Electrical Fuel Pump Kit
Hover over the image to zoom in
Share this:

Bosch Electrical Fuel Pump Kit

Part No. 69131 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

All Bosch fuel pumps conform to an "OE or greater" standard for fit, form and function. This means you get a long-lasting, high-performing pump that fits right the first time.

Product Features:
  • OE Fit
  • OE Form
  • OE Function
Back To Top
Electric Or Mechanical:Electric
Internal Or External:In-tank

REVIEW SNAPSHOT®

by PowerReviews
BoschElectrical Fuel Pump Kit
 
4.4

(based on 5 reviews)

Ratings Distribution

  • 5 Stars

     

    (4)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (1)

  • 1 Stars

     

    (0)

100%

of respondents would recommend this to a friend.

Pros

  • Easy to use (4)

Cons

No Cons

Best Uses

  • Trucks (4)
    • Was this a gift?:
    • No (5)

Reviewed by 5 customers

Displaying reviews 1-5

Back to top

(8 of 12 customers found this review helpful)

 
5.0

Part works great and easy installation.

Profile Image

By 

from Lake Charles, La.

About Me Mechanic

Verified Buyer
Helpful Reviewer

Pros

  • Easy To Use

Cons

    Best Uses

    • Trucks

    Comments about Bosch Electrical Fuel Pump Kit:

    This part worked great and I didnt have to buy the whole assembly (float and sending unit were working fine).

    • Was this a gift?:
    • No

    Comment on this reviewHelp Icon

    (0 of 3 customers found this review helpful)

     
    5.0

    Perfect fit, very simple install

    By 

    from Pleasantville N.J.

    About Me Truck Enthusiast

    Verified Buyer

    Pros

    • 15 Mins To Install
    • Easy To Use
    • Versatile

    Cons

      Best Uses

      • Large Cars
      • Small Cars
      • Trucks

      Comments about Bosch Electrical Fuel Pump Kit:

      That 15 mlnute install is to assemble of course , the whole pump replace , dropping tank reinstalling tank was about four hours in my driveway

      • Was this a gift?:
      • No

      Comment on this reviewHelp Icon

      (3 of 5 customers found this review helpful)

       
      5.0

      WELL BUILT/EASY INSTALL

      By 

      from ROSELLE,ILL

      About Me Auto Enthusiast

      Verified Buyer
      Helpful Reviewer

      Pros

      • Easy To Use

      Cons

        Best Uses

        • Trucks

        Comments about Bosch Electrical Fuel Pump Kit:

        WAS VERY EASY TO INSTALL.HARDEST PART IS GETTING TO THE PUMP.

        • Was this a gift?:
        • No

        Comment on this reviewHelp Icon

        (6 of 9 customers found this review helpful)

         
        2.0

        best price BUT...

        By 

        from MO

        About Me Farmer

        Verified Buyer
        Helpful Reviewer

        Pros

        • Best Price
        • Fixed the issue

        Cons

        • Filter not available
        • Warranty voided

        Best Uses

          Comments about Bosch Electrical Fuel Pump Kit:

          Good price for a replacement pump... saved $300 over buying a complete fuel module but I had to reuse my old filter which voided the lifetime warranty... I contacted AutoZone, Advance, O'Reilly's, Napa, & Parts City; no one could provide the proper filter to fit my OEM module (they want to sell you the entire module because of a minor design change in the $15 filter). Ridiculous. I saved money on the pump replacement but wasted hours and drove many miles trying to locate a new module filter for my '03 Ford F250 SuperDuty. Even the dealerships will only sell a complete pump replacement module ($500+). I am disappointed Advance could not provide the proper required filter for my application with my original order.

          • Was this a gift?:
          • No

          Comment on this reviewHelp Icon

          (7 of 13 customers found this review helpful)

           
          5.0

          Great product

          By 

          from Florida

          About Me Casual Driver

          Verified Buyer
          Helpful Reviewer

          Pros

          • Easy To Use

          Cons

            Best Uses

            • Large Cars
            • Small Cars
            • Trucks

            Comments about Bosch Electrical Fuel Pump Kit:

            Bosch makes Great products that perform.....helps keep my old car going.

