New CV Axle Shaft Assembly
Hover over the image to zoom in
Share this:

CARQUEST CV Shafts New CV Axle Shaft Assembly

Part No. NCV12559 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

All CARQUEST axles have a new zinc dichromate plated nut or attaching hardware. CV joint grease has a high moly content. The boot bands are made from stainless steel, and the boots are manufactured to resist wear and damage due to extreme high and low temperatures.

Product Features:
  • 100% New axle
  • Each part number is tested to guarantee that the axle is proper fit
  • Limited lifetime warranty
  • Quality engineered for superior durability
  • Tested for reliable performance
  • No core exchange
  • High-quality neoprene boots ensure durability and longevity
  • CV joints are assembled with a specially formulated high temperature moly grease to resist friction and wear
  • Spline are machined to OE specifications
  • New stainless steel clamps
  • All of the axles are made of strictly inspected materials to ensure a long and trouble free performance and coated with a protective surface to resist rust
Back To Top
ABS Brakes:Yes
Axle Material:Steel, Neoprene
Location:FD
New Or Remanufactured:New
Spindle Nut Included:Yes
Spindle Nut Wrench Size:M22*1.5
Spline Quantity:26 OBJ / 25 IBJ
Transmission Type:AT
Wheel Drive Type:Front

REVIEW SNAPSHOT®

by PowerReviews
CARQUEST CV ShaftsNew CV Axle Shaft Assembly
 
1.7

(based on 3 reviews)

Ratings Distribution

  • 5 Stars

     

    (0)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (2)

0%

of respondents would recommend this to a friend.

Pros

No Pros

Cons

No Cons

Best Uses

No Best Uses
    • Was this a gift?:
    • No (3)

Reviewed by 3 customers

Displaying reviews 1-3

Back to top

(0 of 3 customers found this review helpful)

 
3.0

2003 volvo s60 base

By 

from florida kissimme

Pros

    Cons

    • Incompatible

    Best Uses

      Comments about CARQUEST CV Shafts New CV Axle Shaft Assembly:

      Just so everyone know this will not fit on a base 2003 Volvo s60 front wheel drive,

      • Was this a gift?:
      • No
       
      1.0

      damaged when received

      By 

      from Greenville,SC

      About Me Mechanic, Truck Enthusiast

      Pros

      • Cheap

      Cons

      • CHEAP

      Best Uses

      • Paper weight

      Comments about CARQUEST CV Shafts New CV Axle Shaft Assembly:

      picture is never as good as holding in hand. Returning both to local store. grease cap on one already popped off during shipping and bearings were loose in box. The other is not seated properly either. Not confident installing behind a diesel engine.

      • Was this a gift?:
      • No

      (3 of 6 customers found this review helpful)

       
      1.0

      not as good as remanufactured

      By 

      from Sayre,Pa

      About Me Casual Driver

      Pros

      • Easy To Use

      Cons

      • Flimsy

      Best Uses

      • Small Cars

      Comments about CARQUEST CV Shafts New CV Axle Shaft Assembly:

      bought this because it was a quicker and easyer than replacing the boot however these are [*] not the best quality mine is leaking at less than one year old.

      • Was this a gift?:
      • No

      Displaying reviews 1-3

      Back to top

      Do you have questions about this product?

       

      Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

      7 Questions | 8 Answers
      Displaying questions 1-7
      • Q:

        The band clamp rusted and broke because the has been sitting for a year or so. I bought the cv about 3 years ago. Is this covered in the limited lifetime warranty? This is on an 01 dodge neon r/t front drivers side.
        Asked on 11/16/2016 by Andy from 47987

        1 answer

        • CUSTOMER CARE

          A:

          I'm glad to assist, Andy! I am sorry to hear that the CV Axle Shaft Assembly - Part No. NCV12559 purchased from us is not performing well as expected and I can understand your disappointment in this situation. We will replace or refund, at our option, any part that may fail due to a defect in materials or workmanship under normal use and service after proper installation, within the warranty period stated on your original sales receipt. Warranty issues can be handled effectively only when you bring the defective part to an Advance Auto Parts store along with your original sales receipt / a print out of your order confirmation email. To process a warranty claim, you may bring the defective part to any Advance Auto Parts store along with your original sales receipt / a print out of your order confirmation email and the Store Manager will be in a better position to assist you with your warranty replacement inquiry.

