Belt Tensioner
Hover over the image to zoom in
Share this:

CARQUEST by Dayco Belt Tensioner

Part No. 89215 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

Dayco No Slack Automatic Belt Tensioners are specifically built to outperform and outlast competitive OE parts. The heavy duty cast aluminum spring case resists cracking and fatigue. Each component is built to resist rust, endure the toughest of conditions while promoting quieter performance and longer life.

Product Features:
  • Manufactured with a specially coated patented flat wire spring to allow the internal tension to be concentric, thus providing a more even degree of constant tension
  • The patented Deflected Arm Plate dampens arm movement, prolonging the life of the tensioner by limiting the amount of rotational movement
  • Contains a metallic locator pin built to withstand extreme drive demands and properly locate the tensioner for installation
  • Dayco's patented Nylon Pivot Bushing keeps internal components in constant contact to maintain proper tensioner alignment
Back To Top
Belt Type:Serpentine
Mounting Type:Automatic
Pulley Diameter:76 in
Pulley Material:Polymer
Pulley Type:Grooved
Pulley Width:32.6 in

REVIEW SNAPSHOT®

by PowerReviews
CARQUEST by DaycoBelt Tensioner
 
4.4

(based on 33 reviews)

Ratings Distribution

  • 5 Stars

     

    (19)

  • 4 Stars

     

    (9)

  • 3 Stars

     

    (3)

  • 2 Stars

     

    (2)

  • 1 Stars

     

    (0)

90%

of respondents would recommend this to a friend.

Pros

  • Easy to install (24)
  • Durable (8)
  • Improves engine efficiency (4)
  • Lightweight (4)

Cons

  • No improvement in performance (4)

Best Uses

  • Everyday driving (16)
  • Replacement (15)
    • Car & Truck:
    • Casual driver (3), Truck enthusiast (3)
    • Was this a gift?:
    • No (3)
    • Reviewer Profile:
    • Casual driver (8), Truck enthusiast (8), Auto enthusiast (6), Mechanic (5)

Most Liked Positive Review

 

Perfect

Snap to replace and the sealed bearings is a plus for me. New part did not have a mounting nut with it, but the old one worked just fine. New problem is that...Read complete review

Snap to replace and the sealed bearings is a plus for me. New part did not have a mounting nut with it, but the old one worked just fine. New problem is that I need to replace the other pulleys to match the "quietness" of this one :-)

VS

Most Liked Negative Review

 

seems ok

product was in stock in and out in no time. got home and the assembly was keeping the coil pack from seating properly. had to space the coil pack for assembly to fit...Read complete review

product was in stock in and out in no time. got home and the assembly was keeping the coil pack from seating properly. had to space the coil pack for assembly to fit properly. when i put the oil dipstick back in i accidently hit the pully with the bolt bracket on the stick. left a straight scratch line on the pully across the teeth. not very durable at all. product fits everything except its just a touch over sized so plan on spacing your coil pack for this to fit. it was installed on a 5.9 L dodge durango.

Reviewed by 33 customers

Displaying reviews 1-10

Back to top

Previous | Next »

 
5.0

Great product, easy install

By 

from Hampton Roads, VA

Verified Buyer

Comments about CARQUEST by Dayco Belt Tensioner:

Directions were easy and straight forward.10 minute install

  • Was this a gift?:
  • No
 
5.0

What can i say it's tensioner

By 

from Boise, id

Verified Buyer

Comments about CARQUEST by Dayco Belt Tensioner:

Worked as advertised for almost half the price with first time order discount.

  • Was this a gift?:
  • No
 
5.0

Great part fir my 1999 Dodge Rxm

By 

from Elizabeth,NJ

Verified Buyer

Comments about CARQUEST by Dayco Belt Tensioner:

Great part. 1999 Dodge RAM 1500

  • Was this a gift?:
  • No
 
5.0

Perfect!

By 

from Bremen, ME

About Me Casual Driver

Verified Buyer

Pros

  • Easy To Install

Cons

  • None

Best Uses

  • Everyday Driving

Comments about CARQUEST by Dayco Belt Tensioner:

My tensioner pulley in my 98 Dodge Dakota started making noise on the way to work one morning. When I was ready to leave, I went to Advanceautoparts.com, and ordered one online before I left work. I arrived at my local Advance Auto parts store about 15 minutes later, and they had it there waiting for me! I had a pretty good handle on what I was doing, but I still watched the tutorial video on the website. I had the old one off in just a few minutes, and the new one on even quicker! Worked like a charm and I was back on the road in less than a half an hour!

