Exhaust Gas Recirculation Pressure Feedback Sensor
Hover over the image to zoom in
Exhaust Gas Recirculation Pressure Feedback Sensor
Share this:

CARQUEST by BWD Exhaust Gas Recirculation Pressure Feedback Sensor

Part No. EGR155 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

CARQUEST by BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Manufactured in TS 14001 and ISO/TS 16949 Certified Facility (OE certifications)
  • Utilizes custom Becomes Integrated Circuit technology, thin film laser trimming for precise output voltage, and 2 sided ceramic circuit  technology for compact construction
  • Component level EMI protection to guard against external signal interference.
  • Acid/Gas resistant sensing element to stand up to corrosive exhaust gases. Calibrated at temperature extremes to match Engine compartment conditions.
Back To Top
Connector Gender:Female

REVIEW SNAPSHOT®

by PowerReviews
CARQUEST by BWDExhaust Gas Recirculation Pressure Feedback Sensor
 
4.5

(based on 30 reviews)

Ratings Distribution

  • 5 Stars

     

    (19)

  • 4 Stars

     

    (9)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (1)

93%

of respondents would recommend this to a friend.

Pros

  • Easy to use (20)
  • Lightweight (10)
  • Durable (6)
  • High-performance (4)

Cons

No Cons

Best Uses

  • Trucks (14)
  • Large cars (4)
  • Small cars (3)
    • Car & Truck:
    • Auto enthusiast (5), Casual driver (3), Mechanic (3)
    • Reviewer Profile:
    • Casual driver (10), Auto enthusiast (4)
    • Was this a gift?:
    • No (24)

Most Liked Positive Review

 

Common problem for Fords, easy fix!!!!

If you are getting a p401 code- egr insufficient flow- then this is probably the culprit. The factory sensor is made of aluminum and corodes badly. I have changed one on my 98...Read complete review

If you are getting a p401 code- egr insufficient flow- then this is probably the culprit. The factory sensor is made of aluminum and corodes badly. I have changed one on my 98 taurus and my 98 e350 van. Both were an easy fix and problem solved.

VS

Most Liked Negative Review

 

Do not use on V8 SHO

The SHO V8 gives off too much heat where sensor mounts. The plastic sensor melted and vode returned, I have to get aluminium sensor from Ford for my application.

The SHO V8 gives off too much heat where sensor mounts. The plastic sensor melted and vode returned, I have to get aluminium sensor from Ford for my application.

Reviewed by 30 customers

Displaying reviews 1-10

Back to top

Previous | Next »

 
1.0

use A Ford oem part for this

By 

from ft mccoy fl

Comments about CARQUEST by BWD Exhaust Gas Recirculation Pressure Feedback Sensor:

I bought this part to try and fix a lean code I was getting which wound up being a vacuum leak in the intake manifold. But my truck had developed a pinging problem I thought was related to the vacuum leak. After fixing the vacuum leak it still was pinging I was putting hi test gas to slow down the spark knock. After some research a low egr flow will cause the truck to ping. So I put the old ford motor craft sensor back on and the pinging stopped. It walks like a duck and quacks like a duck but it aint a duck use an OEM part for this

  • Was this a gift?:
  • No

Comment on this reviewHelp Icon(earn points)

 
5.0

Good product!

By 

from Milwaukee Wi.

Verified Buyer

Comments about CARQUEST by BWD Exhaust Gas Recirculation Pressure Feedback Sensor:

For some reason my escape blow this sensor out and check engine came on. So I went online and order this sensor and the hoses for it. The sensor was the exact same fit and look as the original. The instalación was a peace a cake.

  • Was this a gift?:
  • No

Comment on this reviewHelp Icon(earn points)

 
5.0

Fixed the problem

By 

from Mobile al

Verified Buyer

Comments about CARQUEST by BWD Exhaust Gas Recirculation Pressure Feedback Sensor:

Easy install

  • Was this a gift?:
  • No

Comment on this reviewHelp Icon(earn points)

 
5.0

Solid After Market Part

By 

from Chicago,IL.

