Window-Weld Round Ribbon Sealer, 3/8" x 15 ft Kit
Hover over the image to zoom in
Share this:

3M Window-Weld Round Ribbon Sealer, 3/8" x 15 ft Kit

Part No. 08612 Warranty  

Fit of this part varies by vehicle & equipment specs Type of Fit

Contains one roll of sealer and setting blocks. Its unique feature of controlled compressibility allows easy installation yet will not squeeze out or allow lite to contact pinchweld. Sufficient material to replace one windshield or backlite.

Product Features:
  • Kit containing a 15 foot long roll of 3/8 inch sealer and setting blocks.
  • Controlled compressibility allows easy installation yet will not squeeze out or allow light to contact pinchweld.
  • Sufficient material to replace one windshield or backlight.
Back To Top
Container Type:Roll

REVIEW SNAPSHOT®

by PowerReviews
3MWindow-Weld Round Ribbon Sealer, 3/8" x 15 ft Kit
 
5.0

(based on 2 reviews)

Ratings Distribution

  • 5 Stars

     

    (2)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 2 customers

Sort by

Displaying reviews 1-2

Back to top

(2 of 4 customers found this review helpful)

 
5.0

Works great

By Blu

from Katy, Replblic of Texas

About Me Home mechanic

Ask me a question

Verified Buyer
Level 3

Pros

  • Works

Cons

    Best Uses

    • To Seal Your Window

    Comments about 3M Window-Weld Round Ribbon Sealer, 3/8" x 15 ft Kit:

    I used this to re-seal my rear window on my 2002 F150. It is a common leak on this model.
    It took me longer to get the old stuff off than to put the new stuff on and re-install the window.

    If you have a leak from the rear window on your 1997-2003 F150, this is the stuff you need to fix it.

    Comment on this review(earn points)

    (9 of 14 customers found this review helpful)

     
    5.0

    Use this instead of tube sealer!!!

    By alltand

    from Petersburg, VA

    About Me Auto Enthusiast

    Ask me a question

    Verified Buyer
    Level 2

    Pros

    • Can Withstand Use
    • Easy To Use
    • Reliable

    Cons

      Best Uses

      • Automotive Repair Shop
      • Home Garage

      Comments about 3M Window-Weld Round Ribbon Sealer, 3/8" x 15 ft Kit:

      Went on window simply and without a mess, seal my window perfectly. No leaks or extra sealant squishing out.

      Comment on this review(earn points)

      Displaying reviews 1-2

      Back to top

      Do you have questions about this product?(earn points for answers!)

       

      Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.

      16 Questions | 17 Answers
      Displaying questions 1-10Previous | Next »
      • Q:

        The product is called Windo-Weld but all the comments and questions are related to sealing. I want to know if this can use used as an adhesive. I want to install new headlight lenses and use this as an adheasive/sealant.
        Asked on 7/19/2014 by Mark from Sarasota, FL

        1 answer

        • CUSTOMER CARE

          A:

          Happy to assist, Mark! This will not provide a strong enough bond to secure a headlight nor is it recommended for headlights.

          Answered on 7/23/2014 by Vincent from AAP
      • Q:

        Do you need a adhesive weld when you
        use this,such as 08609 superfast urethane,
        Asked on 7/18/2014 by brian from dqyton ohi9

        1 answer

        • CUSTOMER CARE

          A:

          I'm glad to assist, Brian! There is no need for any additional adhesive when using this 3M Window-Weld Round Ribbon Sealer.

          Answered on 7/23/2014 by Heath, ASE Parts Specialist from AAP
      • Q:

        Can I use this product to achieve a weather tight seal for a replacement tail light?
        Asked on 6/9/2014 by Funflyer28

        1 answer

        • CUSTOMER CARE

          A:

          I'm happy to help, Funflyer28! This product is designed to be the outside stripping of a windshield. While it certainly could be used to seal a new taillight, the housing should be watertight on its own and not require any additional sealing. Also, if you ever need to remove the taillight due to damage or to replace a bulb, you may experience difficulty removing this seal. If you are able to, please call 877-ADVANCE (238-2623) or e-mail (webcare@advance-auto.com) us with details of your project and we may be able to help.

