEST CV Shafts New CV Axle Shaft Assembly:

          1994 Toyota Corolla Base, 5 speed, 220000 mis. - For a while I had been noticing a bit of a rattle when I drove over rough surfaces and thought it was possibly a strut going bad. It was most noticeable when I was turning left (sound came from front end, right side of car). About a week ago I started to notice that whenever I straightened out from a left-hand turn the car would 'sway' a bit. My son was driving the car one evening and pulled in to a shop to get a sandwich. As he turned to enter the parking space he heard a bang and a clunk. I showed up about 15 minutes later expecting a tire issue of some sort. The ball joint had separated and the hub was no longer attached to the lower arm. Subsequent to the ball joint failing, the axle broke (snapped in two). After pushing it into a parking space using a floor jack (front wheel would not roll as it was now bound up against the trailing edge of the wheel well) I returned home ordered a replacement axle and ball joint online through Advance that night. The next morning my brother ran to pick up the parts for me while I waited for the tow truck in the parking lot where my son had broken down. Once I had the car back at my brother's garage, it took just a few hours to pull what was left of the old axle and install the new one along with the ball joint. All in all, this was a fairly simple and straightforward process. I am thankful that this didn't happen at speed and that no one was injured, especially my son. In the future, I will be much more proactive in finding and fixing the cause of the sounds and actions\reactions of my car. After a couple hundred miles, this axle seems to be performing just fine.

          • Was this a gift?:
          • No

          (4 of 8 customers found this review helpful)

           
          4.0

          Good qualty product

          By 

          from Grandview Tennessee

          About Me Casual Driver, I drive 140 miles a day, Mechanic

          Verified Buyer
          Helpful Reviewer

          Pros

          • Easy To Use

          Cons

          • None

          Best Uses

          • Small Cars

          Comments about CARQUEST CV Shafts New CV Axle Shaft Assembly:

          good product

          • Was this a gift?:
          • No

          (6 of 13 customers found this review helpful)

           
          4.0

          As advertised...

          By 

          from Saratoga Springs, NY

          About Me Casual Driver

          See all my reviews

          Ask me a question

          Verified Buyer
          3 or more reviews submitted

          Pros

          • Did the job
          • Resonably priced

          Cons

            Best Uses

            • Small Cars

            Comments about CARQUEST CV Shafts New CV Axle Shaft Assembly:

            For a while I was noticing a bit of a rattle in the front end when I drove over rough surfaces and thought it was the strut going bad. It was most evident when I was turning left (sound came from front right side of car). About a week before the the incident it seemed like whenever I straightened out from a left-hand turn the car would 'sway' a bit. Finally, my son was driving the car one evening and pulled in to a shop to get a sandwich. As he entered the parking space he heard a bang and a clunk. I showed up about 15 minutes later expecting a tire issue. The ball joint had separated and the wheel hub was no longer attached to the lower arm. In the process, the axle was broken (snapped). I ordered a replacement online through Advance that evening. The next morning my brother ran to pick up the parts for me while I waited for the tow truck in the parking lot where my son had broken down. Once I had the car back to my brother's garage it took just a few hours to pull what was left of the old axle and install the new axle and ball joint. All in all, this was a fairly simple and straightforward process. I am thankful that this didn't happen at speed and that no one was injured (especially my son). In the future, I will be more proactive and pay much closer attention to any unusual sounds and actions\reactions of my car.

            • Was this a gift?:
            • No

            (6 of 13 customers found this review helpful)

             
            1.0

            Disappointing

            By 

            from MA

            See all my reviews

            Verified Buyer
            Helpful Reviewer

            Comments about CARQUEST CV Shafts New CV Axle Shaft Assembly:

            Right out of the box, both CV joints on this new axle assy had almost as much play as the old ones I was replacing. Very disappointing for a brand new axle.

            Displaying reviews 1-10

            Back to top

            Do you have questions about this product?

             

            Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

            2 Questions | 2 Answers
            Displaying questions 1-2
            • Q:

              This cv axle have a gear on the HUD side where as my 2001 chevy prizm is smooth , is this a cv axle shaft part that is a universal for abs and none abs? Is this gear suppose to be removed or will it fit where the original fit, where as the original did not have this gear on it?
              Asked on 5/3/2013 by Hank from Chicago il.

              1 answer

              • CUSTOMER CARE

                A:

                This ToughOne New CV Axle Shaft Assembly - part# NCV69520 is for front right and is an exact fit for your 2001 Chevrolet Prizm without any modifications. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have

                Answered on 5/5/2013 by Vincent from AAP
            • Q:

              What happens if you tighten the end bolt to tight???
              Asked on 8/30/2011 by Mike from Sault Ste. Marie

              1 answer

              • CUSTOMER CARE

                A:

                There will be a squeeze sound in the axle shaft assembly when the end bolts are tighten to the maximum level.

                Answered on 9/7/2011 by DIY Daniel from AAP
            Displaying questions 1-2

            Do you have a question about this product? 

            Check out the specials in our monthly flyer.
             
             
            Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.