Evaporative Emission Canister Purge Solenoid Valve
Hover over the image to zoom in
Share this:

ACDelco Evaporative Emission Canister Purge Solenoid Valve

Part No. 214-1680 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

ACDelco is a global leader in automotive replacement parts and related services and offers quality aftermarket products for most makes and models, including General Motors, Ford, Chrysler, Toyota and Honda, plus many original equipment service replacement parts. ACDelco products can be found in more than 100 countries located on six of the seven continents and are sourced globally to meet the needs of the local markets, including "maintenance" parts commonly replaced during the lifetime of a vehicle (e.g., batteries, oil filters, air filters, wiper blades, shocks and brakes), as well as "repair" parts (e.g., alternators, radiators, chassis and heating/cooling components). ACDelco offers more than 80,000 parts across 37 product lines.

ACDelco has over 100 years of experience in the automotive industry and is a brand of GM Customer Care and Aftersales, a division of General Motors. ACDelco employs a two- or three-tiered distribution model, utilizing a network of appointed wholesale distributors to service independent installers, ACDelco independent service centers, retail and fleet customers.

Back To Top
O.E.M. Replacement:Yes

Do you have questions about this product?(earn points for answers!)

 

Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.

26 Questions | 26 Answers
Displaying questions 1-10Previous | Next »
  • Q:

    2010 Chevrolet Avalanche LS.
    AC Delco Part No. 214-1680
    Evaporative Emission Canister Purge Solenoid Valve
    Where is this part located on my vehicle.
    Asked on 1/15/2016 by Keith from United States

    1 answer

    • CUSTOMER CARE

      A:

      Hello Keith. Glad to help! The Canister purge solenoid valve is located on the top of the engine. With the hood open facing the engine on the right side (driver side) near the throttle body assembly on the fuel rail. For further assistance we suggest checking a repair manual or a certified mechanic.

      Answered on 1/17/2016 by Panda from AAP
  • Q:

    Hi, is this the same part as the ~Evaporative System Purge Control Valve Circuit~ ? 2008 Chevy HHR Panal LS 2.2 error code P0443
    Asked on 10/28/2014 by akamouse

    1 answer

    • CUSTOMER CARE

      A:

      Hi Akamouse, glad to assist you! The Evaporative System Purge Control Valve Circuit is different from Evaporative Emission Canister Purge Solenoid Valve. The Evaporative Emissions System (EVAP) allows fumes from the gas tank to enter the engine to be burned, rather than vented into the atmosphere as an emission. The purge valve solenoid is supplied switched battery voltage. The ECM controls the valve by operating the ground circuit, opening the purge valve at specific times allowing these gasses to enter the engine. The ECM monitors the ground circuit as well, watching for faults. When the purge solenoid isn't activated, the ECM should see a high voltage on the ground circuit. When the solenoid is activated, the ECM should see the ground voltage pulled low, close to zero. If the ECM doesn't see these expected voltages, or senses an open in the circuit, this code is set. The exact Evaporative System Purge Control Valve Circuit for your 2008 Chevrolet HHR Panal LS 2.2L is currently unavailable online.

      Answered on 11/12/2014 by Steve from AAP
  • Q:

    I have a 2007 suburban with the 8th digit of the vin is 3. Will this take care of a recurring PO466 and where is it located?
    Asked on 8/31/2014 by Johnnie from Omaha Ne. 68130

    1 answer

    • CUSTOMER CARE

      A:

      Sorry, I would not be able to tell you if that is the cause of the P0466 code you are receiving. It could be many things in the emission system. This purge solenoid will be located somewhere near the intake manifold with a couple hoses attached to it. The purpose of this part is to purge the fuel vapor into the intake manifold to be re-burned by the engine.

      Answered on 9/1/2014 by K from AAP
  • Q:

    Will this work with a 2006 Yukon Denali?
    Asked on 6/26/2014 by Mark

    1 answer

    • CUSTOMER CARE

      A:

      Hi Mark, glad to assist you! This will not fit your vehicle. Currently, the exact ignition cylinder for your vehicle is unavailable online. I would recommend that you check with the nearest Advance store and one of our parts pros will be glad to assist you with an alternate availability.

