Manifold Absolute Pressure Sensor
Hover over the image to zoom in
Manifold Absolute Pressure Sensor Manifold Absolute Pressure Sensor
Share this:

BWD Manifold Absolute Pressure Sensor

Part No. EC1636P Warranty  

See if this part fits a specific vehicle.

Check Vehicle Fit

BWD's manufacturing process includes the extensive use of robotics for precision assembly. 100% product in-line and end-of-line inspection from raw materials to the packaging of the finished product.
Back To Top
Connector Gender:Female
Terminal Gender:Male

REVIEW SNAPSHOT®

by PowerReviews
BWDManifold Absolute Pressure Sensor
 
4.5

(based on 11 reviews)

Ratings Distribution

  • 5 Stars

     

    (8)

  • 4 Stars

     

    (2)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (1)

91%

of respondents would recommend this to a friend.

Pros

  • Easy to use (7)

Cons

    Best Uses

    • Large cars (3)
      • Reviewer Profile:
      • Mechanic (5), Casual driver (4)
      • Was this a gift?:
      • No (10)

    Most Liked Positive Review

     

    Fixed the immediate 'stall after start'

    Car is a 2000 Pontiac Bonneville 3.8L V6. Had a check engine code after changing intake manifold and immediate stall. Also very rough running and barely able to idle. This part fixed it,...Read complete review

    Car is a 2000 Pontiac Bonneville 3.8L V6. Had a check engine code after changing intake manifold and immediate stall. Also very rough running and barely able to idle. This part fixed it, and the old one was broken in half.

    VS

    Most Liked Negative Review

     

    faulty sensor

    sensor started to malfunction shortly after installation . code PO 108

    sensor started to malfunction shortly after installation . code PO 108

    Reviewed by 11 customers

    Sort by

    Displaying reviews 1-10

    Back to top

    Previous | Next »

    (1 of 1 customers found this review helpful)

     
    5.0

    easy and effective

    By Chris

    from Lancaster, NY

    About Me Casual Driver

    Verified Buyer
    Level 1

    Pros

    • Easy To Use
    • Lightweight

    Cons

      Best Uses

        Comments about BWD Manifold Absolute Pressure Sensor:

        My service engine soon light was on and this is the part I needed. The light is off now and the car seems to run much better. It was extremely easy to find where to put it and extremely easy to put it in.

        • Was this a gift?:
        • No

        Comment on this review(earn points)

        (1 of 1 customers found this review helpful)

         
        5.0

        Worked perfect

        By Sevdog

        from Jackson Michigan

        About Me Mechanic

        Ask me a question

        Verified Buyer
        Level 3

        Pros

        • Check Engine Light Gone
        • Easy To Use

        Cons

        • None

        Best Uses

        • Large Cars
        • Small Cars
        • Trucks

        Comments about BWD Manifold Absolute Pressure Sensor:

        Worked perfect

        • Was this a gift?:
        • No

        Comment on this review(earn points)

        (1 of 1 customers found this review helpful)

         
        5.0

        Fixed the immediate 'stall after start'

        By Luke

        from NY

        About Me Auto Enthusiast, Casual Driver, Mechanic

        Verified Buyer
        Level 4

        Pros

        • Easy To Use

        Cons

          Best Uses

            Comments about BWD Manifold Absolute Pressure Sensor:

            Car is a 2000 Pontiac Bonneville 3.8L V6. Had a check engine code after changing intake manifold and immediate stall. Also very rough running and barely able to idle. This part fixed it, and the old one was broken in half.

            • Was this a gift?:
            • No

            Comment on this review(earn points)

             
            5.0

            great product, would buy again

            By Trick

            from PA

            About Me Auto Enthusiast, Weekend mechanic

            Verified Buyer
            Level 1

            Pros

            • Easy installation
            • Easy To Use

            Cons

            • None

            Best Uses

              Comments about BWD Manifold Absolute Pressure Sensor:

              Easy product to install, less than a five minute job. So far, it seems to be working great.

              • Was this a gift?:
              • No

              Comment on this review(earn points)

               
              5.0

              MAP Sensor - done!

              By Joe Schmoe

              from Nashua, NH

              About Me Competitive Driver, Mechanic, Truck Enthusiast

              Verified Buyer
              3 or more reviews submitted

              Pros

              • Easy To Use

              Cons

                Best Uses

                • Trucks

                Comments about BWD Manifold Absolute Pressure Sensor:

                Easy to install

                • Was this a gift?:
                • No

                Comment on this review(earn points)

                 
                4.0

                Good quality

                By mastertech1

                from st. louis, mo

                About Me Mechanic

                Verified Buyer
                Level 1

                Pros

                • Easy To Use

                Cons

                  Best Uses

                  • Large Cars
                  • Small Cars

                  Comments about BWD Manifold Absolute Pressure Sensor:

                  I needed this part to finish a repair on my 1996 bonneville. The part fit well and the senor readings were in a nornal specification range. Good buy for the money.

