3/8" Drive Long Ball Hex Bit Socket - 4mm to 3/8" Drive Flex Socket Set mm

Patented bit holding system forces bit surface to opposing side for maximum bit retention - strength
Heat treated socket base for durability and service ability
Chrome socket; S2 and alloy steel bit

SuperKrome finish provides long life and maximum corrosion resistance
SureGrip lock provides safety
4 recess detents in socket drive square for quick attachment
Made in the U.S.A.
Lifetime warranty This locking extension is 25.5" in length and has a .69" diameter. 

SuperKrome finish provides long life and maximum corrosion resistance

SureGrip lock provides safety

4 recess detents in socket drive square for quick attachment

Made in the U.S.A.

Lifetime warranty This locking extension is 13.5" in length and has a .69" diameter.

Tools, Fluids & Garage > Hand Tools > Ratchets

Indexible to 11 positions for extreme accessibility
72 teeth ratchet mechanism provides tight swing
Strip proof indexing mechanism engages with 18 pins that snap into next available position
Push button set and release for ease of use
Made in U.S.A. The Armstrong indexible ratchet offers extreme access for the hardest to reach fasteners. Indexible to 11 positions it also features a 72 teeth precision engineered ratchet mechanism that provides a tight swing arc. Slim line design offers greater control and the push button operation for setting and releasing makes the ratchet easy to adjust and operate.

Twin hammer mechanism deliver maximum torque
Reverse torque: 500 ft./lbs.
Maximum loosening torque: 400 ft./lbs.
Working torque: 50-350 ft./lbs.
Assembled in the U.S.A. Power is plenty in this 3/8" drive impact wrench. Composite body provides lightweight design, with low noise output. Sound pressure level, dBA: 85 - silent power. Tuned exhaust efficient power to noise ratio. This is an excellent general purpose impact wrench for engine and transmission work.

Chrome moly steel, heat treated, short overall length

Corrosive resistant and laser engraved every 120 degrees

Improved access

SureGrip hex design drives the side of the fastener, not the corner

Made in the U.S.A.

Lifetime warranty This 3" extension has a ball retainer and a .81" diameter.

SuperKrome finish provides long life and maximum corrosion resistance

Through-hole design: simply pop the old bit out and insert a new replacement bit

Working angle up to 30 degrees

New bit holder design is 9 times stronger and helps prevent the bit from slipping out of the socket while working

Lifetime warranty This hex bit socket has a 5/16" hex shank and is 1.94" in length.

SuperKrome finish provides long life and maximum corrosion resistance
Through-hole design: simply pop the old bit out and insert a new replacement bit
Working angle up to 30 degrees
New bit holder design is 9 times stronger and helps prevent the bit from slipping out of the socket while working
Lifetime warranty This hex bit socket has a 1/4" hex shank and is 1.69" in length.

Used to loosen or tighten bolts and nuts that have hex heads

Product Features:

• Heat-treated socket base for durability and serviceability
• Bit-holding design forces bit surface to the opposite side for enhanced retention

Made with superior S2 Steel to meet or exceed torque specifications
Hundreds of applications
All bit sockets have a 2-piece design which gives 20% longer life than 1-piece design
Use 3/8" hex insert
Covered by OTC's Lifetime Marathon Warranty

Hex profiles are one of the most common fasteners found in the automotive, industrial, and agricultural markets today
Our hex bit sockets give service professionals a tool for application from bumper to bumper on millions of vehicles
Manufacturered with premium quality tool grade steel and  as two-piece construction for even stronger performance

Patented bit holding system forces bit surface to opposing side for maximum retention
Chrome sockets; heat treated for durability and service ability
S2 and Alloy steel bits

Patented bit holding system forces bit surface to opposing side for maximum retention
Chrome socket; heat treated for durability and service ability
S2 and Alloy steel bit

Hex profiles are one of the most common fasteners found in the automotive, industrial, and agricultural markets today
Our hex bit sockets give service professionals a tool for application from bumper to bumper on millions of vehicles
Manufacturered with premium quality tool grade steel and as two-piece construction for even stronger performance

SuperKrome finish provides long life and maximum corrosion resistance

Through-hole design: simply pop the old bit out and insert a new replacement bit

Working angle up to 30 degrees

New bit holder design is 9 times stronger and helps prevent the bit from slipping out of the socket while working

Lifetime warranty This hex bit socket has a 1/4" hex shank and is 1.69" in length.