          Answered on 6/10/2014 by Heath, ASE Parts Specialist from AAP
      • Q:

        Can this be used on the bottom part of the outside driverside window seal on a '99 olds intrigue? The black weather strip (seal) was cracked during a hail storm.
        Asked on 6/1/2014 by irishh7

        1 answer

        • CUSTOMER CARE

          A:

          I'm happy to help, Irishh7! This product is designed to aid in the replacement of the windshield. If you're speaking of the bottom seal that keeps the window sealed from leaking water down into the door, this would seal that shut. Part No. VQT 9600 could be close to what you're looking for, but would most likely require modification to fit directly. These types of parts are usually more difficult to locate. In many cases, team members at your local store may know of a local business that the parts could be sourced from.

          Answered on 6/4/2014 by Heath, ASE Parts Specialist from AAP
      • Q:

        Can this be used on the bottom part of the outside driverside window seal on a '99 olds intrigue? The black weather strip (seal) was cracked during a hail storm.
        Asked on 6/1/2014 by irishh7

        1 answer

        • CUSTOMER CARE

          A:

          I'm happy to help, Irishh7! This product is designed to aid in the replacement of the windshield. If you're speaking of the bottom seal that keeps the window sealed from leaking water down into the door, this would seal that shut. Part No. VQT 9600 could be close to what you're looking for, but would most likely require modification to fit directly. These types of parts are usually more difficult to locate. In many cases, team members at your local store may know of a local business that the parts could be sourced from.

          Answered on 6/4/2014 by Heath, ASE Parts Specialist from AAP
      • Q:

        Can this be used on the bottom part of the outside driverside window seal on a '99 olds intrigue? The black weather strip (seal) was cracked during a hail storm.
        Asked on 6/1/2014 by irishh7

        1 answer

        • CUSTOMER CARE

          A:

          I'm happy to help, Irishh7! This product is designed to aid in the replacement of the windshield. If you're speaking of the bottom seal that keeps the window sealed from leaking water down into the door, this would seal that shut. Part No. VQT 9600 could be close to what you're looking for, but would most likely require modification to fit directly. These types of parts are usually more difficult to locate. In many cases, team members at your local store may know of a local business that the parts could be sourced from.

          Answered on 6/4/2014 by Heath, ASE Parts Specialist from AAP
      • Q:

        WILL THIS WORK FOR MY 99 VOLKSWAGEN PASSAT FRONT WINDOW?
        Asked on 3/5/2014 by christy

        1 answer

        • CUSTOMER CARE

          A:

          Hi Christy, glad to assist you! Yes, this ribbon sealer should work fine on the front window of your Volkswagen Passat.

          Answered on 3/6/2014 by Vincent from AAP
      • Q:

        CAN THIS ITEM BE USED OUTDOORS OR DOES IT HAVE TO BE PUT ON IN HEATED GARAGE
        Asked on 1/6/2014 by VIC from ELBA AL

        2 answers

        • A:

          It can be installed outside, but the warmer it is, the easier it is to apply and IMO when warmer it initially seals better.

          Answered on 6/2/2014 by Blu from Katy, TX
        • CUSTOMER CARE

          A:

          Hi VIC, good question! This window-weld round ribbon sealer can be used in outdoors.

          Answered on 1/10/2014 by Vincent from AAP
      • Q:

        Is this what I need to put in a replacement back glass in my 2004 Chevy Silverado 1500 extended cab 4 wheel drive? And which size is right I have seen 3 sizes?
        Asked on 3/31/2013 by Handy Heidi from Omaha NE

        1 answer

        • CUSTOMER CARE

          A:

          The 3M Window-Weld Round Ribbon Sealer, 3/8" x 15 ft Kit, 12 Per Case (Part No. 08612) contains one roll of sealer and setting blocks. Its unique feature of controlled compressibility allows easy installation yet will not squeeze out or allow lite to contact pinch-weld. Sufficient material to replace one windshield or back-lite. This part is universal and not vehicle specific. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

          Answered on 4/1/2013 by Steve from AAP
      • Q:

        Can this sealer be used to seal a metal plate to metal wheel well?
        Asked on 2/8/2013 by Chris from Aurora, IL

        1 answer

        • CUSTOMER CARE

          A:

          Sorry, this 3M Window-Weld™ Round Ribbon Sealer - 3/8" x 15" Kit - part# 08612 cannot be used to seal a metal plate. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

          Answered on 2/9/2013 by Vincent from AAP
      Displaying questions 1-10Previous | Next »

      Do you have a question about this product? 

      Create or view your online garage

      Check out the specials in our monthly flyer

       
       
      Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.