Connector with Leads
Hover over the image to zoom in
Share this:

ACDelco Connector with Leads

Part No. PT1604 Warranty  

See if this part fits a specific vehicle.

Check Vehicle Fit

ACDelco is a global leader in automotive replacement parts and related services and offers quality aftermarket products for most makes and models, including General Motors, Ford, Chrysler, Toyota and Honda, plus many original equipment service replacement parts. ACDelco products can be found in more than 100 countries located on six of the seven continents and are sourced globally to meet the needs of the local markets, including "maintenance" parts commonly replaced during the lifetime of a vehicle (e.g., batteries, oil filters, air filters, wiper blades, shocks and brakes), as well as "repair" parts (e.g., alternators, radiators, chassis and heating/cooling components). ACDelco offers more than 80,000 parts across 37 product lines.

ACDelco has over 100 years of experience in the automotive industry and is a brand of GM Customer Care and Aftersales, a division of General Motors. ACDelco employs a two- or three-tiered distribution model, utilizing a network of appointed wholesale distributors to service independent installers, ACDelco independent service centers, retail and fleet customers.

Back To Top

REVIEW SNAPSHOT®

by PowerReviews
ACDelcoConnector with Leads
 
5.0

(based on 1 review)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 1 customer

Displaying review 1

Back to top

(24 of 48 customers found this review helpful)

 
5.0

Works perfect and solved the problem

By readyred

from Milwaukee, wi

Verified Buyer
Level 2

Pros

    Cons

      Best Uses

        Comments about ACDelco Connector with Leads:

        The van was stalling and killing once in a while pulling camshaft code. Replaced the camshaft ran better started doing it again. Crawled underneath when running wiggled connector the van would either kill and start running poor. Bought this connector, cut out the old, soldered and heat shrink the new connector back. The van now runs like a top.

        • Was this a gift?:
        • No

        Comment on this review(earn points)

        Do you have questions about this product?(earn points for answers!)

         

        Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.

        23 Questions | 24 Answers
        Displaying questions 1-10Previous | Next »
        • Q:

          WHERE DO I INSTALL THIS IN A 1998 OLDSMOBILE CUTLASS
          Asked on 2/27/2013 by NAE BROWN from Houston, TX

          1 answer

          • CUSTOMER CARE

            A:

            This ACDelco Connector with Leads - part# PT1604 is a multi-purpose connector. It serves to provide an electrical connection to whichever link in the wiring that it is being used for. For assisting you further, please provide us the exact connector which you are looking to replace for. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

            Answered on 2/28/2013 by Vincent from AAP
        • Q:

          will this replace the connector going to the ignition coil on a 1998 blazer vortec v6?
          Asked on 1/3/2013 by james76

          1 answer

          • CUSTOMER CARE

            A:

            Yes, this ACDelco Connector with Leads part# PT1604 is an exact fit for your 1998 Chevrolet Blazer and it should work as a good replacement connector for your vehicle. For more information, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our technicians would be more than happy to assist you.

            Answered on 1/3/2013 by Rick from AAP
        • Q:

          I am looking for the connector (3 leads) for the front (orange) running lamp for my 2006 Saab 9 7x 4.2i will this work? The lamp connects into the front head lamp assemply and is a round lamp that is to the outside of the low beam head light. The light is round and orange. The wires that lead to the connectors broke off and are much too short. I know this is not the perfect fit as a replacement, but can't find the type that came OEM. HELP!
          Asked on 12/27/2012 by Ron from Vero Beach, FL

          1 answer

          • CUSTOMER CARE

            A:

            No, I am sorry. The ACDelco Connector with Leads - Part No. PT1604 is not compatible with your 2006 Saab 9-7x with 4.2L Engine. Unfortunately we do not have an exact fit for your vehicle available with us online. However I would recommend that you check with the nearest Advance Auto store or call us toll free at: 1-877-238-2623 and one of our representatives will gladly assist you with any questions or concerns you may have.

            Answered on 12/28/2012 by John the Car-Doc from AAP
        • Q:

          Is this the correct connector for the crank position sensor for 1997 K1500 GMC Sierra 5.7liter?
          Asked on 6/18/2012 by Harold from Colorado Springs

          1 answer

          • CUSTOMER CARE

            A:

            Yes, this ACDelco Connector with Leads(Part No. PT1604) fits your 1997 GMC C1500 Sierra. For further assistance please feel free to call 1-877-238-2623 and one of our representatives will gladly assist you with any questions or concerns you may have.

            Answered on 6/20/2012 by Steve from AAP
        • Q:

          1997 pontiac grand am se 3.1 the wires from the camshaft sensor are green, brown and red the wires plug into wires that are red, red, brown how do the wires go?
          Asked on 5/27/2012 by Anonymous

          1 answer

          • CUSTOMER CARE

            A:

            We have forwarded the wiring diagram to your email address. For any further assistance please feel free to call 1-877-238-2623 and one of our representatives will gladly assist you with any questions or concerns you may have.

            Answered on 5/28/2012 by John the Car-Doc from AAP
        • Q:

          when installing this part, is there a specific order in which the leads should connect to. as there is two ports in which you can hook this connector in?
          Asked on 5/21/2012 by Anonymous

          1 answer

          • CUSTOMER CARE

            A:

            To help you in a better manner, if you could please include the year, make, model and engine specification of the vehicle and we would be better able to assist you.

            Answered on 5/22/2012 by Aaron from AAP
        • Q:

          what is the location do i need to disconnect battery
          Asked on 4/28/2012 by Anonymous

          2 answers

          • CUSTOMER CARE

            A:

            For assisting you further on locating the fuel pump harness connector, please provide the year, make, model and engine size of the vehicle.

            Answered on 4/30/2012 by Vincent from AAP
          • A:

            2001blazer4,3v6

            Answered on 5/28/2012 by rick from houstontx
        • Q:

          What side of the vehicle will airbag sensor 1 be located.
          Asked on 3/29/2012 by Anonymous

          1 answer

          • CUSTOMER CARE

            A:

            To help you in a better manner, if you could please include the year, make, model and engine specification of the vehicle and we would be better able to assist you.

            Answered on 3/30/2012 by Aaron from AAP
        • Q:

          Could you tell me what part (like this) I should use as a connector 1995 maxima sensor
          Asked on 1/20/2012 by Anonymous from houma,la

          1 answer

          • CUSTOMER CARE

            A:

            No, this part ACDelco Connector with Leads, part number PT1604 manufactured by ACDelco does not fit your 1995 Nissan Maxima.
            To help you in a better manner, Please be more specific on your query, (ie; which sensor ).
            For any other assistance to best answer your question, Please call us at 1-877-ADVANCE (238-2623) and we would be more than happy to assist you.

            Answered on 1/25/2012 by Aaron from AAP
        • Q:

          Could you tell me what part (like this) I should use as a connector for the MAP sensor on my Buick Rivier 1997 (Vin K)? Thanks. I would prefer the AC Delco brand, if possible.
          Asked on 8/5/2011 by Anonymous

          1 answer

          • CUSTOMER CARE

            A:

            ACDelco Connector with Leads with Part No. PT1231 should fit your 1997 Buick Riviera.

            Answered on 8/8/2011 by Vincent from AAP
        Displaying questions 1-10Previous | Next »

        Do you have a question about this product? 

        Create or view your online garage

        Check out the specials in our monthly flyer

         
         
        Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.