4-1/2"X1/4" 5/8"-11 hub to 4 Piece Raised Panel SAE Combination Wrench Set

Tools, Fluids & Garage > Specialty Tools > Cutting & Drilling Tools

Firepower flap discs durability over the conventional fibre disc results in reduction of both labor and material costs
Designed to wear away evenly and present a constantly fresh work surface
No backing pad required - comes with fiberglass backing plate with higher RPM rating than resin fiber discs
No loading up, as new sharp abrasive particles are constantly exposed
Maximum RPM: 13,300 Cut and finish at the same time with consistent finish - for coarse and intermediate grinding and machining of welds, deburring, rust removal, snagging, removal of paint, etc. This means fewer change-overs. Suitable for almost all materials: ferrous and non-ferrous metals, wood, leather, glass, marble and plastics.

Tools, Fluids & Garage > Shop Equipment > Welding Tools & Accessories

71111-piece English or Metric Socket Organizer Our socket organizer is designed to hold a standard 11-piece English or metric set with 1 additional hole for extensions or universal joints. Accommodates 7/32 thru 7/8 SAE and/or 5.5 thru 22mm. Neon Blue

Tools, Fluids & Garage > Specialty Tools > Cutting & Drilling Tools

DC Sports 4-into-1 systems features a unique trapezoidal design that is proven to efficiently expedite exhaust gas flow by virtually eliminating turbulence. This design also improves ground clearance by allowing us to offset the top and bottom header piping.

DC Sports 4-into-1 systems features a unique trapezoidal design that is proven to efficiently expedite exhaust gas flow by virtually eliminating turbulence. This design also improves ground clearance by allowing us to offset the top and bottom header piping.

DC Sports 4-into-1 systems features a unique trapezoidal design that is proven to efficiently expedite exhaust gas flow by virtually eliminating turbulence. This design also improves ground clearance by allowing us to offset the top and bottom header piping.

DC Sports 4-into-1 systems features a unique trapezoidal design that is proven to efficiently expedite exhaust gas flow by virtually eliminating turbulence. This design also improves ground clearance by allowing us to offset the top and bottom header piping.

DC Sports 4-into-1 systems features a unique trapezoidal design that is proven to efficiently expedite exhaust gas flow by virtually eliminating turbulence. This design also improves ground clearance by allowing us to offset the top and bottom header piping.

Use open spacers where more plenum volume or more carb-to-plenum floor distance is required. 4-hole spacers enhance low-rpm torque and throttle response and dampen reversion effects on the carb. The superior heat insulating properties of wood fiber laminate are ideal for reducing heat transfer to the carb.

Product Features:

• Provides Superior Heat Insulation
• Ideal for Reducing Heat Transfer to Carburetor
• Use Spacer to Enhance Low-RPM Torque
• Use to Enhance Throttle Response
• Dampens Reversion Effects on the Carburetor

Use open spacers where more plenum volume or more carb-to-plenum floor distance is required. 4-hole spacers enhance low-rpm torque and throttle response and dampen reversion effects on the carb. The superior heat insulating properties of wood fiber laminate are ideal for reducing heat transfer to the carb.

Product Features:

• Provides Superior Heat Insulation
• Ideal for Reducing Heat Transfer to Carburetor
• More Plenum Volume
• More Carb-To-Plenum Floor Distance

Use open spacers where more plenum volume or more carb-to-plenum floor distance is required. 4-hole spacers enhance low-rpm torque and throttle response and dampen reversion effects on the carb. The superior heat insulating properties of wood fiber laminate are ideal for reducing heat transfer to the carb.

Product Features:

• Use Spacer to Enhance Low-RPM Torque
• Use to Enhance Throttle Response
• Dampens Reversion Effects on the Carburetor

Use open spacers where more plenum volume or more carb-to-plenum floor distance is required. 4-hole spacers enhance low-rpm torque and throttle response and dampen reversion effects on the carb. The superior heat insulating properties of wood fiber laminate are ideal for reducing heat transfer to the carb.

Product Features:

• Use Spacer to Enhance Low-RPM Torque
• Use to Enhance Throttle Response
• Dampens Reversion Effects on the Carburetor

Slim head design for access applications
Additional padding on tips of handles for precision use
Rounded inside edges for comfort

Four independent, fully-automatic charging channels that control voltage and current up to 20 Amps per circuit
Four sets of LED indicators showing charging status by battery
Four sets of detachable 6 foot leads with 300 Amp heavy duty clamps
Patented diagnostics to indicate weak or defective batteries
Designed to charge Gel, AGM, Sealed or Standard Flooded batteries including Spiral Cell, Orbital, or Optima batteries
 This unit is unique to the automotive market. It has the capability of charging all types of batteries at the same time and do so automatically. It can charge one to four different types of batteries at the same time and is made in the USA.

