Curved Radiator Hose
Hover over the image to zoom in
Share this:

CARQUEST by Dayco Curved Radiator Hose

Part No. E71999 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

Dayco Molded Radiator and By-Pass Hoses are designed to provide the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations required for a superior performance replacement hose.

Product Features:
  • Made with synthetic EPDM rubber compounds that provide resistance to deterioration from ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C)
  • The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose
  • Meets SAE J20R4, Class D-1 requirements for improved service hose
  • Meets Type EC electro-chemical requirements as specified in SAE J1684; which eliminates premature deterioration of the inner tube caused by the build up of static electric charges
Back To Top
Color:Black
End 1 Inside Diameter:1 7/16
End 1 Outside Diameter:1 13/16
End 2 Inside Diameter:1 7/16
End 2 Outside Diameter:1 13/16
End 3 Inside Diameter:15/16
Heat Shield:N
Hose Type:Branched Hose
Material:EPDM
Protective Sleeve Attached:N
SAE Approved:SAE J20R4 Class D-1, SAE J1684 Type EC

REVIEW SNAPSHOT®

by PowerReviews
CARQUEST by DaycoCurved Radiator Hose
 
3.2

(based on 5 reviews)

Ratings Distribution

  • 5 Stars

     

    (2)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (1)

  • 1 Stars

     

    (1)

80%

of respondents would recommend this to a friend.

Pros

  • Easy to install (4)

Cons

No Cons

Best Uses

  • Replacement (4)
    • Reviewer Profile:
    • Mechanic (3)

Reviewed by 5 customers

Displaying reviews 1-5

Back to top

(2 of 4 customers found this review helpful)

 
3.0

Recommended with Modification

By 

from Gray Court, SC

About Me Mechanic

Pros

  • Easy To Install

Cons

    Best Uses

    • Replacement

    Comments about CARQUEST by Dayco Curved Radiator Hose:

    Installed easily. One clamp at the Tee leaked in less than 50 miles of driving. Replace the crimped on clamps with screw-on or spring loaded clamps during installation.

    Comment on this reviewHelp Icon

    (3 of 5 customers found this review helpful)

     
    2.0

    Poor designed clamps at tee

    By 

    from Central Florida

    About Me Mechanic

    See all my reviews

    Ask me a question

    Helpful Reviewer

    Pros

    • Easy To Install
    • Perfect Fit

    Cons

    • Factory Clamps Leak

    Best Uses

    • Replacement

    Comments about CARQUEST by Dayco Curved Radiator Hose:

    Factory clamps should be removed and replaced with screw gear clamps; hose clamps you tighten with a screw driver or 8mm socket. Mark the hose and connection points for proper alignment before installing new clamps. I took the first hose back to Advance - leaker. I decided to go with hose clamps and removed the factory clamps. Remove the factory clamps with a screw driver - pry the last locking tab up and separate the clamp by prying between the metal strips. The clamp will release and can be removed. I replaced the 1 3/4"" and the 1 1/4 " factory clamps. You can try the hose but if it leaks you will need to drain the radiator again - not worth the $4.00 extra clamps cost. After putting the screw clamps on the car has been driven over 1,000 miles with no leaks.
    Good luck!! I do recommend this product if you change the clamps. Hope the hose provider reads feed back and makes corrections.

    Comment on this reviewHelp Icon

    (2 of 2 customers found this review helpful)

     
    5.0

    A1 PRODUCT

    Profile Image

    By 

    from NEW JERSEY

    About Me Mechanic

    See all my reviews

    Ask me a question

    Verified Buyer
    Helpful Reviewer

    Pros

    • A1
    • Durable
    • Easy To Install

    Cons

    • No Cons

    Best Uses

    • Everyday Driving
    • Replacement

    Comments about CARQUEST by Dayco Curved Radiator Hose:

    GOOD PRODUCT

    Comment on this reviewHelp Icon

    (1 of 1 customers found this review helpful)

     
    5.0

    Fit perfectly

    By 

    from Bellevue, WA

    About Me Casual Driver

    See all my reviews

    Verified Buyer
    3 or more reviews submitted

    Pros

    • Easy To Install

    Cons

      Best Uses

      • Everyday Driving
      • Replacement

      Comments about CARQUEST by Dayco Curved Radiator Hose:

      This hose fit perfectly and was very easy to install.

      Comment on this reviewHelp Icon

      (3 of 3 customers found this review helpful)

       
      1.0

      This hose is a leaker

      By 

      from Boca Raton, FL

      Verified Reviewer

      Comments about CARQUEST by Dayco Curved Radiator Hose:

      Bought this hose 2 months ago. Have had small leaks ever since. The metal hose clamps at the T are pressed on and not adustable (ie. you can't tighten them) had to take thm off and put regular screw type clamps on. Do your self a favor and buy a hose with molded plastic fittings or take off the clamps and put real ones on.

      Comment on this reviewHelp Icon

      Displaying reviews 1-5

      Back to top

      Check out the specials in our monthly flyer.
       
       
      Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.