            • Was this a gift?:
            • No

            Comment on this reviewHelp Icon

            Displaying reviews 1-5

            Back to top

            Do you have questions about this product?

             

            Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

            8 Questions | 9 Answers
            Displaying questions 1-8
            • Q:

              do you have to drop the tank ? 1997 lincoln towncar signiture series 4.6lr engine
              Asked on 1/31/2013 by amy from bellefontaine,ohio

              1 answer

              • CUSTOMER CARE

                A:

                With reference to the Bosch Electrical Fuel Pump Kit part# 69131, it is recommended to drop the tank with care to replace the fuel pump on your 1997 Lincoln Town Car Signature. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

                Answered on 2/1/2013 by Morgan from AAP
            • Q:

              Where is fuel filter located for a 2001 towncar?
              Asked on 10/5/2012 by roundman from lebanon va

              1 answer

              • CUSTOMER CARE

                A:

                The fuel filter should be located at the passenger side bottom of the car right below the back seat door. For further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.

                Answered on 10/5/2012 by Steve from AAP
            • Q:

              How do I install the kit? And is a new strainer necessary? 2001 Mazda 626, 2.0L engine.
              Asked on 8/26/2012 by Giffy from Brooklyn, N.Y

              1 answer

              • CUSTOMER CARE

                A:

                The 2001 Mazda 626 came standard with a 2.0-liter four-cylinder engine and a manual or automatic transmission. The fuel pump is located inside the gas tank, so you must remove the gas tank to service the fuel pump. Replacing the fuel pump is an involved job that requires the help of an assistant at several times throughout the process.This process will also work for models equipped with the 2.5-liter six-cylinder. Park the vehicle on a level surface and set the parking brake. Open the vehicle hood and support it with the hood prop rod. Install the 9-volt battery to the memory saver and plug the memory saver into the cigarette lighter socket. Disconnect the negative battery cable from the battery with the socket and ratchet. Open the relay center that is between the battery and strut tower on the left side of the engine bay. The fuel pump relay is in the third row of relays from the strut tower and it is the second relay from the driver's side in that row. Start the engine and allow it to run until it stalls out and then crank it for an additional 10 seconds to relieve the fuel pressure. Turn the ignition key to the “Off” position. Remove the gas cap to relieve any fuel vapor pressure. Place the wheel chocks around the front wheels. Lift the rear of the vehicle into the air with the floor jack and place the jack stands under the rear suspension. Lower the floor jack until the vehicle rests securely on the jack stands. Remove the floor jack. Place a 5-gallon gas can directly under the fuel fill door. Install one end of the siphon pump into the fuel filler neck and direct the other end into the 5-gallon gas can. Siphon as much fuel from the tank as possible, making sure not to over fill each gas can. Store the removed fuel in a safe place for later use. Lie down under the vehicle and look to the front of the tank to locate the fuel line connections. Squeeze the plastic tabs for each fuel tank line and separate the sending and return lines from the fuel tank lines. Disconnect the wiring harness from the fuel pump connector. Squeeze the pressure clamp for the fuel filter neck and no return valve and slide the clamp away from the tank. Remove the fuel filler neck, no return valve and the evaporative emissions vent hose. Place the floor jack directly under the fuel tank and raise the jack arm until there is just enough room to fit the block of wood between the tank and the jack arm. Place the block of wood between the tank and jack arm. Raise the jack arm until the wood makes contact with the fuel tank and shield, but do not apply any additional pressure. Instruct the helper to hold the fuel tank in place. Remove the tank strap bolts with the socket and ratchet. Swing the tank straps down and remove them from under the vehicle. Instruct the helper to balance the tank on the floor jack while the fuel tank is lowered from its position under the vehicle. Remove the fuel tank and shield from the block of wood and jack. Slide the fuel tank and shield from under the vehicle. Squeeze the plastic quick connectors securing the fuel tank lines to the fuel pump inlet and outlet hoses, then disconnect the fuel tank hoses from the fuel pump. Remove the screws securing the fuel pump to the fuel tank with the ratchet and bit-driver attachment. Lift the fuel pump out of the fuel tank and discard its mounting gasket. Place the new fuel pump mounting gasket onto the fuel tank opening. Line up the holes in the gasket with the threaded holes in the fuel tank. Set the new fuel pump into position. Install the mounting screws and tighten to 10 to 19 inch-pounds with the inch pounds torque wrench and bit driver. Slide the fuel tank under the vehicle. Place the block of wood and floor jack under the fuel tank mounting location. Lift the fuel tank onto the block of wood and jack arm with the assistance of your helper. Instruct the helper to maintain the tank balance and lift the fuel tank into position with the floor jack. Hook the fuel straps into position on the front side of the tank and shield, and swing them into position at the rear of the tank. Install the tank strap bolts and tighten to 32 to 44 foot-pounds with the torque wrench. Lower the floor jack and block of wood. Install the new fuel line retainer clips onto the fuel pump connections by sliding them over the fuel lines on the fuel pump. Clip the sending and return lines into place on the fuel pump. Install the fuel filler neck and no return valve, and then install the clamps. Install the evaporative emission lines to its respective connection. Lift the rear of the vehicle off of the jack stands with the floor jack and remove the jack stands. Lower the rear of the vehicle to the ground and remove the floor jack. Fill the fuel tank with the gas that was removed previously and stored in gas cans. Install the fuel filler cap and tighten until it clicks three times. Inspect the socket for the fuel pump relay and locate terminal number 30, which is the bottom left terminal. Connect the jumper wire to terminal 30. Loosen the body ground on the core support near the hood latch with the socket and ratchet. Install the opposite end of the jumper wire to the body ground and tighten the ground bolt snug with the socket and ratchet. Connect the negative battery cable to the battery and tighten the terminal with the socket and ratchet. The fuel pump will turn on as soon as the negative battery terminal is connected to the battery. Allow the fuel pump to operate continuously for the next five minutes. While the fuel pump is running inspect the fuel system for any leaks and replace any leaking lines or hoses as necessary. Loosen the body ground at the core support with the socket and ratchet. Remove the jumper wire from the body ground. Tighten the body ground bolt snug with the socket and ratchet. Disconnect the jumper wire from fuel pump relay socket 30.Install the fuel pump relay. Install the fuse center lid and shut the vehicle hood. For any further assistance, please visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.