About Me Casual Driver

Verified Buyer

Pros

  • Easy To Use
  • Exact Match
  • High-Performance

Cons

    Best Uses

    • Large Cars
    • Small Cars
    • Trucks

    Comments about CARQUEST by BWD Exhaust Gas Recirculation Pressure Feedback Sensor:

    I knew going in that the sensor was the problem. This replacement job is about a 5min. repair. Just be careful of the small 8mm. nuts hold the part in place, these can get stripped easy.

    • Was this a gift?:
    • No

    Comment on this reviewHelp Icon(earn points)

    (2 of 6 customers found this review helpful)

     
    4.0

    Check this before replacing EGR valve

    By 

    from Washington, DC

    About Me Mechanic

    Verified Buyer
    Level 1

    Pros

    • Easy to install

    Cons

      Best Uses

        Comments about CARQUEST by BWD Exhaust Gas Recirculation Pressure Feedback Sensor:

        If your vehicle is running rough and throwing a code for the EGR valve you may want to try this part before replacing the EGR valve.

        This installs in minutes and from what I've read this EGR position sensor fails more frequently than the actual EGR valve. Installation on my Mazda Tribute consisted of plugging in one electrical connector and slipping on two vacuum lines. All told it was less than 5 minute job from opening the hood to completing the replacement.

        • Was this a gift?:
        • No

        Comment on this reviewHelp Icon(earn points)

        (2 of 6 customers found this review helpful)

         
        5.0

        Good New Aftermarket Part

        By 

        from Fitzgerald, GA

        About Me Casual Driver

        Ask me a question

        Level 5

        Pros

        • Durable
        • Easy To Use
        • Lightweight
        • Versatile

        Cons

          Best Uses

          • Trucks

          Comments about CARQUEST by BWD Exhaust Gas Recirculation Pressure Feedback Sensor:

          I went and got this part after seeing a P0401 Code on my truck PCM-EGR Insufficient Flow Detected. I hope to get better gas mileage on the road. I took my old one to the store to compare it to the new aftermarket one, the one I took off was factory and there was corrosion on the one by the way, I can say it was time to be replaced. The old one sure was making my truck not ride smoothly.This plastic design is slightly different than the oem metal sensor it replaced. I correctly hooked the hoses back the way that they suppose to go, I did not hook'em wrong. My truck sure was hesitating, stumbling, poor low speed acceleration 1st thru 3rd gear when I was on the road. It was easy and simple to change it out on the truck, I pray that the hesitation is gone when i get on the road. The code is not present anymore on my diagnostic device. Im glad I ordered online and saved good, 35% off one time code use per household. Thank You AAP for good discount codes. You the best.The factory sensor is made of aluminum and corodes badly

          • Was this a gift?:
          • No

          Comment on this reviewHelp Icon(earn points)

          (5 of 11 customers found this review helpful)

           
          5.0

          Better than the original!

          By 

          from Norcross, GA

          About Me Casual Driver

          Verified Buyer
          Helpful Reviewer

          Pros

          • Exact fit

          Cons

          • None

          Best Uses

            Comments about CARQUEST by BWD Exhaust Gas Recirculation Pressure Feedback Sensor:

            I got a check engine code P-401 for the egr system but after doing some research I found it was this part that was bad. The best thing is that I got better fuel mileage after replacing it.

            • Was this a gift?:
            • No

            Comment on this reviewHelp Icon(earn points)

            (17 of 29 customers found this review helpful)

             
            4.0

            Take your old one to the store

            Pros

            • Easy To Use

            Cons

              Best Uses

                Comments about CARQUEST by BWD Exhaust Gas Recirculation Pressure Feedback Sensor:

                On my 2000 Sable, this fixed the P1401 code. According to internet commentors, these fail all the time, so the P1401 code means just replace this sensor. I checked with a local Ford/Mazda tech friend and he agreed.
                This plastic design is slightly different than the oem metal sensor it replaced. The difference meant that the vacuum lines wouldn't quite reach, so I suggest that when replacing the dpfe, you take the old sensor to the store with you along with the rubber vacuum lines, and buy new lines that are a couple inches longer. By taking the old ones in, you will be more likely to get the proper diameter vacuum lines. On mine there was a clear difference in line diameters on the hose and the sensor tubes, so it was easy to get them right. If in doubt, note which line goes to which tube. You may want to mark one of the metal lines with tape or a marker. On mine, the fat tube is labeled "HI" and the skinny one is labeled "REF" and was labeled on both the old and new sensors. This is a fairly easy DIY job, though I did break the lock tab on the electrical connector, but simply secured it with a zip tie.

