6"X3/4" - 80 GRIT to 6" Bench Grinder with Light

• One Pair 6" X 9" Four-Way Quadaxial Speaker Systems
• Power Handling: 200 Watts RMS / 400 Watts Max
• Non-fatiguing Butyl Rubber Surround
• 1.25" High Temperature ASV Voice Coil
• Standard 6" X 9" Size Fits OEM Locations
• Blue Poly Injection Cone
• 50 Oz Magnet Structure
• 1-1/2" Film Dome Midrange
• 1" Film Dome Tweeter
• 3/4" Piezo Tweeter

• Pair 6" x 9" Four Way Speakers
• Injected Poly Cones
• Non-Fatiguing Butyl Rubber Surround
• 70 Oz Magnet Structure
• High Power Voice Coil
• 3" Polymer Midrange
• 2" Dome Tweeter
• 1/2" Ceramic Super Tweeter
• 800 Watts Power
• Frequency Response: 35Hz-25KHz

• Standard 6"x9" Size Fits OEM Locations
• Yellow Color Poly Injected Cone
• Non-Fatiguing Butyl Rubber Surround
• 2" Polymer Cone Midrange
• 0.5" Neodymium Dome Tweeter
• High Temperature Aluminum Voice Coil
• Strong Capacitor for Excellent Performance
• Yellow Coated Steel Basket
• 100 oz. Magnet Structure
• Rubber Magnet Cover

Abrasive Mineral type: Aluminum Oxide

FEPA grade: P320

• Solid Flush Rivet for better access and tighter tolerance
• Cross-over wire cutting jaws
• Curved back handles for added leverage and less slip

• Prevents sliding
• Heat-treated for added strength and durability

Manufactured from chrome vanadium steel with chrome finish

Ergonomic vinyl handle for user comfort

Easy to handle, compact and lightweight, providing best power to weight ratio in its class

0.3 hp oil free motor delivers the power you need to get the job done while keeping the work area free of contaminants

Triple balance design provides balance with low vibration for superior control

Adjustable speed regulator with safety shut off for maximum control The 6" high quality sander with 0.3 HP motor has the best power to weight ratio in its class. It's compact and lightweight, which means better productivity with less fatigue.  It features a 5mm orbit for standard finishing operations with low noise and vibration for superior control.  Free speed: 12,000 RPM; average air consumption: 8.3 cfm; air inlet thread: 1/4" NPTF; minimum hose size: 3/8"; sound dBA: 76; weight: 1.7 lbs.

• LED technology for energy-efficient, dependable performance
• Sonically sealed, waterproof lens and housing for durability

• LED technology for energy-efficient, dependable performance
• Sonically sealed, waterproof lens and housing for durability

Perfectly matted cutter, heat treated to hold its edge

Polished high carbon drop forged steel

CHANNELLOCK BLUE comfort grips

Length: 6"-150mm with side cutter Channel lock uses high carbon C1080 steel for superior performance on the job, and an electronic coating for ultimate rust prevention. Most of the manufactures use two sharp edges which can eventually become misaligned, losing there cutting effectiveness over time.  Channel lock's knife and anvil ensure proper cutting edge alignment resulting in a clean cut every time!  Also this is to ensure perfect mating and superior cutting edge life.  The laser heat-treated cutting edges last 3 times longer!  Not only made for durability but for comfort as well, with the blue grip handles.

3/32" (2-1/2mm) stroke finish

Super lightweight and compact for minimum operator fatigue

Orbital action for final swirl free finish

Built in speed regulator Ergonomic design for long term operation. Compact and lightweight motor. Noise reduction design with low vibration.

5mm (3/16") stroke finish

Super lightweight: 1.5 lbs.

Sealed bearings for extended life

Compact for minimum operator fatigue Orbital action assures final swirl free finish. Built in speed regulator. Compact and lightweight motor for long term operation. Composite lever housing and rotors. Special design reduces sound level. Low vibration. Includes #4506 - 6" pad with velcro. Specs:

Pad Size: 6"

Free Speed: 10,000rpm

Overall Length: 6" (15.24cm)

Net Weight: 1.5lbs. (.68kg)

Spindle Thread Size: 5/16" x 24

Air Inlet Thread NPT: 1/4"

Air Hose I.D. Size: 3/8" (10mm)

Avg. Air Consumption: 5.5cfm

Air Pressure: 90psi

Ideal when it is impractical to carry a full set of wrenches

Cobalt based coating for rust and corrosion protection

Made in the U.S.A.

Lifetime warranty This adjustable wrench is 6.25" long, and has a jaw capacity of .75".

Convenient belt tension lever for quick speed transition

Table rotates 360 degrees and pivots from 0 degrees to 45 degrees on each side with indicator to facilitate setting

UL and CSA listed Power source: 115V Speeds range: 200-3850 RPM Max. spindle stroke: 3-1/8" Diameter of column: 2-3/4" Table diameter: 11-1/2" Height: 61-13/16" Shipping weight: 146 lbs.