Rear Wheel Seal to 1" Drive 8 Point Fractional Impact Socket – 2-3/16”

• Cardone Select Engineered (CSE) Technology ensures that all master cylinders meet or exceed O.E. form, fit and function.
• Life-cycle testing ensures that every master cylinder exceeds S.A.E. stroke requirements.
• All cylinder bores are micro-finished to precise specifications to dramatically reduce wear and promote long service life.
• Seals are temperature-cycled from -30°F to +220°F to ensure leak-free, reliable performance under harsh under-hood conditions.
• EPDM seals and O-rings meet O.E. quality standards to ensure reliable, leak-free performance.
• Rubber components are tested to comply with stringent S.A.E. specifications.
• Aluminum castings are designed to precision tolerances to ensure like-new performance.
• Aluminum castings are designed to precision tolerances to ensure like-new performance.
• Mounting components are included with every model for easy installation.

• Wrinkle-Free
• No Crimping
• No Crimping

• Legal for on-road use
• OE quality
• Lights dim over time
• Replace lights in pairs

• Ultra High Power Spark Plug Replacement
• Over 1 Million Watts Of Patented Ignition Power
• Creates Precise Timing And Ignition
• Fast Growing Flame Kernel
• Improved Performance/Fuel Economy/Emissions
• Iridium Tip Produces More Complete Combustion
• OE Replacement For Iridium Tipped Spark Plugs
• Lifetime Warranty

• Each unit is 100% computer tested at 3 points in the remanufacturing process to ensure great performance.
• Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
• Improved over O.E. - Gears are redesigned with a stronger, less brittle material than O.E. to prevent premature wear, striping and breakage, thus extending the performance life.
• Motor magnets are 100% recharged for superior performance and reliability.
• New high-quality gaskets are used in every window lift unit to prevent water entry, thus eliminating failure modes related to water penetration.

• Original Equipment Replacement Wires / Complete Ignition Wire Set - 7mm
• DENSO First Time Fit ignition wire sets are identical in form, fit, color, and performance to the factory-installed wire sets
• Every part the wire set's construction meets or exceeds OE/OES specifications
• Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
• Identical OE end caps are designed to "click" in place for a secure fit, allowing the installer to "feel and hear" that a solid connection has been made, even when the connection is in a difficult-to-see location
• Through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation

• For Professional Cylinder Head Porter
• 72cc Chamber Size
• As-Cast Casting Has Small Ports And Chambers
• Max Valve Size is 2.11 Int and 1.66 Exh
• 14-Degree Valve Angle
• Enough Wall Thickness For CNC Machining
• Seats and Manganese-Bronze Guides Included

• Comes with reservoir cap
• Level sensor included (where applicable)
• Direct replacement for a proper fit every time
• Quality tested to ensure trouble-free installation and performance

• Problem Solver® powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.
• MOOG® engineered steel composition results in a stronger component.
• Full ball metal stud provides 360 degrees of smooth, consistent, rotational movement resulting in more responsive steering.
• An enlarged ball joint receptacle in the lower control arm can cause a loose ball joint fit. MOOG® Problem Solver® design includes an oversized housing for a more secure fit.
• Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear.

• Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
• Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
• FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
• Every part for the repair procedure is included in the kit unless otherwise noted

• Cover Rolls Up In Seconds To Allow Complete Access
• High Quality; Tear-Resistant Fabric
• Dual Automatic Latches Make It The Most Secure Cover
• Easy Adjustment Latches Provide Tight Fit
• Pre-Assembled Kits and Easy To Use Clamps
• Assure A No Drill Installation In Under 20 Minutes
• Includes Adapter Kit For Use On Cargo Mgmt Systems
• Limited Lifetime Warranty

• Powers three 12 Volt Electronic Items
• Two Piece Unit Construction with Functional Ashtray
• Fits Securely in Most Cup holders
• Three Top Mount Female Cigarette Lighter Ports
• Single Corded Male Cigarette Lighter Power Source
• Input 12~24 Volt DC

• 99.9% efficiency for increased dirt removal
• High-capacity design holds more dirt
• Enhanced burst resistance strength
• For use with synthetic or conventional oil

In North America, Bosal designs, develops, and manufactures original equipment exhaust systems for carmakers such as GM and Ford. Bosal supplies OE service products to many import / transplant carmakers including VW, Honda, Volvo, Subaru, and Mazda. Bosal also develops high performance exhaust for OEM port of entry and dealer programs.

Bosal pioneered the manufacture of one-piece, direct-fit replacement exhaust systems more than twenty-five years ago. Today, Bosal remains the leader in direct-fit exhaust systems for import vehicles, and has expanded their program to include direct-fit catalytic converters for both the import and domestic aftermarket. Included in the catalytic converter program is their new line of Bosal Super-Cats and our most recent addition - Bosal's line of CARB Approved Catalytic Converters.

Product Features:

• One Piece, Direct Fit Unit that eliminates the need for cutting, pipe bending, or welding.

• Available in many head styles including round, flat, pan, oval, truss, and hex
• Slotted, Phillips, Hex, Square, and a multitude of other varieties available
• Thread varieties include Machine Screw, Sheet Metal Screw, Self-Tapping, and others
• A large selection of diameters, lengths and quantities available in different assortments and/or kits

• Upgraded from steel and/or rubber construction to corrosion-resistant aluminum (where applicable)
• Includes clips and gaskets (where applicable)
• Direct replacement for trouble-free installation
• Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards

• Wrench flats allow the proper torque to be applied when tightening the inner tie rod end, avoiding rack and pinion gear damage.
• Knurled stud provides a positive grip when making toe adjustments.
• Full ball metal stud provides 360 degrees of smooth, consistent, rotational movement resulting in more responsive steering.

Walker has been a driving force of innovation over the past century. The brand's history of innovative engineering includes such "firsts" as the louvered-tube muffler, stainless steel muffler, aluminized exhaust products, and chambered-tube mufflers. These advantages continue today in virtually every premium Walker exhaust and emission control component. For Walker, innovation drives performance and satisfied customers.

• Replacing a clogged air filter can lead to increased horsepower and acceleration
• For optimal performance, change your air filter every 12,000 miles