90° Compression A/C Fitting to 9/16-18 Wheel Bolt - 3/4 Inch Hex, 1-1/8 Inch Length

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Factory Air.

Product Features:

• Beadlock style connector
• Contains gaskets, o-rings, or seals to properly replace the product
• Precision machined
• Meets or exceeds OE specifications

Composite body

Collet size: 1/4"

Free speed: 20,000 RPM

Comes in a blow molded case 1 Year Warranty on material and workmanship. Kit Includes:

1-1/4" 90° angle die grinder with safety lever

5-2" surface prep pads

5-3" surface prep pads

1- 2" Roll Lock holder

1- 3" Roll Lock holder

1- small spanner wrench

1- large spanner wrench

1- air fitting

1- 1/8" Collet

10 piece stone assortment Specifications:

Collet size: 1/4"

Free speed: 20,000 RPM

Overall length: 5-3/4"

Net weight: 1-1/8 lbs. (tool only)

Motor: 1/3 HP

Air inlet thread: 1/4" NPT

Air hose I.D. size: 3/8"

Avg. air consumption: 3cfm

Noise level: 88 dBA @90 PSI

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Factory Air.

Product Features:

• Contains gaskets, o-rings, or seals to properly replace the product
• Steel/aluminum construction
• Precision machined
• Meets or exceeds OE specifications

This swivel elbow offers dependable operation in extreme conditions.

Convertible from internal rings to external rings
Made in the U.S.A. These retaining ring pliers have a .038" tip size.

Dorman offers a comprehensive line of Air Brake Fittings for many different applications. All our Air Brake Fittings are constructed from high-quality materials for long-lasting durability.

Product Features:

• Available in many different styles including inserts, connectors, and elbows
• A variety of sizes available
• Also suitable for a broad range of industrial and commercial uses
• Durable brass design

Sharp, small diameter probes slide along the wire into connector to back of circuit
Bent at 90 degrees with longer, more durable pins
No need to disconnect connector and terminal
Kit includes 20 pin-type back probes in 5 different colors
Demanded by technicians

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco's Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco's Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco's Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco's Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco's Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684

90 degree angle head for easy accessibility

Insulated grip for greater comfort

Adjustable speed regulator for precise control

Lock off throttle to prevent accidental start up

Excellent for blending, smoothing, porting, and deburring in confined areas Fine grinding and detail work is easily accomplished with this 90 degree  die grinder.  Also works great with 3M brand Scotch-Brite disks for removing old gaskets and old paint. Collet size: 1/4"; free speed: 22,000 RPM; average air consumption: 5.3 cfm; air inlet thread: 1/4" NPTF; minimum hose size: 3/8"; sound dBA: 92; length: 6.19"; weight: 1.13 lb.

90 degree angle solves problem of contacting so-called "inaccessible" grease fittings
Design eliminates need to remove from "deep dish" wheels for lubrication of the tie rod ends and ball joints
Used to service cars, trucks, machines and farm equipment

Remarkably durable against corrosion and rust, Dorman’s Air Conditioning Line Connectors make leaks a distant memory. Return air conditioning to original operating temperatures and prevent future breakdowns.

Product Features:

• Save time and money by repairing only the damaged section, not the entire A/C line assembly
• Easy to install
• Sturdy aluminum construction
• Also available as part of Dorman’s A/C Line Repair Kit

Fits 3/16", 1/4", 5/6", 3/8" OD

Dorman manufactures a comprehensive selection of Vacuum and Emissions Fittings for almost any automotive Vacuum job. We also offer Vacuum Tubing, sold separately.

Product Features:

• Available in a variety of shapes, including Straight, T-Shape, Y-Shape, F-Shape, and L-Shape
• Constructed from durable plastic or heat-resistant PVC Vinyl for a long service life
• Conveniently packaged in many different sizes, assortments and quantities
• Depending on the application, available in either black or white

Ideal for steel, wood and plastic Precision crafted from premium high speed steel Hardened and tempered for long life and high performance
118 degree point for general purpose drilling application Drill Bit Stats: Fractional jobber length
Diameter: 9/64"
Over all length: 2-7/8"
Flute length: 1-34"

254401/4" Drive 9/32" Straight Slot Bit. All bits are individually skin-packed.

Flare nut wrench gives additional turning angles for improved access in tighter spaces

Enhanced open end design with Surface Drive Technology that prevents fastener from rounding

Size stamped on both sides for ease in identification

Fits 9/16" spark plugs used on the Ford F-150 with the Triton V8 engine.

Product Features:

• Magnetic insert holds plugs for removal and installation
• 360° swivel action
• 6-point, 3/8" drive

SuperKrome finish provides long life and maximum corrosion resistance

SureGrip hex design drives the side of the fastener, not the corner

Box ends are offset for improved hand clearance

Made in the U.S.A.

Lifetime warranty This box end wrench is 10.19" in length.

The stubby version of our popular combination wrenches
Enhanced open end design with Surface Drive Plus Technology that prevents fastener rounding
Size stamped on both sides for ease in identification

Reversing mechanism with the flip of a lever
15 degree offset offers increased clearance
SurfaceDrive box end virtually eliminates the rounding of fasteners
Fully hardened, mirror finish This unique open end wrench has a ratchet in the boxed end. Low clearance is able to fit in tight places that a regular ratchet can't.

The extra length gives you added leverage and accessibility
Fits set screws: 1" and 1-1/8"
Fits HH cap screws: 3/4"
Meets ANSI specifications Today’s widespread use of Allen head cap screws make a set of these wrenches a mechanic’s necessity.

High polish chrome finish and fully hardened forging for optimum performance
Ergonomically designed beam for comfort and leverage
Uses only 5º of swing for tight access performance

Suregrip hex design drives the side of the fastener, not the corner
Open end is angled 15 degrees for greater access
Box end design features a 15 degrees offset head for clearance
Made in the U.S.A.
Lifetime warranty This combination wrench has a .88" diameter and is 6.72" in length.

When it comes to your wheels, don’t take chances. Dorman’s Wheel Studs are produced to strict engineering quality standards. Our engineers design these parts with tight tolerance on specific part characteristics to ensure proper fit and function, this design provides assurance your wheels will be tight every time they are removed and installed.

Product Features:

• Direct replacement for a proper fit every time
• Corrosion resistant
• Double-ended studs as well as serrated bolts, and wheel bolts available
• Over-length and under-length studs available for convenience and ease of installation

When it comes to your wheels, don’t take chances. Dorman’s Wheel Studs are produced to strict engineering quality standards. Our engineers design these parts with tight tolerance on specific part characteristics to ensure proper fit and function, this design provides assurance your wheels will be tight every time they are removed and installed.

Product Features:

• Direct replacement for a proper fit every time
• Corrosion resistant
• Double-ended studs as well as serrated bolts, and wheel bolts available
• Over-length and under-length studs available for convenience and ease of installation

When it comes to your wheels, don’t take chances. Dorman’s Wheel Studs are produced to strict engineering quality standards. Our engineers design these parts with tight tolerance on specific part characteristics to ensure proper fit and function, this design provides assurance your wheels will be tight every time they are removed and installed.

Product Features:

• Direct replacement for a proper fit every time
• Corrosion resistant
• Double-ended studs as well as serrated bolts, and wheel bolts available
• Over-length and under-length studs available for convenience and ease of installation