Exhaust Gas Recirculation Pressure Feedback Sensor
Hover over the image to zoom in
Exhaust Gas Recirculation Pressure Feedback Sensor
Share this:

BWD Exhaust Gas Recirculation Pressure Feedback Sensor

Part No. EGR155 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

CARQUEST by BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Manufactured in TS 14001 and ISO/TS 16949 Certified Facility (OE certifications)
  • Utilizes custom Becomes Integrated Circuit technology, thin film laser trimming for precise output voltage, and 2 sided ceramic circuit  technology for compact construction
  • Component level EMI protection to guard against external signal interference.
  • Acid/Gas resistant sensing element to stand up to corrosive exhaust gases. Calibrated at temperature extremes to match Engine compartment conditions.
Back To Top
Connector Gender:Female

REVIEW SNAPSHOT®

by PowerReviews
CARQUEST by BWDExhaust Gas Recirculation Pressure Feedback Sensor
 
4.5

(based on 33 reviews)

Ratings Distribution

  • 5 Stars

     

    (22)

  • 4 Stars

     

    (9)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (1)

93%

of respondents would recommend this to a friend.

Pros

  • Easy to use (20)
  • Lightweight (10)
  • Durable (6)
  • High-performance (4)

Cons

No Cons

Best Uses

  • Trucks (14)
  • Large cars (4)
  • Small cars (3)
    • Car & Truck:
    • Auto enthusiast (5), Casual driver (3), Mechanic (3)
    • Reviewer Profile:
    • Casual driver (10), Auto enthusiast (4)
    • Was this a gift?:
    • No (25)

Most Liked Positive Review

 

Common problem for Fords, easy fix!!!!

If you are getting a p401 code- egr insufficient flow- then this is probably the culprit. The factory sensor is made of aluminum and corodes badly. I have changed one on my 98...Read complete review

If you are getting a p401 code- egr insufficient flow- then this is probably the culprit. The factory sensor is made of aluminum and corodes badly. I have changed one on my 98 taurus and my 98 e350 van. Both were an easy fix and problem solved.

VS

Most Liked Negative Review

 

Do not use on V8 SHO

The SHO V8 gives off too much heat where sensor mounts. The plastic sensor melted and vode returned, I have to get aluminium sensor from Ford for my application.

The SHO V8 gives off too much heat where sensor mounts. The plastic sensor melted and vode returned, I have to get aluminium sensor from Ford for my application.

Reviewed by 33 customers

Displaying reviews 1-10

Back to top

Previous | Next »

 
5.0

DPFE SENSOR

By 

from orlando fl

See all my reviews

Verified Buyer

Comments about CARQUEST by BWD Exhaust Gas Recirculation Pressure Feedback Sensor:

Great product, fit and works just like to original part.

  • Was this a gift?:
  • No

Comment on this reviewHelp Icon

 
5.0

Exhaust was leaking into my cabin

By 

from Bridgeton, NJ

See all my reviews

Verified Buyer

Pros

  • Location On Top
  • Plug And Play
  • Two Bolts
  • Very Simple Fix

Cons

    Best Uses

      Comments about CARQUEST by BWD Exhaust Gas Recirculation Pressure Feedback Sensor:

      Very simple and quick fix!

      Comment on this reviewHelp Icon

       
      5.0

      worked perfect for 2000 explorer 5.0 v8

      By 

      from miami, fl

      See all my reviews

      3 or more reviews submitted

      Comments about CARQUEST by BWD Exhaust Gas Recirculation Pressure Feedback Sensor:

      In my case, 2000 ford 5.0 v8 you will need very little hands to replace the part.

      Comment on this reviewHelp Icon

       
      1.0

      use A Ford oem part for this

      By 

      from ft mccoy fl

      Comments about CARQUEST by BWD Exhaust Gas Recirculation Pressure Feedback Sensor:

      I bought this part to try and fix a lean code I was getting which wound up being a vacuum leak in the intake manifold. But my truck had developed a pinging problem I thought was related to the vacuum leak. After fixing the vacuum leak it still was pinging I was putting hi test gas to slow down the spark knock. After some research a low egr flow will cause the truck to ping. So I put the old ford motor craft sensor back on and the pinging stopped. It walks like a duck and quacks like a duck but it aint a duck use an OEM part for this

      • Was this a gift?:
      • No

      Comment on this reviewHelp Icon

       
      5.0

      Good product!

      By 

      from Milwaukee Wi.

      See all my reviews

      Verified Buyer

      Comments about CARQUEST by BWD Exhaust Gas Recirculation Pressure Feedback Sensor:

      For some reason my escape blow this sensor out and check engine came on. So I went online and order this sensor and the hoses for it. The sensor was the exact same fit and look as the original. The instalación was a peace a cake.