      Answered on 6/27/2014 by Vincent from AAP
  • Q:

    where is part located on 2010 canyon and easy to replace?
    Asked on 5/29/2014 by jeff from northampton,pa

    1 answer

    • CUSTOMER CARE

      A:

      I'm happy to help, Jeff! In the 2010 GMC Canyon, it looks like the purge solenoid valve is on the driver's side of the engine located lower on the block. I found some instructions here: http://forums.trailvoy.com/showthread.php?t=76766. Advance Auto Parts is not responsible for the content of this page and it is provided as use at your own risk by other Canyon and Colorado owners. I also suggest a repair manual for your vehicle to ensure proper installation. Haynes Part No. 24027

      Answered on 5/30/2014 by Heath, ASE Parts Specialist from AAP
  • Q:

    This part will correct P0449 code? For my isuzu 2008 I-290. And where is it located. Thanks.
    Asked on 4/21/2014 by pavlov01

    1 answer

    • CUSTOMER CARE

      A:

      I'm happy to help, Pavlov1! This ACDelco Evaporative Emission Canister Purge Solenoid Valve may help you with your P0449 diagnostic code. There are other parts that could be causing this trouble code. On your 2008 Isuzu I-290 S the part is mounted on the frame behind the gas tank. You will have to move the spare tire to access it. To help you diagnose the issue I have located some information that may help you in troubleshooting the issue. The information on the provided link is provided by another website and Advance Auto Parts is not responsible for the content of their page. The information there is provided as use at your own risk: http://www.obd-codes.com/p0449

      Answered on 4/23/2014 by Heath, ASE Parts Specialist from AAP
  • Q:

    where is this part located on a 2007 Chevrolet Colorado?
    Asked on 4/3/2014 by Elden

    1 answer

    • CUSTOMER CARE

      A:

      Hi Elden, glad to help! The EVAP canister purge solenoid valve should be located under the vehicle's undercarriage, towards the rear and mounted on a canister. For help with your project, I recommend purchasing a Haynes or Chilton repair manual specifically for your vehicle. This should be able to assist you further into detail on how to repair or replace specific parts.

      Answered on 4/3/2014 by Steve from AAP
  • Q:

    Where is this located on a 2007 GMC Yukon XL SLE?
    Asked on 3/27/2014 by Jon from Worthington, Indiana

    1 answer

    • CUSTOMER CARE

      A:

      Hi Jon, I'm happy to help! The solenoid is located above the spare tire. When you pull down the spare tire there's a cross member and the valve is on top of that attached to a black metal bracket. The solenoid is canister snapped with 2 hard plastic hoses coming off it.

      Answered on 4/7/2014 by John the Car-Doc from AAP
  • Q:

    The picture you have for purge valve solenoide for Isuzu I 290 is the the correct part number on the part125975567 I got one for a 2008 Colorado because they are the same truck . Want to know if the colardo purge valve will work on Isuzu i290
    Asked on 2/9/2014 by jeremy from houston texas

    1 answer

    • CUSTOMER CARE

      A:

      Hi Jeremy, happy to help you! This ACDelco Evaporative Emission Canister Purge Solenoid Valve (Part No. 214-1680) would fit 2007 and 2008 Isuzu i-290.

      Answered on 2/11/2014 by Steve from AAP
  • Q:

    Where is the Evaporative Emission Canister Purge Solenoid Valve located on a 2007 Chevy Silverado? We are getting a code of PO449.
    Asked on 1/23/2014 by Herk from Buffalo, NY

    1 answer

    • CUSTOMER CARE

      A:

      Hi Herk, glad to assist you! This part is is mounted to the frame of the truck just in front of the fuel tank. 22. For help with your project, I recommend purchasing a repair manual specifically for your vehicle. This should be able to assist you further into detail on how to repair or replace specific parts.

      Answered on 1/24/2014 by Steve from AAP
Displaying questions 1-10Previous | Next »

Do you have a question about this product? 

Create or view your online garage

Check out the specials in our monthly flyer

 
 
Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.