                Comment on this reviewHelp Icon(earn points)

                (15 of 30 customers found this review helpful)

                 
                5.0

                Cured my P1401 Engine Code

                Profile Image

                By 

                from Beavercreek, Ohio

                About Me Auto Enthusiast, Casual Driver

                Level 3

                Pros

                • Easier Than Oe To Install
                • Easy To Use
                • Lightweight

                Cons

                  Best Uses

                    Comments about CARQUEST by BWD Exhaust Gas Recirculation Pressure Feedback Sensor:

                    When I bought the car (1999 Ford SVT 2.5L) my engine threw out a P1401 Engine Code - DPFE Sensor. After replacing plugs and wires making the car more responsive, the code persisted, and a tiny hesitation was still noticeable during low-speed acceleration in 1st thru 3rd gear.

                    I installed this new sensor with the help of only a 5/16" socket on an extension. The code disappeared and the hesitation was completely gone.

                    There are 2 vacuum hoses attached to the sensor. Make sure the correct hoses are attached to the correct barbs on the sensor. The larger hose goes on the "HI" barb marked on the sensor.

                    Good product! -m.

                    • Was this a gift?:
                    • No

                    Comment on this reviewHelp Icon(earn points)

                    (11 of 23 customers found this review helpful)

                     
                    4.0

                    This product should come with a diegram

                    By 

                    from York PA

                    About Me Casual Driver

                    Verified Buyer
                    Level 2

                    Pros

                    • Durable
                    • Lightweight

                    Cons

                    • Difficult To Use

                    Best Uses

                    • Small Cars

                    Comments about CARQUEST by BWD Exhaust Gas Recirculation Pressure Feedback Sensor:

                    This product shoud come with a diegram so you can see where the larger hose goes to.

                    • Was this a gift?:
                    • No

                    Comment on this reviewHelp Icon(earn points)

                    Displaying reviews 1-10

                    Back to top

                    Previous | Next »

                    Do you have questions about this product?(earn points for answers!)

                     

                    Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

                    29 Questions | 36 Answers
                    Displaying questions 1-10Previous | Next »
                    • Q:

                      I would like the pin out and how to determine which pin goes to sensor common, sensor power, and sensor signal? I there a drawing of the device indicating this?
                      Asked on 11/23/2014 by DLWit

                      1 answer

                      • CUSTOMER CARE

                        A:

                        Hi DLWit, I could be of some help! I have forwarded some generic information to your email address for a 2000 Crown Vic. There may be some variations based on the exact vehicle.

                        Answered on 11/25/2014 by Solomon
                    • Q:

                      my 1996 ford f150 5.0 eddie bauer uses a aluminum dpfe will this work instead?
                      Asked on 4/14/2014 by mike from san antonio tx

                      1 answer

                      • CUSTOMER CARE

                        A:

                        Hi mike, I'm happy to help you! This black plastic OE alternative DPFE will work well with your vehicle.

                        Answered on 4/14/2014 by Steve from AAP
                    • Q:

                      This part, for removal and installation on 01' Ford Explorer 5.0, if you notice, has two holes in it; without question, they are for bolts that secure it to the motor. What size are these bolts? Or, what size socket or wrench do I need?
                      Asked on 3/28/2013 by Russ from Indiana

                      2 answers

                      • CUSTOMER CARE

                        A:

                        For any further assistance regarding the BWD EGR Position Sensor - Part No. EGR155 please call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

                        Answered on 3/29/2013 by John the Car-Doc from AAP
                      • A:

                        10 mm

                        Answered on 1/15/2015 by mark from brandon
                    • Q:

