Professional Grade Rubberized Undercoating, 16 oz
Hover over the image to zoom in
Share this:

3M Professional Grade Rubberized Undercoating, 16 oz

Part No. 03584 Warranty Details  
3M Professional Grade Rubberized Undercoating is an easy to use black protective coating that does not run when applied, provides anti corrosive protection, sound deadening and insulation to cars, trucks and recreational vehicles.

Product Features:
  • Can be used on cars, trucks and recreational vehicles
  • Black protective coating helps prevent damage from corrosion
  • Sound-deadening properties help reduce road noise
  • No-run formula for clean application
Back To Top
Application Method:Automotive Undercoating
Color:Black
Compatible Surfaces:Under surface of vehicles
Container/Package Size:16 oz
Container/Package Type:Aerosol Can
Rubberized:Yes
Shelf Life:24 months
Sound Deadening:Yes

REVIEW SNAPSHOT®

by PowerReviews
3MProfessional Grade Rubberized Undercoating, 16 oz
 
4.8

(based on 14 reviews)

Ratings Distribution

  • 5 Stars

     

    (12)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

93%

of respondents would recommend this to a friend.

Pros

  • Easy to use (9)
  • Can withstand use (5)
  • Reliable (3)

Cons

No Cons

Best Uses

  • Upkeep (7)
  • Home garage (6)
    • Reviewer Profile:
    • Auto enthusiast (4)
    • Reviewer Profile:
    • Auto enthusiast (4)

Most Liked Positive Review

 

Great product for rubberized undercoat

I purchased a few different kinds of undercoating/bedliner spray on products to test out which I liked. So far have sprayed the duplicolor bedliner on a lower control arm, and the 3m rubberized...Read complete review

I purchased a few different kinds of undercoating/bedliner spray on products to test out which I liked. So far have sprayed the duplicolor bedliner on a lower control arm, and the 3m rubberized undercoating product on the other lower control arm. I followed directions, and started shaking both cans. Almost immediately, I got the ball loose on the 3m can...after 3 minutes, my arm was numb, still didn't get the ball loose on the duplicolor; decided to spray both anyway. 3m came out of the can awesome; good pressure, nice bubbly product how I had envisioned it would look, duplicolor came out nice at first, but then the nozzle got drippy; goes on a little more "flat", coats nicely however. Turned both products upside down and sprayed to clear the product from the nozzel, 3m went just fine, Duplicolor cleared but then some product bubbled at the nozzle, had to manually wipe it off. Left the cans and control arms out in the sun and went back for a 2nd coat, the 3m can's ball was still loose; shook the Duplicolor vigorously again for 2 minutes, still no ball. I let them both sit for another 30 minutes after applying an extra coat. The 3m was dry, but underneath was not cured, as I smudged off a fingerprint-sized area and had to re-apply. Cautiously touching the duplicolor control arm, it felt much harder, and didn't smudge with some pressure. So after some thinking about what to write, if you're looking to coat stuff for sound-deadening and ease of use, the 3m is surely the product for wheel wells, etc. If you're looking to protect undercarriage parts from road debris, etc, I'll be sticking with the duplicolor.

VS

Most Liked Negative Review

 

A good product except....

I'm surprised with today's technology that undercoating still contains asphalt. While drying, I found the odor quite strong. Make sure to wear protective gear and use with very good ventilation. I will use...Read complete review

I'm surprised with today's technology that undercoating still contains asphalt. While drying, I found the odor quite strong. Make sure to wear protective gear and use with very good ventilation. I will use a low VOC product next time that's also ashpalt-free.

Reviewed by 14 customers

Sort by

Displaying reviews 1-10

Back to top

Previous | Next »

(7 of 20 customers found this review helpful)

 
5.0

Works as stated!

By 

from Dayton,OH

About Me Auto Enthusiast, Auto Restorer, Mechanic

Verified Buyer
Helpful Reviewer

Pros

  • Attractive Design
  • Covers Well
  • Durable
  • Easy To Install

Cons

  • None

Best Uses

  • Clean Up Wheel Wells-new
  • Restoration

Comments about 3M Professional Grade Rubberized Undercoating, 16 oz:

Covered well, but should have bought 2 cans for doing partial wheel wells on a corvette.