                Answered on 8/26/2012 by Vincent from AAP
            • Q:

              Do you need to drop the tank to install? I've heard both yes and no.
              Thanks!
              Asked on 2/16/2012 by Anonymous

              2 answers

              • A:

                Yes.But I saw on you tube where you can cut a hole in the van floor with a grinder.Be careful !!!!

                Answered on 6/24/2012 by russell from raleigh nc
              • CUSTOMER CARE

                A:

                If you could please provide the year, make, model and engine size of the vehicle and we would be better able to assist you.

                Answered on 2/16/2012 by Steve from AAP
            • Q:

              Does this include a strainer
              Asked on 2/6/2012 by Anonymous

              1 answer

              • CUSTOMER CARE

                A:

                No, this Bosch Electrical Fuel Pump Kit with part# 69131 does not include the strainer.

                Answered on 2/6/2012 by Vincent from AAP
            • Q:

              does this kit comes with a float or is it sold seperately?
              Asked on 1/21/2012 by Anonymous

              1 answer

              • CUSTOMER CARE

                A:

                The Fuel Pump Kit from Bosch does not include the float. It has precision spin-balanced and polymer-encased armature for reduced noise and vibration.

                Answered on 1/22/2012 by DIY Daniel from AAP
            • Q:

              i need found image to intallation
              Asked on 8/22/2011 by Anonymous

              1 answer

              • CUSTOMER CARE

                A:

                If you could please provide the year, make, model and engine size of the vehicle and we would be better able to assist you.

                Answered on 8/23/2011 by Steve from AAP
            • Q:

              where is the fuel pump located? 2001 mazda 626 Ls 4cyl.
              Asked on 12/30/2010 by t-bone from winston salem,nc

              1 answer

              • CUSTOMER CARE

                A:

                In the gas tank.

                Answered on 12/31/2010 by Mike the Auto Parts Master from AAP
            Displaying questions 1-8

            Do you have a question about this product? 

            Check out the specials in our monthly flyer.
             
             
            Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.