CP's anti-slip head design which virtually eliminates slippage while reducing the potential for heat build-up, even in long run downs

Compact, yet packed with power and speed

160 ft./lbs, of maximum torque

Two-piece housing for easy service

Comfortable ergonomic handle design

Free speed: 9,500 RPM Our newest 3/8" drive model combines power and economy for general service applications. It provides adjustable power output in forward and reverse with handle exhaust to direct air away from the operator and the work. Average air consumption: 3.0 cfm; sound dBA: 80.6/93.6; Air inlet NPTF: 1/4"; minimum hose size: 3/8"; weight: 2.89 lbs.; length: 6.125".

Patented slide rail feature allows for easy positioning of sockets Internal slide eliminates interference Ball bearing retention on drive tang keeps sockets secure Includes 14 rails clips with the ability to add on as needed Available in red, blue, or green for hi Viz differentiation of your SAE, Metric, and Torx sockets

Tools, Fluids & Garage > Hand Tools > Sockets

Made of high quality steel (chrome-molybdenum)
Engineered specifically for use with impact tools, using the most up to date industrial specifications
Made to transfer the pressure from the thinnest part of the socket wall toward the thicker section, resulting in increased strength
Lifetime warranty This impact, socket features high torque drive, which limits the amount of wear on the corners of the fastener and the socket. It also improves the strength of the socket, transfers increased torque to the fastener and allows easier access to tight areas. Each socket is thoroughly made with the correct balance of strength and durability and is tested to the highest specifications to deliver outstanding performance at the most competitive cost.

Made of high quality steel (chrome-molybdenum)
Engineered specifically for use with impact tools, using the most up to date industrial specifications
Made to transfer the pressure from the thinnest part of the socket wall toward the thicker section, resulting in increased strength
Lifetime warranty This impact, socket features high torque drive, which limits the amount of wear on the corners of the fastener and the socket. It also improves the strength of the socket, transfers increased torque to the fastener and allows easier access to tight areas. Each socket is thoroughly made with the correct balance of strength and durability and is tested to the highest specifications to deliver outstanding performance at the most competitive cost.

Made of high quality steel (chrome-molybdenum)
Engineered specifically for use with impact tools, using the most up to date industrial specifications
Made to transfer the pressure from the thinnest part of the socket wall toward the thicker section, resulting in increased strength
Lifetime warranty This impact, socket features high torque drive, which limits the amount of wear on the corners of the fastener and the socket. It also improves the strength of the socket, transfers increased torque to the fastener and allows easier access to tight areas. Each socket is thoroughly made with the correct balance of strength and durability and is tested to the highest specifications to deliver outstanding performance at the most competitive cost.

Made of high quality steel (chrome-molybdenum)
Engineered specifically for use with impact tools, using the most up to date industrial specifications
Made to transfer the pressure from the thinnest part of the socket wall toward the thicker section, resulting in increased strength
Lifetime warranty This impact, socket features high torque drive, which limits the amount of wear on the corners of the fastener and the socket. It also improves the strength of the socket, transfers increased torque to the fastener and allows easier access to tight areas. Each socket is thoroughly made with the correct balance of strength and durability and is tested to the highest specifications to deliver outstanding performance at the most competitive cost.

Made of high quality steel (chrome-molybdenum)
Engineered specifically for use with impact tools, using the most up to date industrial specifications
Made to transfer the pressure from the thinnest part of the socket wall toward the thicker section, resulting in increased strength
Lifetime warranty This impact, socket features high torque drive, which limits the amount of wear on the corners of the fastener and the socket. It also improves the strength of the socket, transfers increased torque to the fastener and allows easier access to tight areas. Each socket is thoroughly made with the correct balance of strength and durability and is tested to the highest specifications to deliver outstanding performance at the most competitive cost.

SuperKrome finish provides long life and maximum corrosion resistance
Through-hole design: simply pop the old bit out and insert a new replacement bit
Working angle up to 30 degrees
New Bit Holder Design is 9 times stronger and helps prevent the bit from slipping out of the socket while working
Lifetime Warranty Made in the U.S.A. Ball hex bit sockets allow a working angle up to 30 degrees to provide improved access to hard-to-reach fasteners. Bit sockets feature SK's high polish SuperKrome finish, which provides for long life and maximum corrosion resistance. Through-hole design makes it easier to replace worn or broken bits: simply pop the old bit out and insert a new replacement bit. The new bit holder design is 9 times stronger and helps prevent the bit from slipping out of the socket while working. Bits are manufactured to rigid standards using high strength S2 steel.

Improved access
Safe
Easy to use
Made in the U.S.A.
Lifetime warranty This flexible extension has a .68" diameter and is 8" in length.

Tools, Fluids & Garage > Hand Tools > Socket Sets

Tools, Fluids & Garage > Hand Tools > Socket Sets