      • Was this a gift?:
      • No

      Comment on this reviewHelp Icon

       
      5.0

      Fixed the problem

      By 

      from Mobile al

      Verified Buyer

      Comments about CARQUEST by BWD Exhaust Gas Recirculation Pressure Feedback Sensor:

      Easy install

      • Was this a gift?:
      • No

      Comment on this reviewHelp Icon

       
      5.0

      Solid After Market Part

      By 

      from Chicago,IL.

      About Me Casual Driver

      Verified Buyer

      Pros

      • Easy To Use
      • Exact Match
      • High-Performance

      Cons

        Best Uses

        • Large Cars
        • Small Cars
        • Trucks

        Comments about CARQUEST by BWD Exhaust Gas Recirculation Pressure Feedback Sensor:

        I knew going in that the sensor was the problem. This replacement job is about a 5min. repair. Just be careful of the small 8mm. nuts hold the part in place, these can get stripped easy.

        • Was this a gift?:
        • No

        Comment on this reviewHelp Icon

        (2 of 6 customers found this review helpful)

         
        4.0

        Check this before replacing EGR valve

        By 

        from Washington, DC

        About Me Mechanic

        Verified Buyer

        Pros

        • Easy to install

        Cons

          Best Uses

            Comments about CARQUEST by BWD Exhaust Gas Recirculation Pressure Feedback Sensor:

            If your vehicle is running rough and throwing a code for the EGR valve you may want to try this part before replacing the EGR valve.

            This installs in minutes and from what I've read this EGR position sensor fails more frequently than the actual EGR valve. Installation on my Mazda Tribute consisted of plugging in one electrical connector and slipping on two vacuum lines. All told it was less than 5 minute job from opening the hood to completing the replacement.

            • Was this a gift?:
            • No

            Comment on this reviewHelp Icon

            (2 of 6 customers found this review helpful)

             
            5.0

            Good New Aftermarket Part

            By 

            from Fitzgerald, GA

            About Me Casual Driver

            See all my reviews

            Ask me a question

            3 or more reviews submitted

            Pros

            • Durable
            • Easy To Use
            • Lightweight
            • Versatile

            Cons

              Best Uses

              • Trucks

              Comments about CARQUEST by BWD Exhaust Gas Recirculation Pressure Feedback Sensor:

              I went and got this part after seeing a P0401 Code on my truck PCM-EGR Insufficient Flow Detected. I hope to get better gas mileage on the road. I took my old one to the store to compare it to the new aftermarket one, the one I took off was factory and there was corrosion on the one by the way, I can say it was time to be replaced. The old one sure was making my truck not ride smoothly.This plastic design is slightly different than the oem metal sensor it replaced. I correctly hooked the hoses back the way that they suppose to go, I did not hook'em wrong. My truck sure was hesitating, stumbling, poor low speed acceleration 1st thru 3rd gear when I was on the road. It was easy and simple to change it out on the truck, I pray that the hesitation is gone when i get on the road. The code is not present anymore on my diagnostic device. Im glad I ordered online and saved good, 35% off one time code use per household. Thank You AAP for good discount codes. You the best.The factory sensor is made of aluminum and corodes badly

              • Was this a gift?:
              • No

              Comment on this reviewHelp Icon

              (5 of 11 customers found this review helpful)

               
              5.0

              Better than the original!

              By 

              from Norcross, GA

              About Me Casual Driver

              Verified Buyer
              Helpful Reviewer

              Pros

              • Exact fit

              Cons

              • None

              Best Uses

                Comments about CARQUEST by BWD Exhaust Gas Recirculation Pressure Feedback Sensor:

                I got a check engine code P-401 for the egr system but after doing some research I found it was this part that was bad. The best thing is that I got better fuel mileage after replacing it.

                • Was this a gift?:
                • No

                Comment on this reviewHelp Icon

                Displaying reviews 1-10

                Back to top

                Previous | Next »

                Do you have questions about this product?

                 

                Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

                29 Questions | 36 Answers
                Displaying questions 1-10Previous | Next »
                • Q:

                  I would like the pin out and how to determine which pin goes to sensor common, sensor power, and sensor signal? I there a drawing of the device indicating this?
                  Asked on 11/23/2014 by DLWit

                  1 answer

                  • CUSTOMER CARE

                    A:

                    Hi DLWit, I could be of some help! I have forwarded some generic information to your email address for a 2000 Crown Vic. There may be some variations based on the exact vehicle.

                    Answered on 11/25/2014 by Solomon
                • Q:

                  my 1996 ford f150 5.0 eddie bauer uses a aluminum dpfe will this work instead?
                  Asked on 4/14/2014 by mike from san antonio tx

                  1 answer

                  • CUSTOMER CARE

                    A:

                    Hi mike, I'm happy to help you! This black plastic OE alternative DPFE will work well with your vehicle.

