Curved Radiator Hose
Hover over the image to zoom in
Share this:

CARQUEST by Dayco Curved Radiator Hose

Part No. E72027 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

Dayco Molded Radiator and By-Pass Hoses are designed to provide the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations required for a superior performance replacement hose.

Product Features:
  • Made with synthetic EPDM rubber compounds that provide resistance to deterioration from ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C)
  • The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose
  • Meets SAE J20R4, Class D-1 requirements for improved service hose
  • Meets Type EC electro-chemical requirements as specified in SAE J1684; which eliminates premature deterioration of the inner tube caused by the build up of static electric charges
Back To Top
Color:Black
End 1 Inside Diameter:1 3/4 in
End 1 Outside Diameter:2 1/8
End 2 Inside Diameter:1 3/4 in
End 2 Outside Diameter:2 1/8
End 3 Inside Diameter:3/4
End 4 Inside Diameter:3/4
Heat Shield:N
Hose Type:Branched Hose
Material:EPDM
Protective Sleeve Attached:N
SAE Approved:SAE J20R4 Class D-1, SAE J1684 Type EC

REVIEW SNAPSHOT®

by PowerReviews
CARQUEST by DaycoCurved Radiator Hose
 
2.5

(based on 2 reviews)

Ratings Distribution

  • 5 Stars

     

    (0)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (1)

Reviewed by 2 customers

Displaying reviews 1-2

Back to top

(1 of 1 customers found this review helpful)

 
1.0

Time tells a different story.

By 

from Melbourne, Florida

Pros

  • Easy To Install

Cons

  • Hose connection leaks

Best Uses

    Comments about CARQUEST by Dayco Curved Radiator Hose:

    I also wrote the first review. After 500 miles I find that both large clamps at the oil cooler "T" are seeping. I would of preferred that Dayco would of charge $2 more and used real clamps or even shipped with no clamps. How much would two worm drive clamps of cost Dayco? I will have to remove their junk and install "real" clamps.

    • Car & Truck:
    • Auto Enthusiast, Truck Enthusiast

    Comment on this reviewHelp Icon

     
    4.0

    Seems to be a good quality made part

    By 

    from Melbourne, Florida

    Pros

    • Durable
    • Easy To Install

    Cons

      Best Uses

      • Everyday Driving
      • Replacement

      Comments about CARQUEST by Dayco Curved Radiator Hose:

      No issues with this part. Not the most fun to install but it fit perfectly. Well satisfied with the fit and quality at half the price of a competitors product. Did not rate perfect because only time will tell.

      • Car & Truck:
      • Truck Enthusiast

      Comment on this reviewHelp Icon

      Displaying reviews 1-2

      Back to top

      Do you have questions about this product?

       

      Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

      2 Questions | 2 Answers
      Displaying questions 1-2
      • Q:

        is there a check valve is the center having back pressure with no termastat
        Asked on 5/21/2015 by buddy from greencove fl

        1 answer

        • CUSTOMER CARE

          A:

          Happy to answer you question Buddy! This radiator hose does not have a check valve in that middle section.

          Answered on 5/23/2015 by Panda from AAP
      • Q:

        can you tell me what size the hose is that goes to the oil cooler?
        Asked on 11/28/2014 by bill

        1 answer

        • CUSTOMER CARE

          A:

          I'm glad to assist, Bill! The hose for your oil cooler is 5/16". This CARQUEST by Dayco Curved Radiator Hose (Part No. E72027) is the lower radiator hose for your 2003 Ford F-250 Super Duty Pickup with the 5.4L V8. Here are the specifications for this hose: Large Inner Diameter is 1.75" or 1-3/4", Small Inner Diameter is 1.75" or 1-3/4", the hose length is 27-1/2". The transmission cooler line is Dorman - OE Solutions Automatic Transmission Cooler Line (Part No. 624-253).

          Answered on 12/8/2014 by Heath, ASE Parts Specialist from AAP
      Displaying questions 1-2

      Do you have a question about this product? 

      Check out the specials in our monthly flyer.
       
       
      Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.