Evaporative Emission Canister Purge Solenoid Valve
Hover over the image to zoom in
Share this:

ACDelco Evaporative Emission Canister Purge Solenoid Valve

Part No. 214-1680 Warranty  

See if this part fits a specific vehicle.

Check Vehicle Fit

ACDelco is a global leader in automotive replacement parts and related services and offers quality aftermarket products for most makes and models, including General Motors, Ford, Chrysler, Toyota and Honda, plus many original equipment service replacement parts. ACDelco products can be found in more than 100 countries located on six of the seven continents and are sourced globally to meet the needs of the local markets, including "maintenance" parts commonly replaced during the lifetime of a vehicle (e.g., batteries, oil filters, air filters, wiper blades, shocks and brakes), as well as "repair" parts (e.g., alternators, radiators, chassis and heating/cooling components). ACDelco offers more than 80,000 parts across 37 product lines.

ACDelco has over 100 years of experience in the automotive industry and is a brand of GM Customer Care and Aftersales, a division of General Motors. ACDelco employs a two- or three-tiered distribution model, utilizing a network of appointed wholesale distributors to service independent installers, ACDelco independent service centers, retail and fleet customers.

Back To Top
O.E.M. Replacement:Yes

Do you have questions about this product?(earn points for answers!)

 

Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.

20 Questions | 20 Answers
Displaying questions 1-10Previous | Next »
  • Q:

    where is this part located on a 2007 Chevrolet Colorado?
    Asked on 4/3/2014 by Elden

    1 answer

    • CUSTOMER CARE

      A:

      Hi Elden, glad to help! The EVAP canister purge solenoid valve should be located under the vehicle's undercarriage, towards the rear and mounted on a canister. For help with your project, I recommend purchasing a Haynes or Chilton repair manual specifically for your vehicle. This should be able to assist you further into detail on how to repair or replace specific parts.

      Answered on 4/3/2014 by Steve from AAP
  • Q:

    Where is this located on a 2007 GMC Yukon XL SLE?
    Asked on 3/27/2014 by Jon from Worthington, Indiana

    1 answer

    • CUSTOMER CARE

      A:

      Hi Jon, I'm happy to help! The solenoid is located above the spare tire. When you pull down the spare tire there's a cross member and the valve is on top of that attached to a black metal bracket. The solenoid is canister snapped with 2 hard plastic hoses coming off it.

      Answered on 4/7/2014 by John the Car-Doc from AAP
  • Q:

    The picture you have for purge valve solenoide for Isuzu I 290 is the the correct part number on the part125975567 I got one for a 2008 Colorado because they are the same truck . Want to know if the colardo purge valve will work on Isuzu i290
    Asked on 2/9/2014 by jeremy from houston texas

    1 answer

    • CUSTOMER CARE

      A:

      Hi Jeremy, happy to help you! This ACDelco Evaporative Emission Canister Purge Solenoid Valve (Part No. 214-1680) would fit 2007 and 2008 Isuzu i-290.

      Answered on 2/11/2014 by Steve from AAP
  • Q:

    Where is the Evaporative Emission Canister Purge Solenoid Valve located on a 2007 Chevy Silverado? We are getting a code of PO449.
    Asked on 1/23/2014 by Herk from Buffalo, NY

    1 answer

    • CUSTOMER CARE

      A:

      Hi Herk, glad to assist you! This part is is mounted to the frame of the truck just in front of the fuel tank. 22. For help with your project, I recommend purchasing a repair manual specifically for your vehicle. This should be able to assist you further into detail on how to repair or replace specific parts.

      Answered on 1/24/2014 by Steve from AAP
  • Q:

    Is this located on the gas fill vent? I have a service code of po446
    Asked on 8/7/2013 by John from Peoria, Il.

    1 answer

    • CUSTOMER CARE

      A:

      This ACDelco Evaporative Emission Canister Purge Solenoid Valve - part# 214-1680 is vehicle specific. For assisting you further, please provide the year, make, model and engine size of the vehicle. You may also call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

      Answered on 8/7/2013 by Vincent from AAP
  • Q:

    how to install part 214-1680 on 07 tahoe how to get clips off
    Asked on 1/26/2013 by shawn

    1 answer

    • CUSTOMER CARE

      A:

      With reference to your inquiry on the ACDelco Evaporative Emission Canister Purge Solenoid Valve - Part No. 214-1680 use a small/medium screwdriver and pry up the middle locking tang on the metal retainer clip that's bolted to the block. The purge valve solenoid slides onto this retainer but is locked into place by a middle finger/tang on the retainer that faces towards the block. The metal retainer clip has a cut out in the middle with a thin locking tang that's bent facing down. From the top of the retainer, insert your screw driver from the transmission side into the slit closest to the transmission and pry up until the center tang is sticking up in the back (closest to the block). Now it should no longer be engaged with the purge valve solenoid. Now you need to pull and wiggle the purge solenoid off of the retainer, it doesn't slide off as easily as you'd expect. Pull the retainers apart to release the vent solenoid from the bracket, and then remove it from the vehicle. To reinstall the vent solenoid, follow the steps for removal in reverse order. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto store and one of our representatives will gladly assist you with any questions or concerns you may have.

      Answered on 1/28/2013 by John the Car-Doc from AAP
  • Q:

    Where is the Evap Canister for 06 Grand Prix GXP
    Asked on 10/17/2012 by Billqb from Michigan

    1 answer

    • CUSTOMER CARE

      A:

      The Evap Canister on your 2006 Pontiac Grand Prix GXP should be located right below the filler neck. This ACDelco Evaporative Emission Canister Purge Solenoid Valve - part# 214-1680 is an exact fit for your 2006 Pontiac Grand Prix GXP. For any further assistance, please visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.

      Answered on 10/17/2012 by Vincent from AAP
  • Q:

    where the evap purge sol in my 2007 alavanche
    Asked on 9/28/2012 by don from port charlotte fl

    1 answer

    • CUSTOMER CARE

      A:

      The EVAP purge solenoid should be located above and ahead of the rear axle under neath the box. For further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.

      Answered on 9/28/2012 by Steve from AAP
  • Q:

    part # 214-1680 AC Delco, need to know which evaporative emission canister purge solenoid valve is this one on your page for my 07 chevy suburban 1500LT VIN 8 is 3. is this for the one on engine or rear bottom of truck?
    Asked on 7/3/2012 by Denis from Staten Island NY

    1 answer

    • CUSTOMER CARE

      A:

      This ACDelco Evaporative Emission Canister Purge Solenoid Valve (Part# 214-1680) should fit your 2007 Chevrolet Suburban 1500 LT. It is the exhaust manifold rear canister purge solenoid valve. For any further assistance, please visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.

      Answered on 7/5/2012 by Ralph from AAP
  • Q:

    where is the evaporator canister located 2008 trailblazer
    Asked on 4/22/2012 by sal

    1 answer

    • CUSTOMER CARE

      A:

      Yes, this part ACDelco Evaporative Emission Canister Purge Solenoid Valve, Part No. 214-1680 manufactured by ACDelco fits your 2008 Chevrolet Trailblazer. The Evaporator canister should be located under your car hood.

      Answered on 4/23/2012 by Aaron from AAP
Displaying questions 1-10Previous | Next »

Do you have a question about this product? 

Create or view your online garage

Check out the specials in our monthly flyer

 
 
Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.