          Answered on 11/17/2016 by Solomon from AAP
      • Q:

        does this axle even fit my car? it says possible replacement . what kind of junk is that?
        Asked on 5/8/2013 by gweedo from daytona beach fl

        1 answer

        • CUSTOMER CARE

          A:

          In order to assist you further about ToughOne New CV Axle Shaft Assembly - Part No. NCV12559, please provide the year, make, model and engine size of your vehicle application or you can contact us directly at 1-877-ADVANCE (238-2623) or visit your nearest Advance Auto Parts store for further assistance.

          Answered on 5/8/2013 by Morgan from AAP
      • Q:

        is this left or right? are they both the same?
        Asked on 5/8/2013 by gweedo from daytona beach fl

        1 answer

        • CUSTOMER CARE

          A:

          This ToughOne New CV Axle Shaft Assembly (Part No. NCV12559) is for Front Driver(Left) side. Front Driver Side(Left) and Front Passenger Side(Right) is not same. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

          Answered on 5/9/2013 by Max from AAP
      • Q:

        The facorty part I am replacing has the balance on it and is 28 inches long. The part that the store recommends does not have the balance and is only 26 inches long. Why is this case and will it work with the shorter length. Please respond as soon as possible because I have already removed part and need it working.
        Asked on 12/15/2012 by Tony from groveland, fl

        1 answer

        • CUSTOMER CARE

          A:

          For further assistance regarding the ToughOne New CV Axle Shaft Assembly (Part No. NCV12559), please provide the year, make, model and engine size of your vehicle. For more information, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.

          Answered on 12/17/2012 by Steve from AAP
      • Q:

        I am looking at buying this axle shaft for my moms car (a 2007 hyundai sonata GLS) i have both axles in my cart but i want to make sure that its the right axle for her car since i'm a way at college currently. If it is the right axle, does it come with a locking type nut or do i have to buy locktight or a spindle pin for it.
        Asked on 12/13/2012 by Thomas

        1 answer

        • CUSTOMER CARE

          A:

          No, this ToughOne New CV Axle Shaft Assembly (Part No. NCV12559) does not fit your 2007 Hyundai Sonata GLS. The exact fit CV axle shaft assembly for your vehicle is currently unavailable online. For further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.

          Answered on 12/14/2012 by Steve from AAP
      • Q:

        purchased mine 6 months back, it came with no spindle nut,and no hole in the spindle shaft to use a split pin to lock the old nut, now it comes loose every few months, cant seems to buy a self locking nut that will fit, shoud i drill a hole in the shaft so i can use a split pin ? or can i use a regular self locking nylock nut ?
        Asked on 4/8/2012 by Anonymous

        2 answers

        • CUSTOMER CARE

          A:

          Yes, you can drill a hole in the shaft. Try to drill them with a regular drill. If it is too hard, try a carbide drill or endmill to start the hole and countersink it a bit, then switch to regular drill. If it can be drilled with a HSS drill it can be tapped. (using a high quality tap, properly), or thread milled or single pointed.

          Answered on 4/14/2012 by John the Car-Doc from AAP
        • A:

          if you don't want to drill I would try a high quality lock nut maybe blue locktite even the removeable kind

          Answered on 5/16/2012 by larry from sayre,pa
      • Q:

        What, if any special tools are required to install?
        TX Dan
        Asked on 7/22/2010 by Dan from FL

        1 answer

        • CUSTOMER CARE

          A:

          To further assist you on this questions could you provide us your vehicle's year, make, model, and engine size.

          Answered on 7/22/2010 by Kevin from AAP
      Displaying questions 1-7

      Do you have a question about this product? 

      Check out the specials in our monthly flyer.
       
       
      Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.