                    Answered on 4/14/2014 by Steve from AAP
                • Q:

                  This part, for removal and installation on 01' Ford Explorer 5.0, if you notice, has two holes in it; without question, they are for bolts that secure it to the motor. What size are these bolts? Or, what size socket or wrench do I need?
                  Asked on 3/28/2013 by Russ from Indiana

                  2 answers

                  • CUSTOMER CARE

                    A:

                    For any further assistance regarding the BWD EGR Position Sensor - Part No. EGR155 please call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

                    Answered on 3/29/2013 by John the Car-Doc from AAP
                  • A:

                    10 mm

                    Answered on 1/15/2015 by mark from brandon
                • Q:

                  Why would I need and 1nch and a half wrench to unbolt the sensor? I was asking about the sensor, not EGR set up.
                  Asked on 3/25/2013 by russ from Indiana

                  1 answer

                  • CUSTOMER CARE

                    A:

                    Sorry for any confusion caused. The EGR sensor (BWD EGR Position Sensor - Part No. EGR155) has to be pulled with hands. If it is stuck on the tubes pretty tightly you need both hands to pull the sensor out of that rubber hose. Hold steady the 2 metal pipes (you don't want to break those pipes) and one twisting or pulling out the sensor. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

                    Answered on 3/28/2013 by John the Car-Doc from AAP
                • Q:

                  What size socket or wrench do I need to remove this from 01 Explorer? Very difficult to get to being so tight against the firewall.
                  Asked on 3/23/2013 by Russ from Indiana

                  2 answers

                  • CUSTOMER CARE

                    A:

                    With respect to your inquiry on the BWD EGR Position Sensor - Part No. EGR155 you would need a 1-1/16" wrench to break loose the EGR tube bolts. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

                    Answered on 3/25/2013 by John the Car-Doc from AAP
                  • A:

                    one side of the sensor hooks on a bracket,other hole goes over a thread post and nut fastens it down 6mm socket.

                    Answered on 11/16/2013 by john from tampa,fl.
                • Q:

                  Where is this sensor located also instructions say i may have to modify vacume lines ?
                  Asked on 12/26/2012 by lew

                  1 answer

                  • CUSTOMER CARE

                    A:

                    For further assistance regarding the BWD EGR Pressure Feedback Sensor (Part No. EGR155), please provide the year, make, model and engine size of your vehicle. For more information, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.

                    Answered on 12/26/2012 by Steve from AAP
                • Q:

                  what causes them to melt
                  Asked on 8/14/2012 by larry from flint mi.

                  1 answer

                  • CUSTOMER CARE

                    A:

                    If the raw unburned gas is passing through the exhaust system including your catalytic converter and coming out of the tail pipe. It makes the EGR Pressure Feedback Sensor to melt. So raw gas is leaving from your cylinders. We would suggest taking your vehicle to a certified mechanic for a proper diagnosis before buying and having parts installed that may not (solve/be) the problem. For further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.

                    Answered on 8/15/2012 by Rick from AAP
                • Q:

                  I purchased this sensor and it was the wrong part that I needed.
                  I actually need the EGR vacuum solenoid that is giving me trouble.
                  Question is if I can return original part bought and in return purchase the part I need without any hassels.
                  Employee stated that I could not return part once I bought it.
                  I appreciate an answer from you.
                  Thank you.............
                  Asked on 4/15/2012 by Erasmo Menodza from Corpus Christi, Tx

                  1 answer

                  • CUSTOMER CARE

                    A:

                    Please feel free to call 1-877-238-2623 and one of our representatives will gladly assist you with any questions or concerns you may have.

                    Answered on 4/17/2012 by Steve from AAP
                • Q:

                  i have a ford f 150 and i have replaced fuel filter, change plugs and it still dont want to crank up its like its not getting gas
                  Asked on 1/25/2012 by sherry from sc

                  1 answer

                  • CUSTOMER CARE

                    A:

                    I would suggest taking your vehicle to a certified mechanic for a proper diagnosis before buying and having parts installed that may not (solve/be) the problem.

                    Answered on 1/25/2012 by DIY Daniel from AAP
                • Q:

                  Where is the EGR valve pressure sensor located on a 1996 sport ford explore 4 cylinder?
                  Asked on 11/27/2011 by Bosslady from Gary,Indiana

                  1 answer

                  • CUSTOMER CARE

                    A:

                    It is located on the on the back of the engine, near the wiper cowl, mounted to the back of the upper intake manifold.

                    Answered on 11/28/2011 by Dennis from AAP
                Displaying questions 1-10Previous | Next »

                Do you have a question about this product? 

                Check out the specials in our monthly flyer.
                 
                 
                Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.