TECHnovation Clutch Slave Cylinder
Hover over the image to zoom in
Share this:

CARQUEST Clutch TECHnovation Clutch Slave Cylinder

Part No. 360005 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

Designed and engineered for faster installation than original equipment using existing lines and no special tools. OEM plastic cylinders can be prone to cracking/breakage. TECHnovation Clutch Hydraulics aluminum castings are made from solid blocks that are bored and honed for accurate tolerances and maximum durability.
Back To Top
Bore Size:21 mm
Inlet Size(s):12 mm

REVIEW SNAPSHOT®

by PowerReviews
CARQUEST ClutchTECHnovation Clutch Slave Cylinder
 
3.0

(based on 2 reviews)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (1)

Reviewed by 2 customers

Displaying reviews 1-2

Back to top

 
1.0

Terrible ( i will break it down)

By 

from tampa, Fl

Comments about CARQUEST Clutch TECHnovation Clutch Slave Cylinder:

Twice now I have given this slave a try. The bolts on either side tear out with little tightening. twice had 1 side come out 2nd time both. the rubber washer disintegrated and neither have responded to any pressurizing. Worst of all the bleeder screw leaked on both....How is this product on the market>????

Comment on this reviewHelp Icon

(3 of 3 customers found this review helpful)

 
5.0

Follow instruction - How to bleed

By 

from South Carolina

Verified Reviewer

Pros

  • Durable
  • Easy To Install
  • Lightweight
  • Provides Smooth Shifting

Cons

    Best Uses

    • Everyday Driving

    Comments about CARQUEST Clutch TECHnovation Clutch Slave Cylinder:

    Follow instruction "how to bleed"If possible see you tube videos[@]Bleeding external slave cylinders with bleed screws.

    • Car & Truck:
    • Designer

    Comment on this reviewHelp Icon

    Displaying reviews 1-2

    Back to top

    Do you have questions about this product?

     

    Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

    5 Questions | 5 Answers
    Displaying questions 1-5
    • Q:

      How do you bleed the slave cylinder
      Asked on 9/17/2013 by DW from Del Rio

      1 answer

      • CUSTOMER CARE

        A:

        With reference to your inquiry on the Perfection Clutch TECHnovation Clutch Slave Cylinder - Part No. 360005, kindly follow the instructions to bleed your slave cylinder. Place the box end wrench over the bleeder valve on the clutch slave cylinder. The exact location of the cylinder will vary depending on the make and model of your vehicle. The cylinder will usually be a long cylindrical component with hard steel lines from the clutch master cylinder running through it. The valve itself looks like a small screw with a hole in the center of it sticking out of the side of the cylinder. Orient the wrench so that it fits snug over the nut at the base of the screw. Slide the clear plastic tubing over the end of the bleeder valve. Place the other end of the tubing into a catch pan or jar. Have an assistant press on the clutch and hold in down to the floor. The clutch pedal should remain pressed to the floor. Open the bleeder valve to release the pressure in the clutch fluid lines. Make sure that your assistant does not release the pedal pressure on the clutch. It needs to stay pressed onto the floor; otherwise, air will be drawn into the line. You will see fluid and air bubbles rushing out of the valve through the plastic tubing. Close the valve by turning it clockwise until it is tight. Repeat steps 3, 4, and 5 until the lines have no more air in them. Check the clutch master cylinder reservoir levels periodically to ensure the clutch fluid does not drop below the lower or "min" line on the reservoir tank. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

        Answered on 9/17/2013 by Morgan from AAP
    • Q:

      what is the travel distance on the push rod, 1 inch?
      Asked on 5/17/2012 by Anonymous

      1 answer

      • CUSTOMER CARE

        A:

        The distance that the push rod travels on the slave cylinder when the clutch pedal is pressed should be around 16mm approximately.

        Answered on 5/18/2012 by Vincent from AAP
    • Q:

      Is a special tool needed to remove the clutch slave cylinder from the transmission?
      Asked on 12/16/2011 by Anonymous

      1 answer

      • CUSTOMER CARE

        A:

        The tools required to replace the clutch slave cylinder are Floor jack, Jack stands, Set of 3/8-inch drive sockets, 3/8-inch drive ratchet, One can of brake fluid, Set of wrenches and Wire cutters.

        Answered on 12/18/2011 by Steve from AAP
    • Q:

      do you have to take transmission down to install
      Asked on 12/1/2011 by Anonymous

      1 answer

      • CUSTOMER CARE

        A:

        For the installation instructions, if you could please provide the year, make, model and engine size of the vehicle and we would be better able to assist you.

        Answered on 12/1/2011 by Steve from AAP
    • Q:

      Is there a bleeder valve or spot on this part?
      Asked on 7/12/2011 by Anonymous

      1 answer

      • CUSTOMER CARE

        A:

        We greatly appreciate your taking time to submit a review. Please call us at 1-877-ADVANCE (238-2623) and we would be more than happy to assist you.

        Answered on 7/20/2011 by Start with Shane! from AAP
    Displaying questions 1-5

    Do you have a question about this product? 

    Check out the specials in our monthly flyer.
     
     
    Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.