Fuel Pressure Regulator
Hover over the image to zoom in
Share this:

BWD Fuel Pressure Regulator

Part No. 23076 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

CARQUEST by BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Precision engineered pressure regulators for proper fuel delivery and engine performance
  • Our fuel pressure regulators are application specific for the perfect fit and form
  • A robust engineering design for greater resistance to leakage
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
Back To Top
Functions:Regulator

Do you have questions about this product?

 

Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

9 Questions | 9 Answers
Displaying questions 1-9
  • Q:

    Not a question, but rather a statement of fact: This is NOT a fuel pressure regulator, and should not be labeled, marketed, or sold as such. This part IS an Injection Pressure Regulator (IPR). It has absolutely nothing to do with fuel pressure. This part uses a variation in duty cycle, commanded by the PCM, to vary/control the volume (and hence the pressure) of the oil going from the HPOP (high pressure oil pump) to the oil rails in the head, and ultimately to the injectors. This high pressure oil is then used to actuate a piston in the injector, which then pushes out the fuel. The High Pressure Oil system operates at up to 3000+psi.
    The FUEL pressure regulator is a small diaphragm and relief spring type device, bolted to the left side of the fuel bowl, just above the inlet fuel line coming from the tank. The fuel system is at approx 50psi. As far as I can tell, Advance does NOT sell a FUEL pressure regulator for the 7.3L It is aftermarket performance vendors or Ford dealer only.
    Asked on 8/31/2015 by Annoyed at incompetence

    1 answer

    • CUSTOMER CARE

      A:

      Hi! Thank you for your feedback. Your observation will be forwarded to our Catalog Dept for consideration.

      Answered on 9/20/2015 by Solomon
  • Q:

    would this cause my 2000 F-250 7.3L turbo diesel to pump diesel into the oil and out the exaust and have no power?
    Asked on 2/5/2015 by Suzie from Moundsville, WV

    1 answer

    • CUSTOMER CARE

      A:

      I'm happy to help, Suzie! It's unlikely that replacing your fuel pressure regulator on your 2000 Ford F-250 Super Duty 7.3L Turbo Diesel will correct the problem of fuel mixing with your oil and blowing out of the exhaust. It is likely that there is a fuel system issue. These are typically fuel injector related. If your F-250 is a high mileage vehicle, it's certainly possible that the injectors have worn and need replaced.

      Before starting to purchase parts for your truck, I suggest performing some diagnostics to determine the cause of the diesel fuel mixing with your oil as well as the exhaust. A repair manual (Haynes Part No. 36060 or Chilton Part No. 26667) for your vehicle may provide some additional diagnostic procedures. If you are unable to determine the cause of the symptoms, I suggest working with a mechanic to determine the cause and remedy.

      Answered on 2/5/2015 by Heath, ASE Parts Specialist from AAP
  • Q:

    I purchased this IPR, 23076, and have installed it in my truck. This product appears to be defective as my normal running truck would hardly stay running with the new BWD product installed..It was shaking and misfiring violently. I had to put my original part back in to allow the truck to be driven. I do not have the original receipt, but with the store do a defective exchange without the receipt?
    Asked on 10/11/2014 by MNY

    1 answer

    • CUSTOMER CARE

      A:

      Hi MNY, I'm happy to help you in locating the receipt. Please reply back with your online order number or store transaction number so I can assist you further.

      Answered on 10/15/2014 by Solomon
  • Q:

    My 2002 F-250 7.3 Diesel starts and idles but has very little power when you put it in gear and drive could it be the pressure regulator and where is it located?
    Asked on 3/22/2014 by Tom the Bomb from Northern VA

    1 answer

    • CUSTOMER CARE

      A:

      Hi Tom, tricky question! The fuel pressure regulator should be the possible cause of the problem on your Ford F-250. The fuel pressure regulator should be underneath the fuel filter bowl on the righthand side of the motor. It has a two wire connector plug that goes into it. Also it is underneath the oil pressure sensor switch. Howevr, I would suggest taking your vehicle to a certified mechanic for a proper diagnosis before buying and having parts installed that may not (solve/be) the problem.

      Answered on 3/23/2014 by Vincent from AAP
  • Q:

    were is the fuel pressure regulator located on a 1996 f-250 7.3 power stroke
    Asked on 3/6/2014 by chuck

    1 answer

    • CUSTOMER CARE

      A:

      Hi Chuck! I have forwarded the location picture of this fuel pressure regulator to your email address.

      Answered on 3/7/2014 by Vincent from AAP
  • Q:

    were is the fuel pressure regulater located o 97 f-350 7.3 power stroke deisel
    Asked on 6/15/2013 by jeff

    1 answer

    • CUSTOMER CARE

      A:

      With reference to your inquiry on this BWD Fuel Pressure Regulator (Part No. 23076), it is located on the fuel rail. It is between the incoming fuel line and the fuel injectors on your 1997 Ford f-350. For further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.

      Answered on 6/15/2013 by Max from AAP
  • Q:

    Does this FPR come with the O-ring kit needed for install?
    Asked on 6/27/2011 by Anonymous

    1 answer

    • CUSTOMER CARE

      A:

      No, it does not include the O-ring kit with the fuel pressure regulator.

      Answered on 6/28/2011 by DIY Daniel from AAP
  • Q:

    Why does the part I got from your store only have the inside part? It's not the same as shown.It does NOT have the soleniod.
    Asked on 12/1/2010 by Not happy Neil from York Pa.

    1 answer

    • CUSTOMER CARE

      A:

      This part does not come with any kind of solenoid, there is only a electrical plug. If you received the part without the electrical fitting please take it back to your local Advance Auto Parts and have them exchange or return as defective. Hope this helps.

      Answered on 1/20/2011 by Brandon
  • Q:

    Will this clear the P00092 code that has been diagnosed?
    Asked on 9/7/2010 by Jim from Fairfield, Ca

    1 answer

    • CUSTOMER CARE

      A:

      What vehicle did you pull this code from?

      Answered on 9/9/2010 by Mike from AAP
Displaying questions 1-9

Do you have a question about this product? 

Check out the specials in our monthly flyer.
 
 
Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.