Comment on this review(earn points)

(10 of 16 customers found this review helpful)

 
5.0

Great product for rubberized undercoat

By 

from hammonton, nj

About Me Auto Enthusiast

Level 3

Pros

  • Easy to use

Cons

    Best Uses

      Comments about 3M Professional Grade Rubberized Undercoating, 16 oz:

      I purchased a few different kinds of undercoating/bedliner spray on products to test out which I liked. So far have sprayed the duplicolor bedliner on a lower control arm, and the 3m rubberized undercoating product on the other lower control arm. I followed directions, and started shaking both cans. Almost immediately, I got the ball loose on the 3m can...after 3 minutes, my arm was numb, still didn't get the ball loose on the duplicolor; decided to spray both anyway. 3m came out of the can awesome; good pressure, nice bubbly product how I had envisioned it would look, duplicolor came out nice at first, but then the nozzle got drippy; goes on a little more "flat", coats nicely however. Turned both products upside down and sprayed to clear the product from the nozzel, 3m went just fine, Duplicolor cleared but then some product bubbled at the nozzle, had to manually wipe it off. Left the cans and control arms out in the sun and went back for a 2nd coat, the 3m can's ball was still loose; shook the Duplicolor vigorously again for 2 minutes, still no ball. I let them both sit for another 30 minutes after applying an extra coat. The 3m was dry, but underneath was not cured, as I smudged off a fingerprint-sized area and had to re-apply. Cautiously touching the duplicolor control arm, it felt much harder, and didn't smudge with some pressure. So after some thinking about what to write, if you're looking to coat stuff for sound-deadening and ease of use, the 3m is surely the product for wheel wells, etc. If you're looking to protect undercarriage parts from road debris, etc, I'll be sticking with the duplicolor.

      Comment on this review(earn points)

      (8 of 16 customers found this review helpful)

       
      5.0

      Worked great

      Pros

      • Durable
      • Easy To Install

      Cons

        Best Uses

        • Restoration

        Comments about 3M Professional Grade Rubberized Undercoating, 16 oz:

        Used it under my truck to spray small areas where the undercoating had worn off over time or where jack stands had rubbed the undercoating off. Easy to use.

        Comment on this review(earn points)

        (13 of 28 customers found this review helpful)

         
        5.0

        Great for DIY Undercoating

        Pros

        • Can Withstand Use
        • Easy To Use
        • Reliable

        Cons

        • Fumes

        Best Uses

        • Home Garage
        • Upkeep

        Comments about 3M Professional Grade Rubberized Undercoating, 16 oz:

        So far no real complaints, seems to be a great product so far. Per the previous reviews, I did purchase a painter's respirator, and I'm very glad I did. I can't attest to the quality difference between the regular and professional series, but for the marginal price difference, and the fact that you'll save a lot of money doing it yourself, it's a great deal.

        Comment on this review(earn points)

        (17 of 30 customers found this review helpful)

         
        5.0

        Great Product

        By 

        from Leeds Alabama

        About Me Auto Enthusiast, Casual Driver

        Pros

        • Can Withstand Use
        • Compact Design
        • Easy To Use
        • Reliable
        • Road Noise Reduction

        Cons

          Best Uses

          • Home Garage
          • To Reduce Road Noise
          • Upkeep

          Comments about 3M Professional Grade Rubberized Undercoating, 16 oz:

          I Own A 2003 Mazda Tribute And Had Alot Of Road Noise ... I Travel On The Interstates Often And Once I Applied This Product It Greatly Reduced The Noise ...

          Comment on this review(earn points)

          (15 of 28 customers found this review helpful)

           
          5.0

          More than one use.

