Vacuum Power Brake Booster without Master Cylinder - Remanufactured to Front Gas Strut Sold Individually

• 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
• Exclusive rust-prohibitive finishing process extends unit life.
• Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
• New mounting nuts and washers ensure proper, hassle-free installation.
• All units are 100% vacuum tested to ensure reliable performance.

• Each unit is 100% computer tested at 3 points in the remanufacturing process to ensure great performance.
• Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
• Motor magnets are 100% recharged for superior performance and reliability.

• All Aluminized/Stainless Steel
• Deep Throaty Powerful Sound
• Aerodynamically Design
• 23 percent More Flow Than Others
• More Horsepower And Torque
• Sound Absorption Chamber
• Stepped Acceleration Chamber

• Improved design provides longer life and enhanced heat resistance

• Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
• Lock ring included with each tank to reduce installation time and to ensure a complete repair
• Made with corrosion resistant, OE approved, Ni Terne steel for durability
• Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
• Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
• Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
• Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
• Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation

• Meets or exceeds OE design and performance
• Magnetic size and properties compare or exceed OEM
• Windings meet or exceed OEM specifications
• Motor RPM equivalent to or exceeds OEM motor

• Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
• Exceeds ISO manufacturing guidelines. (International Organization for Standardization)
• OE vane configuration to dissipate heat, increasing pad life.
• Proper harmonic design helps to reduce brake noise.
• Non-directional finish for less break-in time and reduced brake noise.
• Ready for immediate "out-of-the-box" installation (after cleaning)
  
  Advance Auto Parts Rotor Tips:

  • Recommend using Wearever Brake Clean to remove residual manufacturing oils prior to installation.
  • Always use a torque wrench to tighten wheel bolts to the manufacturers'' specifications to prevent pedal pulsation.
  • Always replace rotors in pairs to improve stopping power.

• Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
• Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
• FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
• Every part for the repair procedure is included in the kit unless otherwise noted

• Size 0-80
• High Speed Steel
• Plug

• Full front end coverage protects all painted surfaces
• Compliments today's aerodynamic shaped vehicles
• Installs easily with no drilling or tools
• Custom fit exactly to your vehicle

• Clear and Bright 7" X 16" OEM Size double strength glass lens
• Fits most OEM and aftermarket West Coast mirror applications
• Convenient and affordable solution for replacing broken West Coast style mirror heads and lenses
• Available in a variety of other styles and finishes
• Also available in heated models (Ribbed-Back designs only)

The KYB Strut-Plus means "OE-Plus" for your vehicle: The KYB Strut-Plus is a ready to install assembly that doesn’t require a special spring compressor to transfer parts. It’s OE-Plus because it’s designed to "restore" designed performance. That‘s better than using an OE replacement part because OE parts are designed for new vehicles, not used vehicles. The Strut-Plus goal is to help restore the vehicle’s Tire Control which affects vehicle stability, stopping distance, lane change responsiveness and overall handling. Every component in a complete strut assembly is critical to its overall performance: That’s why the KYB Strut-Plus only includes the highest OE or better components. At the heart of Strut-Plus is the Excel-G Gas Strut which is built on the same KYB OE assembly lines and is calibrated to compensate for wear caused by vehicle age & miles driven. Where applicable, the KYB Strut-Plus also includes a new coil spring, mount, insulator, bearing plate and attaching parts. The KYB Strut-Plus comes pre-assembled, saves time on installation, eliminates assembly errors and includes all necessary components to get the job done right; the first time.

Product Features:

• Where applicable: An improved, new coil spring that resists metal fatigue as much as 600% more than competitors and uses baked-on, powder coated paint to reduce rust & corrosion
• Where applicable: Includes hard to find, OE quality bearing plates and insulators
• Where applicable: A protective boot and bumper

Walker has been a driving force of innovation over the past century. The brand's history of innovative engineering includes such "firsts" as the louvered-tube muffler, stainless steel muffler, aluminized exhaust products, and chambered-tube mufflers. These advantages continue today in virtually every premium Walker exhaust and emission control component. For Walker, innovation drives performance and satisfied customers.

• The Intermotor brand has built its reputation by engineering and distributing a full line of genuine import parts - parts that are unrivalled for quality, original look, fit, form & function, as well as coverage.
• High quality composite housings protect against harsh temperatures and severe under hood conditions
• Featuring brass or copper contacts where specified for extended wear
• All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which assures that every part is the right part for the right vehicle.
• BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
• Warranty: 3 years/36,000 miles

• Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
• Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
• FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
• Every part for the repair procedure is included in the kit unless otherwise noted

• Full front end coverage protects all painted surfaces
• Compliments today's aerodynamic shaped vehicles
• Installs easily with no drilling or tools
• Custom fit exactly to your vehicle

• Original Equipment Quality Parts
• Made in Korea
• Manufactured by ISO-14000, QS-9000, or ISO/TS-16949 certified suppliers

• High Performance Handling and Aggressive Good Looks
• Lower Center of Gravity
• Stop Quicker, Corner Faster and get Better MPG!
• Progressive Spring Design for Excellent Ride Quality

Ride Comfort is important, but restoring a vehicle’s Ride Control; stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks & Struts are designed for the most important performance purpose: Restore the vehicle’s original capabilities. KYB is the world’s largest supplier of shocks and struts to new vehicle manufacturers. The Excel-G is made on the same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That earned Excel-G this classification: OEA (Original Equipment for the Aftermarket ). The KYB Excel-G is a Nitrogen gas-charged twin-tube design that includes every quality component that our global OEM products include.

Product Features:

• A seamless working cylinder vs. welded seams provides the best sealing surface throughout the entire piston stroke
• Precision multi-stage hydraulic valves that reduces fluid travel to minimize aeration and are calibrated the way OE intended the vehicle to perform
• Triple chrome-plated piston rod and multi-lip oil seals that reduce wear
• Solid, seamless mounting eye rings and bolt bushings that can’t separate and become noisy
• Chemically bonded insulator mounting bushings that won’t slip out
• A Teflon coated or phenolic piston band that reduces friction and provides a positive cylinder seal
• Specially formulated hydraulic fluid with multi-range viscosity for any weather climate