New CV Axle Shaft Assembly
Hover over the image to zoom in
Share this:

CARQUEST CV Shafts New CV Axle Shaft Assembly

Part No. NCV10622 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

All CARQUEST axles have a new zinc dichromate plated nut or attaching hardware. CV joint grease has a high moly content. The boot bands are made from stainless steel, and the boots are manufactured to resist wear and damage due to extreme high and low temperatures.

Product Features:
  • 100% New axle
  • Each part number is tested to guarantee that the axle is proper fit
  • Limited lifetime warranty
  • Quality engineered for superior durability
  • Tested for reliable performance
  • No core exchange
  • High-quality neoprene boots ensure durability and longevity
  • CV joints are assembled with a specially formulated high temperature moly grease to resist friction and wear
  • Spline are machined to OE specifications
  • New stainless steel clamps
  • All of the axles are made of strictly inspected materials to ensure a long and trouble free performance and coated with a protective surface to resist rust
Back To Top
ABS Brakes:No
Axle Material:Steel, Neoprene
Location:FD/FP
New Or Remanufactured:New
Spindle Nut Included:Yes
Spindle Nut Wrench Size:M24*2
Spline Quantity:30 OBJ / 34 IBJ
Transmission Speeds:4
Transmission Type:AT
Wheel Drive Type:Front

REVIEW SNAPSHOT®

by PowerReviews
CARQUEST CV ShaftsNew CV Axle Shaft Assembly
 
4.0

(based on 3 reviews)

Ratings Distribution

  • 5 Stars

     

    (2)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (1)

  • 1 Stars

     

    (0)

67%

of respondents would recommend this to a friend.

Pros

No Pros

Cons

No Cons

Best Uses

No Best Uses
    • Was this a gift?:
    • No (3)

Reviewed by 3 customers

Displaying reviews 1-3

Back to top

 
5.0

Exactly what I needed

By 

from San Antonio, TX

Verified Buyer

Comments about CARQUEST CV Shafts New CV Axle Shaft Assembly:

Came completely assembled, and fit perfectly no problems at all

  • Was this a gift?:
  • No

Comment on this reviewHelp Icon

(2 of 4 customers found this review helpful)

 
2.0

Not as good as OEM

By 

from Longview, TX

About Me Mechanic

Pros

  • Gets it back on the road
  • Price
  • Warranty

Cons

  • Flimsy
  • Lacks Quality

Best Uses

  • If You Plan To Sell Soon

Comments about CARQUEST CV Shafts New CV Axle Shaft Assembly:

First one lasted 20k miles. It started making popping sounds when turning. If wasn't going to sell the car soon, I'd replace it with an OEM from AC Delco.

  • Was this a gift?:
  • No

Comment on this reviewHelp Icon

(2 of 4 customers found this review helpful)

 
5.0

Very good product

By 

from Germany

About Me Casual Driver

Verified Buyer

Pros

  • Durable
  • High-Performance
  • Versatile

Cons

    Best Uses

    • Large Cars
    • Small Cars

    Comments about CARQUEST CV Shafts New CV Axle Shaft Assembly:

    Very good product

    • Was this a gift?:
    • No

    Comment on this reviewHelp Icon

    Displaying reviews 1-3

    Back to top

    Do you have questions about this product?

     

    Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

    6 Questions | 6 Answers
    Displaying questions 1-6
    • Q:

      front ;left cv joint making whining noise only gets louder when make right turns on curves i guess from side load.. cud this be going out?
      Asked on 11/25/2015 by dave from odessa texas 79765

      1 answer

      • CUSTOMER CARE

        A:

        Hi dave, I'm glad to assist you. Your CV Axle Shaft Assembly should be the problem. However, I would suggest that you take your vehicle and get it thoroughly checked by a certified mechanic before buying any parts that may/may not solve the problem.

        Answered on 11/26/2015 by Solomon from AAP
    • Q:

      Do these possibly squeal when they go bad, like wheel bearings did on some of the older vehicles?
      Asked on 4/11/2014 by Todd from Littleton, CO

      1 answer

      • CUSTOMER CARE

        A:

        Yes, a bad cv axle shaft will make creaking/popping noises. I would suggest that you to take your vehicle and get it thoroughly checked by a certified mechanic before buying any parts that may/may not solve the problem.

        Answered on 4/12/2014 by Steve from AAP
    • Q:

      would i need to replace the cv axle if when i turn my car makes a clicking noise i have been told its the cv joint any ideas? Thanks.
      Asked on 2/6/2014 by Tommy from Alliance ohio

      1 answer

      • CUSTOMER CARE

        A:

        Hi Tommy, the CV axle may be the possible cause for a clicking noise when turning on your vehicle. However, the answer to that is perhaps a bit more complicated than you think. This really may need a mechanic’s expertise to determine. I would suggest taking your vehicle to a certified mechanic for a proper diagnosis before buying and having parts installed that may not solve or be the problem.

        Answered on 2/9/2014 by Vincent from AAP
    • Q:

      how do you get the inboard spline shaft off the old cv axle 2007 malibu max ls
      Asked on 12/13/2012 by larry from franklin pa

      1 answer

      • CUSTOMER CARE

        A:

        With reference to your query on ToughOne New CV Axle Shaft Assembly - (Part No. NCV10622), the instructions are as follows. Remove the front wheel on the side the axle is being replaced. Remove the brake caliper and brake rotor. Next, remove the cotter pin then remove the large nut that is holding the hub bearing in place. At this point, take a punch and center it on the CV shaft and tap on it with a hammer. This will help loosen the splines then remove it.

        Answered on 12/14/2012 by Aaron from AAP
    • Q:

      Is the CV Axle the same as a Drive Axle?
      Asked on 2/1/2011 by Travis from Tallahassee

      1 answer

      • CUSTOMER CARE

        A:

        Yes

        Answered on 2/2/2011 by Parts Guru Geo from AAP
    • Q:

      Are CV joints and Axles the samething?
      Asked on 2/1/2011 by Travis from Tallahassee

      1 answer

      • CUSTOMER CARE

        A:

        No. An axle is the part that the wheel hub rides on; it holds the weight of the vehicle.
        The C/V (constant velocity joint) is a part of the drive shaft (like a U-joint) that delivers the engine torque to the wheels.

        Answered on 2/1/2011 by David the Dynamite Parts Guy from AAP
    Displaying questions 1-6

    Do you have a question about this product? 

    Check out the specials in our monthly flyer.
     
     
    Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.