Accessories, Body & Wipers > Auto Body Parts > Trailer & Towing

Wrench features uniquely designed lugs for maximum strength

Use with 1/2" square drive

Outer diameter: 2.60"; Inner diameter: 2.23"

Length: 2.94"

Inside depth: 2.375"This 6-lug wrench removes spindle nuts on 4-wheel drive vehicles.  It's used for the following applications: 1973-1981 GM 3/4 and 1 Ton 4WD trucks; 1978-1984 Ford F250-350 Trucks; 1984-1992 Ranger, Bronco with manual hubs; 1990-1993 Dodge Trucks with Dana 44.

Top-quality steel and strengthened centers make Ken-Tool wrenches tough and long
All our lug wrenches have extra deep sockets to fit most standard lug nuts
Fully welded centers which stand up to every day use
Socket sizes: 3/4", 13/16", 7/8", 117mm
Made in the U.S.A.

This premium quality ram is designed for long, trouble-free service
Features a 4" stroke and special piston rod that permits use with the snap-together components of OTC Stinger's new collision repair sets
Backed by a two year warranty

Lift capacity: 8,000 lbs.
Hydraulic safety bypass valve
User can bleed the unit
Powder coating
ASME/PALD certified Includes: hand pump, hose, cylinder ram, spreader ram, rubber head, rubber faced flat base, ram toe, plunger toe, 1/2 ton wedge head, 90º V-base, serrated saddle, male thread adapter, and assorted extension tubes: 19-1/2", 16-1/2", 8-1/2" and 3". Packaged in a blow molded case. Shipping weight: 50 lbs.

Ductile iron base for added strength
Electrostatic paint for rust prevention
Heat treated extension screw increases low height to get full use of ram travel
Hydraulic bypass prevents over-travel of ram
Two piece slip fit handle for controlling the release valve and pumping the jack Power lift: 5.5"; closed height: 7.75"; raised height: 15.25"; add. screw adj.: 2.75"; base dimension: 3.6" x 4".

Lift capacity: 8,000 lbs.; ASME certified
Minimum height: 7.75"; maximum height: 15.25"; hydraulic lift: 7.5", additional screw adjustment: 2.75"
Electrostatic painted to prevent corrosion
Heat-treated, large diameter extension screw
Steel base: 3.6" x 4"Shipping weight: 7.5 lbs.

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Factory Air.

Product Features:

• Allows for different size wheels
• Long life and reliability
• Magnetic size and properties compare or exceed OEM
• Matches the OE performance
• Meets or exceeds OE design and performance
• Motor RPM equivalent to or exceeds OEM motor
• Windings meet or exceed OEM specifications

42470-2Rebuild Kit Includes: Cap, Inner body, Assembly, Clip Spring, & Grease for Ratchet #'s: 401704247042477

Features and Benefits:
Made of chrome vanadium steel
Double dipped rubber handle for comfort and grip
Includes 6 in. slip joint pliers
7 in. diagonal cutter pliers
7-1/2 in. needle nose pliers
10 in. groove joint pliers

Eliminates the problem of reaching around obstructions

Features 2 double reversing 5 degree ratcheting heads

Each box end features a reversing lever on both sides of the wrench that allows direction changes from either side

Allows the fastener to be moved as little as 5 degrees in both directions without removing the wrench Sizes include: 3/8" x 7/16", 1/2" x 9/16", 5/8" x 11/16", and 3/4" x 7/8"

Full polish, fine toothed ratcheting wrenches with two box ends Includes sizes: 5/16" x 3/8"; 7/16" x 1/2"; 9/16" x 5/8"; 11/16" x 3/4".

Tighten or loosen quickly with a flip of the reversing lever

15 degree offset provides access and knuckle clearance

Surface Drive open end design - eliminates fastener rounding

Mirror chrome finish

Includes wrench rack that will hold 16 pieces Completer set for 9620 GearWrench Reversible Ratcheting Wrench Set. This 4 piece set includes sizes: 21mm, 22mm, 24mm, and 25mm. 16 piece rack provides extra storage for existing 8mm - 19mm GearWrench sizes.

High density, dropped forged steel for strength and comfort

Raised panel design

Comes with sturdy metal clip for storage

Wrenches guaranteed

Available individually Basic doesn’t have to be ordinary. Bringing you an exciting range of resources, Sunex hand tools put a new spin on handling fasteners. With the design and strength to work in most situations, these tools will be right with you all of the way.  There's no sacrifice, you have strength and comfort!  This 4 piece set includes the following sizes: 2-1/8", 2-1/4", 2-3/8", and 2-1/2".