 
5.0

Advance auto my is toys r us

By 

from Brooklyn ny

See all my reviews

Verified Buyer
3 or more reviews submitted

Comments about CARQUEST by Dayco Belt Tensioner:

Was easy to afford especially with the discount the provide online. Witch makes it easier and less stressful than having go and wait on a line. They have it ready for u when u walk thru the door . The parts are oem n have a decent warranty behind it. And was pretty simple to install no hassle, good for everyday driving, very durable. Definitely recommend to friends and family, go online and use there 20 percent discount at a decent price for a quality part. No cons here very durable n reliable

 
5.0

Quick fix to a saggy belt

By 

from Orlando, FL

About Me Casual Driver, Truck Enthusiast

Verified Buyer

Pros

  • Easy To Install

Cons

    Best Uses

    • Everyday Driving

    Comments about CARQUEST by Dayco Belt Tensioner:

    Needed to replace the belt tensioner on my pickup truck. This part was in stock at the local store and installed in about 10 minutes using a standard socket set I carry in the truck. Cant get any easier than that

     
    4.0

    A ok

    By 

    from Georgetown de

    Verified Buyer

    Pros

      Cons

      • Had none

      Best Uses

        Comments about CARQUEST by Dayco Belt Tensioner:

        Did what it had to do

         
        5.0

        Belt tensioner 5.2L Mopar

        By 

        from Daleville, Va

        About Me Auto Enthusiast

        Verified Buyer

        Pros

        • Easy To Install

        Cons

          Best Uses

          • Replacement

          Comments about CARQUEST by Dayco Belt Tensioner:

          Installed easy, always recommend when replacing the serpentine belt.

           
          4.0

          Good product

          By 

          from Rolesville,NC

          About Me Auto Enthusiast, Casual Driver

          See all my reviews

          Verified Buyer

          Pros

          • Durable
          • Easy To Install
          • Improves Engine Efficiency
          • Lightweight

          Cons

            Best Uses

            • Everyday Driving
            • Replacement

            Comments about CARQUEST by Dayco Belt Tensioner:

            Is product was do easy to install, so far so good.

             
            5.0

            works well

            By 

            from Pennsylvania

            About Me Truck Enthusiast

            Verified Buyer

            Pros

            • Durable
            • Easy To Install

            Cons

              Best Uses

              • Replacement

              Comments about CARQUEST by Dayco Belt Tensioner:

              This Dayco belt tensioner was a very good replacement for on my 1997 Dodge Ram with the 5.9 liter V8. At first I thought it wasn't the right part because the size is slightly larger than the OE tensioner. Should have known not to doubt the Advance Auto crew. I had the old tensioner off and the new one on in a matter of 25 minutes. Taking the ignition box off (to the left of the mounting bracket)is a must. It fits correctly and I did not have any issue with alignment of the pulley in relation to the other pulleys on the truck. I like the fact that the spring is flat metal instead of round stock.

              Displaying reviews 1-10

              Back to top

              Previous | Next »

              Do you have questions about this product?

               

              Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

              3 Questions | 6 Answers
              Displaying questions 1-3
              • Q:

                I have a 1996 Dodge Ram Van 2500 with the 3.9l
                Is this the right tensioner for this large size van?
                Asked on 10/26/2015 by Charles from Golden, CO

                1 answer

                • CUSTOMER CARE

                  A:

                  Hi Charles, I'm glad to assist you. This CARQUEST by Dayco Belt Tensioner (Part No. 89215) should work fine on your 1996 Dodge Ram Van 2500 3.9lL.

                  Answered on 10/27/2015 by Solomon
              • Q:

                I currently have a belt tensioner that is sticking and dosen't seem to have any spring to it. When I changed the Idler Pulley and releaved the tension it just sat there and did not go back to the original location. My current tensioner is not sealed is this typical?
                Asked on 4/24/2011 by Dave from Bloomsburg, PA

                2 answers

                • CUSTOMER CARE

                  A:

                  With out the presence of your vehicle we would not be able to properly diagnose it nor provide you with a 100% answer. We would suggest taking your vehicle to a certified mechanic for a proper diagnosis before buying and having parts installed that may not solve or be the problem.

                  Answered on 4/27/2011 by David the Dynamite Parts Guy from AAP
                • A:

                  It is shot, take it off and recycle it, if it sticky, it no worky! Yes, it is sealed or supposed to be, replace your belt while you are there because running with lower tension could cause slippage and burnishing which will shorten belt life drastically.

                  Answered on 12/28/2012 by Dodge Boy from Cincinnati, Ohio
              • Q:

                i have this loud continuous squeek in the front of the motor . thought it was a pulley replaced powersteering pump (pulley) water pump was bad so replaced tha pulley . replaced the idler and tensioner pulley. new alternator so that pulley is new.. the actual tensioner is all that is left to replace .. could this solve my squeeky issue??
                Asked on 5/23/2010 by big k from smyrna

                3 answers

                • CUSTOMER CARE

                  A:

                  Replacing this pulley may help, but the squeeking may be coming from the belt itself.

                  Answered on 5/24/2010 by Mike from AAP
                • A:

                  it could be the pulley or just the belt. Dodge 3.9L belt tensioners are know to go bad after 110k mark.

                  Answered on 6/22/2010 by strohl from pa
                • A:

                  Stop wasting your money, remove the belt and spin each pulley to isolate the squeak, sounds will resonate inside of an engine compartment masking the source. if you want to cheat before you pull the belt, buy a can of silicone spray, install the long red nozzle on the can, and delicately spray each component with the engine running, when the noise goes away after the spray you have found your source. *******keep your hands away from moving parts and do not be too liberal around the belt as it will carry the silicone spray and coat the other components. if it still did not help, check the alternator first as it has sealed bearings in the back of it that silicone spray will not affect.

                  Answered on 12/28/2012 by Dodge Boy from Cincinnati, Ohio
              Displaying questions 1-3

              Do you have a question about this product? 

              Check out the specials in our monthly flyer.
               
               
              Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.