          By 

          from OKC OK

          About Me Mechanic

          Verified Buyer
          Level 2

          Pros

          • Easy To Use

          Cons

            Best Uses

            • Automotive Repair Shop
            • Home Garage
            • Upkeep

            Comments about 3M Professional Grade Rubberized Undercoating, 16 oz:

            Works great as a liner for the inside of my jeep tub and also as a rubberized under coating. There is not just one use for this product. Works great! Use in well ventilated area.

            Comment on this review(earn points)

            (22 of 47 customers found this review helpful)

             
            4.0

            Would buy again

            By 

            from Ft Wayne, IN

            About Me Auto Enthusiast

            Verified Buyer
            Level 2

            Pros

            • Easy To Use

            Cons

              Best Uses

              • Washer boot repair

              Comments about 3M Professional Grade Rubberized Undercoating, 16 oz:

              Worked well

              Comment on this review(earn points)

              (24 of 48 customers found this review helpful)

               
              5.0

              Excellent Product

              By 

              from Kansas City, MO.

              Verified Buyer
              Level 2

              Pros

                Cons

                  Best Uses

                  • Upkeep

                  Comments about 3M Professional Grade Rubberized Undercoating, 16 oz:

                  I used this product for (Re)undercoating my Hot Rod. Must make sure underbody is clean & degreased for good adhesion. Sprays nice at any angle. Great coverage. Factory Finish Look! Fumes are heavy so make sure you have plenty of ventilation.

                  Comment on this review(earn points)

                  (48 of 99 customers found this review helpful)

                   
                  5.0

                  fantastic product

                  By 

                  from Rochester,NY

                  Verified Buyer
                  Level 2

                  Comments about 3M Professional Grade Rubberized Undercoating, 16 oz:

                  This stuff coats perfectly. It self levels itself to give an even finish.

                  Comment on this review(earn points)

                  (48 of 95 customers found this review helpful)

                   
                  3.0

                  A good product except....

                  By 

                  from Stuart

                  About Me Auto Enthusiast

                  Verified Buyer
                  Helpful Reviewer

                  Pros

                  • Big can

                  Cons

                  • Asphalt based

                  Best Uses

                  • Home Garage

                  Comments about 3M Professional Grade Rubberized Undercoating, 16 oz:

                  I'm surprised with today's technology that undercoating still contains asphalt. While drying, I found the odor quite strong. Make sure to wear protective gear and use with very good ventilation. I will use a low VOC product next time that's also ashpalt-free.

                  Comment on this review(earn points)

                  Displaying reviews 1-10

                  Back to top

                  Previous | Next »

                  Do you have questions about this product?(earn points for answers!)

                   

                  Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.

                  35 Questions | 39 Answers
                  Displaying questions 1-10Previous | Next »
                  • Q:

                    Can this be used on wood?
                    Asked on 6/19/2015 by Cyndi W.

                    1 answer

                    • CUSTOMER CARE

                      A:

                      Hi Cyndi, I'm glad to assist you! This 3M Professional Grade Rubberized Undercoating bonds to wood, however, it doesn't have any UV stabilizers and will therefore discolor. Also, if something (feet or deck furniture, etc.) rubs against the undercoating, it may leave marks.

                      Answered on 6/19/2015 by Solomon
                  • Q:

                    Will this product adhere to wood?
                    Asked on 6/17/2015 by Jennifer

                    1 answer

                    • CUSTOMER CARE

                      A:

                      Yes, Jennifer, the 3M Professional Grade Rubberized Undercoating, 16 Oz (Part No. 03584) adhere to the wood.

                      Answered on 6/17/2015 by Steve from AAP
                  • Q:

                    Does this product require any kind of pre-treatment (i.e. primer, etc.)?
                    Asked on 1/7/2015 by JB from United States

                    1 answer

                    • CUSTOMER CARE

                      A:

                      Good question JB! This product does not require any pre treatment. However, before applying this product remove all rust scale, oil and grease from surfaces to be coated and keep the surface clean and dry. It may be applied to bare or primed metal. If applying to composite plastic (SMC/FRP) as a sound deadening material, sand the composite plastic surface with a medium grade abrasive prior to applying under coating, this will increase adhesion. Shake can for at least 60 seconds after agitator ball moves freely and hold the can 10 - 12 inches from the surface and apply a uniform coat. You need to allow product to dry 3 - 5 minutes, then apply a second coat.

