100 PSI Replacement Oil Pressure Sensor
Hover over the image to zoom in
Share this:

Autometer 100 PSI Replacement Oil Pressure Sensor

Part No. 2242 Warranty  

Fit of this part varies by vehicle & equipment specs Type of Fit

For use with short sweep electric oil pressure gauges. 1/8" NPT Male Thread. Includes 1/4" NPT adapter fitting.
Back To Top
Height (in.):3"
Width (in.):2"

Do you have questions about this product?(earn points for answers!)

 

Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.

42 Questions | 43 Answers
Displaying questions 1-10Previous | Next »
  • Q:

    Where is the oil pressure sensor located on a 1998 mazda 626 2.5l v6
    Asked on 9/8/2014 by Dave from Rhode island

    1 answer

    • CUSTOMER CARE

      A:

      Hi Dave, I'm happy to assist you! The oil pressure sensor is connected to your engine block. It has two wires connected to it and one is directly linked to the oil pressure gauge located on your dashboard. The sensor is typically located at the front of your engine block near the fuel filter and close to the intake manifold. However, check your owner's manual to confirm its actual location.

      Answered on 9/9/2014 by Vincent from AAP
  • Q:

    Where is the the oil pressure sensor located on 1996 Chevy s10? Do you need a special tool to remove it?
    Asked on 7/27/2014 by Mendybeth

    1 answer

    • CUSTOMER CARE

      A:

      Hi Mendybeth, happy to help you! It is located under the hood, passenger side lower engine area, above the oil pan. To replace the oil pressure sensor, you will need a socket set, a torque wrench, an oil filter, an adjustable wrench, a drainage basin, and new oil.

      Answered on 7/29/2014 by Vincent from AAP
  • Q:

    Where is the oil pressure sensor on 97 deville
    Asked on 5/3/2014 by chuck-d from atlanta ga.

    1 answer

    • CUSTOMER CARE

      A:

      Hi chuck-d, glad to assist! It is located under the hood, on the drivers side of the engine, right behind the oil filter.

      Answered on 5/4/2014 by Vincent from AAP
  • Q:

    Where is the Oil Pressure Sensor for a 2007 Chevy Avalanche?
    Asked on 3/18/2013 by Tuddie from Ohio

    1 answer

    • CUSTOMER CARE

      A:

      With reference to your inquiry on the Autometer 100 PSI Replacement Oil Pressure Sensor - part# 2242, the oil pressure sensor on your Chevy Avalanche would be located on the top [center to right] rear of motor. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

      Answered on 3/18/2013 by Vincent from AAP
  • Q:

    were is the oil sensor on 1997 ply.breeze
    Asked on 2/25/2013 by randy from pulaski va 24301

    1 answer

    • CUSTOMER CARE

      A:

      This part Autometer 100 PSI Replacement Oil Pressure Sensor, Part No. 2242 is universal and not a direct fit for your vehicle 1997 Plymouth Breeze. This is a one size fits most, slight modification may be required. It is located on the middle of the block on the firewall side.
      For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

      Answered on 2/25/2013 by Aaron from AAP
  • Q:

    Is this the correct part for 2005 Jeep GC limited 4.7L Oil Pressure sending unit?
    Asked on 1/16/2013 by RWC from NJ

    1 answer

    • CUSTOMER CARE

      A:

      This part Autometer 100 PSI Replacement Oil Pressure Sensor, Part No. 2242 is universal and not a direct fit for your vehicle 2005 Jeep GC Limited 4.7L. This is a one size fits most, slight modification may be required.
      For any further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and our representatives would be more than happy to assist you.

      Answered on 1/17/2013 by Aaron from AAP
  • Q:

    LOCATION OF OIL PRESSURE SENSOR.
    2003 GMC YUKON XL DENALI 6.0
    Asked on 1/4/2013 by KEITH

    1 answer

    • CUSTOMER CARE

      A:

      With reference to this Autometer 100 PSI Replacement Oil Pressure Sensor - part# 2242, the oil pressure sensor on your GMC YUKON XL DENALI should be located on the rear of the engine, directly behind the intake manifold. For any further assistance, please visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.

      Answered on 1/5/2013 by Vincent from AAP
  • Q:

    Where is the oil pressure sensor located in a 2303 Cadillac SLS ?
    Asked on 11/17/2012 by Phil from Crystal City, TX

    1 answer

    • CUSTOMER CARE

      A:

      With reference to this Autometer 100 PSI Replacement Oil Pressure Sensor - part# 2242, the oil pressure sensor on your Cadillac SLS should be located at the oil filter canister right below the bell. For any further assistance, please visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.

      Answered on 11/18/2012 by Vincent from AAP
  • Q:

    I have a 2005 Nissan Xterra S the oil pressure gauges started running high (the needle is maxed out even when idling). I checked the oil level and it is fine. A friend suggested it might be a oil pressure sensor. Does this sound correct?
    Asked on 5/29/2012 by Anonymous

    1 answer

    • CUSTOMER CARE

      A:

      Yes, the oil pressure sensor should be the possible cause of the problem. However, I would suggest taking your vehicle to a certified mechanic for a proper diagnosis before buying and having parts installed that may not (solve/be) the problem.

      Answered on 5/30/2012 by Vincent from AAP
  • Q:

    where is the oil pressure sensor on 2000 chevy monty carlo
    Asked on 5/14/2012 by Anonymous

    1 answer

    • CUSTOMER CARE

      A:

      Lift your Monte Carlo on passenger side. Place on jack stand. Remove the passenger front tire (to make it easier to get to sensor). The sensor is about the size of a roll of quarters and is located right to the left of the oil filter.

      Answered on 5/16/2012 by Vincent from AAP
Displaying questions 1-10Previous | Next »

Do you have a question about this product? 

Create or view your online garage

Check out the specials in our monthly flyer

 
 
Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.