                      Why would I need and 1nch and a half wrench to unbolt the sensor? I was asking about the sensor, not EGR set up.
                      Asked on 3/25/2013 by russ from Indiana

                      1 answer

                      • CUSTOMER CARE

                        A:

                        Sorry for any confusion caused. The EGR sensor (BWD EGR Position Sensor - Part No. EGR155) has to be pulled with hands. If it is stuck on the tubes pretty tightly you need both hands to pull the sensor out of that rubber hose. Hold steady the 2 metal pipes (you don't want to break those pipes) and one twisting or pulling out the sensor. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

                        Answered on 3/28/2013 by John the Car-Doc from AAP
                    • Q:

                      What size socket or wrench do I need to remove this from 01 Explorer? Very difficult to get to being so tight against the firewall.
                      Asked on 3/23/2013 by Russ from Indiana

                      2 answers

                      • CUSTOMER CARE

                        A:

                        With respect to your inquiry on the BWD EGR Position Sensor - Part No. EGR155 you would need a 1-1/16" wrench to break loose the EGR tube bolts. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

                        Answered on 3/25/2013 by John the Car-Doc from AAP
                      • A:

                        one side of the sensor hooks on a bracket,other hole goes over a thread post and nut fastens it down 6mm socket.

                        Answered on 11/16/2013 by john from tampa,fl.
                    • Q:

                      Where is this sensor located also instructions say i may have to modify vacume lines ?
                      Asked on 12/26/2012 by lew

                      1 answer

                      • CUSTOMER CARE

                        A:

                        For further assistance regarding the BWD EGR Pressure Feedback Sensor (Part No. EGR155), please provide the year, make, model and engine size of your vehicle. For more information, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.

                        Answered on 12/26/2012 by Steve from AAP
                    • Q:

                      what causes them to melt
                      Asked on 8/14/2012 by larry from flint mi.

                      1 answer

                      • CUSTOMER CARE

                        A:

                        If the raw unburned gas is passing through the exhaust system including your catalytic converter and coming out of the tail pipe. It makes the EGR Pressure Feedback Sensor to melt. So raw gas is leaving from your cylinders. We would suggest taking your vehicle to a certified mechanic for a proper diagnosis before buying and having parts installed that may not (solve/be) the problem. For further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.

                        Answered on 8/15/2012 by Rick from AAP
                    • Q:

                      I purchased this sensor and it was the wrong part that I needed.
                      I actually need the EGR vacuum solenoid that is giving me trouble.
                      Question is if I can return original part bought and in return purchase the part I need without any hassels.
                      Employee stated that I could not return part once I bought it.
                      I appreciate an answer from you.
                      Thank you.............
                      Asked on 4/15/2012 by Erasmo Menodza from Corpus Christi, Tx

                      1 answer

                      • CUSTOMER CARE

                        A:

                        Please feel free to call 1-877-238-2623 and one of our representatives will gladly assist you with any questions or concerns you may have.

                        Answered on 4/17/2012 by Steve from AAP
                    • Q:

                      i have a ford f 150 and i have replaced fuel filter, change plugs and it still dont want to crank up its like its not getting gas
                      Asked on 1/25/2012 by sherry from sc

                      1 answer

                      • CUSTOMER CARE

                        A:

                        I would suggest taking your vehicle to a certified mechanic for a proper diagnosis before buying and having parts installed that may not (solve/be) the problem.

                        Answered on 1/25/2012 by DIY Daniel from AAP
                    • Q:

                      Where is the EGR valve pressure sensor located on a 1996 sport ford explore 4 cylinder?
                      Asked on 11/27/2011 by Bosslady from Gary,Indiana

                      1 answer

                      • CUSTOMER CARE

                        A:

                        It is located on the on the back of the engine, near the wiper cowl, mounted to the back of the upper intake manifold.

                        Answered on 11/28/2011 by Dennis from AAP
                    Displaying questions 1-10Previous | Next »

                    Do you have a question about this product? 

                    Create or view your online garage

                    Check out the specials in our monthly flyer.

                     
                     
                    Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.