                      Answered on 1/8/2015 by Steve from AAP
                  • Q:

                    Can you get this off your clothes if accidental smudges get on them?
                    Asked on 11/5/2014 by Lori Ann from United States

                    1 answer

                    • CUSTOMER CARE

                      A:

                      Hi Lori, I could be of some help! You may have to try and presoak the affected area with laundry detergent, any sort of chemical solvent may discolor the fabric. If it does not come off from presoaking, it may never come off or may wear off over time.

                      Answered on 11/7/2014 by Solomon
                  • Q:

                    Can it be used for an under water application? Like a pond liner.
                    Asked on 10/7/2014 by Jason from Limerick pa

                    1 answer

                    • CUSTOMER CARE

                      A:

                      Hi Jason, this product cannot be used for an under water application.

                      Answered on 10/8/2014 by Steve from AAP
                  • Q:

                    IF APPLIED TO RAMP ON LANDSCAPE TRAILER, WILL IT GIVE BETTER TRACTION ON RAMP?
                    Asked on 9/16/2014 by RAA from VIRGINIA

                    1 answer

                    • CUSTOMER CARE

                      A:

                      I'm happy to help, RAA! This 3M Professional Grade Rubberized Undercoating (Part No. 03584) may not be the best option to provide better traction on your landscape trailer ramp. You may find that a roll-on or spray-on bedliner may provide not only better traction, it can also help better protect the ramps from damage.

                      Answered on 9/19/2014 by Heath, ASE Parts Specialist from AAP
                  • Q:

                    Can this product go on any clean painted surface? or do you need to sand the paint so it adheres?
                    Asked on 6/12/2014 by Josh

                    1 answer

                    • CUSTOMER CARE

                      A:

                      I'm happy to help, Josh! This 3M Professional Grade Rubberized Undercoating does not require you to sand the surface first. Rust scale and grease will need to be removed from the surfaces to be coated. It can be used over bare or painted metal.

                      Answered on 6/16/2014 by Heath, ASE Parts Specialist from AAP
                  • Q:

                    will this product seal a hole in a tarp?
                    Asked on 9/24/2013 by AJ

                    1 answer

                    • CUSTOMER CARE

                      A:

                      The 3M Professional Grade Rubberized Undercoating, 16 oz (Part No. 03584) is an easy to use black protective coating that does not run when applied, provides anti corrosive protection, sound deadening and insulation to cars, trucks and recreational vehicles. Specifications: Application Method: Automotive Undercoating, Color: Black, Compatible Surfaces: Under surface of vehicles, Container/Package Size: 16 oz, Container/Package Type: Aerosol Can, Rubberized: Yes, Shelf Life: 24 months, Sound Deadening: Yes. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

                      Answered on 9/24/2013 by Steve from AAP
                  • Q:

                    Can you export the product by air or by truck?
                    Asked on 4/10/2013 by maria from fort worth, tx

                    1 answer

                    • CUSTOMER CARE

                      A:

                      For any further assistance regarding the shipping information, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

                      Answered on 4/10/2013 by Steve from AAP
                  • Q:

                    About how many cans will it take to do an undercoating on a 1996 f-150?
                    Asked on 2/13/2013 by Kevin from Pa

                    1 answer

                    • CUSTOMER CARE

                      A:

                      This part 3M Professional Grade Rubberized Undercoating (16 oz.), Part No. 03584 is a black protective coating that does not run when applied, provides anti-corrosive protection, sound deadening and insulation to cars, trucks and recreational vehicles. You would be requiring around 4 cans for an undercoating on a 1996 Ford F-150.
                      For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

                      Answered on 2/14/2013 by Aaron from AAP
                  Displaying questions 1-10Previous | Next »

                  Do you have a question about this product? 

                  Create or view your online garage

                  Check out the specials in our monthly flyer

                   
                   
                  Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.