                  • Was this a gift?:
                  • No

                  Comment on this review(earn points)

                   
                  5.0

                  No Brain Sensor Science

                  By Stoney

                  from Hopkinsville, KY

                  About Me Casual Driver, Shade tree mechanic

                  Verified Buyer
                  3 or more reviews submitted

                  Pros

                  • Durable
                  • Easy to install

                  Cons

                  • None

                  Best Uses

                  • As advertised

                  Comments about BWD Manifold Absolute Pressure Sensor:

                  Works as advertised

                  • Was this a gift?:
                  • No

                  Comment on this review(earn points)

                   
                  5.0

                  the part worked very well,thank you

                  By jim

                  from nashville,tn

                  About Me Casual Driver, Mechanic

                  Verified Buyer
                  Level 1

                  Pros

                  • Easy To Use

                  Cons

                    Best Uses

                    • Large Cars

                    Comments about BWD Manifold Absolute Pressure Sensor:

                    i had purchased a starter and a map sensor from you and they both have performed very well

                    • Was this a gift?:
                    • No

                    Comment on this review(earn points)

                    (1 of 2 customers found this review helpful)

                     
                    4.0

                    Advance always has the parts you need

                    Comments about BWD Manifold Absolute Pressure Sensor:

                    Do not understand why these small parts are so expensive.

                    Comment on this review(earn points)

                    (1 of 2 customers found this review helpful)

                     
                    1.0

                    faulty sensor

                    By stu

                    from centreville

                    Pros

                      Cons

                        Best Uses

                          Comments about BWD Manifold Absolute Pressure Sensor:

                          sensor started to malfunction shortly after installation . code PO 108

                          • Was this a gift?:
                          • No

                          Comment on this review(earn points)

                          Displaying reviews 1-10

                          Back to top

                          Previous | Next »

                          Do you have questions about this product?(earn points for answers!)

                           

                          Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.

                          24 Questions | 27 Answers
                          Displaying questions 1-10Previous | Next »
                          • Q:

                            will a faulty MAP sensor cause a 98 Blazer from starting? The engine cranks but won't start. I have changed the entire3 plug system from the plugs to the distributor and all the sensors to it. But the engine still won't start. If the MAP is worn or bad would this cause the trouble?
                            Asked on 6/11/2013 by rustyspoon from Glendale Ky

                            1 answer

                            • CUSTOMER CARE

                              A:

                              With reference to your inquiry on the BWD Manifold Absolute Pressure Sensor - part# EC1636, the MAP sensor may be the possible cause of the problem on your truck. However, without the presence of the vehicle we could neither diagnose the problem nor provide you with a 100% answer. I would suggest taking your vehicle to a certified mechanic for a proper diagnosis before buying and having parts installed that may not (solve/be) the problem. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

                              Answered on 6/12/2013 by Vincent from AAP
                          • Q:

                            where is it located on the motor?
                            Asked on 12/9/2012 by NateDogg

                            1 answer

                            • CUSTOMER CARE

                              A:

                              This BWD MAP Sensor - part# EC1636 is vehicle specific. For assisting you further on locating the MAP sensor, please provide the year, make, model and engine size of the vehicle. You may also visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.

                              Answered on 12/10/2012 by Vincent from AAP
                          • Q:

                            I have a 2000 GMC K2500 4x4 and when i try to start it i get no start. if i hold the throttle peddle down a little it starts and sometimes shutts right down or has a ruff idle. when driving if i stop it shutts down. I replaced the IDLE AIR SENSOR and it is still doing it.
                            Asked on 11/2/2012 by Truckguy from Duncansville,PA

                            1 answer

                            • CUSTOMER CARE

                              A:

                              Sorry, without the presence of your vehicle we would not be able to properly diagnose it nor provide you with a 100% answer. We would suggest that you take your vehicle to a certified mechanic for further diagnosis. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto store and one of our representatives will gladly assist you with any questions or concerns you may have.

                              Answered on 11/3/2012 by Rick from AAP
                          • Q:

                            will the map sensor make your car shut off an not crank but wont to crank on a z34 monte carlo
                            Asked on 7/20/2012 by DEEZY from ST.LOUIS,MO

                            1 answer

                            • CUSTOMER CARE

                              A:

                              Symptoms of malfunctoning MAP (Manifold Absolute Pressure) sensor: The most obvious sign of a faulty MAP sensor is that the engine computer will send out a diagnostic code causing the "Check Engine" light to come on. However, sometimes an engine code will incorrectly indicate a faulty MAP sensor. This is commonly caused by a leak in a vacuum hose or port attached to the intake manifold. Prior to replacing a MAP sensor, inspect the vacuum lines and repair them as necessary. POOR ENGINE PERFORMANCE: If a MAP sensor is not sending the correct signals to the engine computer, an imbalance of pressure may result in rough engine performance. This will be most noticeable during acceleration or slowing down, as these are the times when there is the greatest difference between atmospheric pressure and the pressure within the manifold. A rough idle is a common manifestation of faulty MAP readings. INCREASED EMISSIONS: If the vehicle was found to release an excess of emissions and other causes have been ruled out, the cause may be a faulty MAP sensor. ENGINE SURGING: A faulty MAP sensor may result in poor synchronization between the air intake and the release of gasoline from the fuel injectors. Delayed acceleration followed by a sudden surge is a common sign of this type of problem. FOULED SPARK PLUGS: If the engine does not properly regulate the flow of air, the engine will regularly run LEAN or RICH. This refers to the engine performance in relation to whether the fuel is burning with too much or too little oxygen. While an engine running "LEAN" will experience depleted horsepower, an engine running "RICH" will be obvious from an inspection of the spark plugs. The spark plugs will become fouled, meaning that they are coated with residue resulting from inefficient combustion.
                              For compatibility of this part with your vehicle, please provide your vehicle make, model and engine specification.
                              For any further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and our representatives would be more than happy to assist you.

                              Answered on 7/20/2012 by Aaron from AAP
                          • Q:

                            If I change the map sensor amd reset the codes.Will the other two codes P1635 and P1639 be taking care of too?
                            Asked on 4/17/2012 by Anonymous

                            1 answer

                            • CUSTOMER CARE

                              A:

                              The codes P1635 and P1639 are saying the 5 volt reference is shorted to volatge somewhere. If you have access to a scan tool to view computer live data, plug it in and turn the vehicle on. It should be fuel level sensor,the map sensor,the egr pindle,throttle position and the fuel tank pressure showing high voltage. First scan the engine while running for what do these all read for volts. Secondly just turn the key on and turn the key off for one minute then turn the key on and look quickly to see if any show very high voltage for 2 seconds then drop down.

                              Answered on 4/19/2012 by Vincent from AAP
                          • Q:

                            on the 99 blazer 4.3 motor where is the map sensor located?
                            Asked on 3/13/2012 by red from fortwayne, In.

                            1 answer

                            • CUSTOMER CARE

                              A:

                              The MAP sensor should be located next to the air filter on your Chevy blazer.

                              Answered on 3/13/2012 by Steve from AAP
                          • Q:

                            I have a 1998 buick regal and the car shuts down when driving and slowing down at a stop light.It starts right back up.I changed the fuel pump,idle sensor,fuel filter,all fuses & relay that pertain to fuel.any answer for me to chase another part that could be the problem.?
                            Asked on 2/4/2012 by Bulldog from Orlando,fl

                            2 answers

                            • CUSTOMER CARE

                              A:

                              Unfortunately, without the presence of your vehicle we would not be able to properly diagnose it nor provide you with a 100% answer. We would suggest that you take your vehicle to a certified mechanic for further diagnosis.

                              Answered on 2/5/2012 by Steve from AAP
                            • A:

                              test the CKP sensor behind the Harmonic balancer, and the ICM where the coil packs sit on.

                              Answered on 3/16/2012 by jtizzle from mokena
                          • Q:

                            I have a 2000 blazer that idles rough. It started when I was going up a mountain I lost allmost all power but it came back. Idles rough now. I looked at the map sensor and the rubber bladder is deteriated. could that be my problem
                            Asked on 11/11/2011 by Anonymous

                            1 answer

                            • CUSTOMER CARE

                              A:

                              Yes, the MAP sensor should be the problem, However I would suggest taking your vehicle to a certified mechanic for a proper diagnosis before buying and having parts installed that may not (solve/be) the problem.

                              Answered on 11/12/2011 by Vincent from AAP
                          • Q:

                            will the map sensor cause multiple cylinder misfire condition
                            Asked on 11/10/2011 by Anonymous

                            2 answers

                            • CUSTOMER CARE

                              A:

                              Yes, a bad MAP sensor will cause a cylinder misfire but I would suggest you to buy a scanner and get scanned to see what trouble codes exactly your vehicle gives.

                              Answered on 11/10/2011 by Dennis from AAP
                            • A:

                              yes

                              Answered on 1/14/2012 by q from manchester
                          • Q:

                            i have a 2001 suburban 2500 some times it slows and says reduced engine power on the dash what could be the problem
                            Asked on 10/31/2011 by rick from miami,fl

                            1 answer

                            • CUSTOMER CARE

                              A:

                              The MAP sensor may be the problem. However, I would suggest taking your vehicle to a certified mechanic for a proper diagnosis before buying and having parts installed that may not (solve/be) the problem.

                              Answered on 10/31/2011 by Vincent from AAP
                          Displaying questions 1-10Previous | Next »

                          Do you have a question about this product? 

                          Create or view your online garage

                          Check out the specials in our monthly flyer

                           
                           
                          Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.