Sheet Metal Screw-Hex Washer Head -No. 14 x 1-1/4 Inch to Manifold Converter

• Available in many head styles including round, flat, pan, oval, truss, and hex
• Slotted, Phillips, Hex, Square, and a multitude of other varieties available
• Thread varieties include Machine Screw, Sheet Metal Screw, Self-Tapping, and others
• A large selection of diameters, lengths and quantities available in different assortments and/or kits

• Direct plug in

• Best for intense sun locations
• Durable long-lasting fabric
• Solution dyed woven acrylic fabric
• Provides almost complete UV blockage
• 5-year warranty

Federal-Mogul engineers have extensive experience in designing components to accommodate changes in the engine due to wear. By leveraging this expertise, Sealed Power components ensure unmatched performance and reliability. In fact, Sealed Power's full range of engine components incorporate advanced in-house engineering and machining technologies combined with proprietary metallurgies that can improve fuel economy, reduce emissions and add durability to both gasoline and diesel engines.

Professionals trust Sealed Power components for both premium passenger car and light truck rebuilds. They meet or exceed the industry's toughest standards. Rely on Sealed Power products for your next engine rebuild or repair.

• Exact fit and length for precise installation
• The exact same part that was installed during engine assembly

• Includes spring and clips (where applicable)
• Smooth or textured surface available
• Chrome-plating available (where applicable)
• Available for front and rear driver and passenger sides

Omix-ADA is more than just a parts manufacturer, they're a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world's roughest terrain for about two decades. Omix's team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you.

Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

Product Features:

• 1976-1982 CJ5, 1976-1982 CJ7, 1981-1982 CJ8, Windshield Wiper Motor (3 Wire Plug)

Omix-ADA is more than just a parts manufacturer, they're a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world's roughest terrain for about two decades. Omix's team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you.

Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

Recognized by both the original equipment and the automotive aftermarket as an innovative, technologically driven organization, Dayco operates a fully integrated global network of technical facilities and sales offices employing a workforce of nearly 3,100. Dayco continues to be guided by the same primary business strategy established over 100 years ago: to anticipate and satisfy the needs of our customers by providing timely, quality products and services.

• Direct replacement for a proper fit every time
• High quality steel construction
• Conveniently available in many styles and in packs of different quantities
• Dorman’s Spindle Nuts are constructed to strict engineering quality standards

• For use with aluminum water pump pulleys
• 5/16"-24 X 3/4" tapered allen bolts

The KYB Strut-Plus means "OE-Plus" for your vehicle: The KYB Strut-Plus is a ready to install assembly that doesn’t require a special spring compressor to transfer parts. It’s OE-Plus because it’s designed to "restore" designed performance. That‘s better than using an OE replacement part because OE parts are designed for new vehicles, not used vehicles. The Strut-Plus goal is to help restore the vehicle’s Tire Control which affects vehicle stability, stopping distance, lane change responsiveness and overall handling. Every component in a complete strut assembly is critical to its overall performance: That’s why the KYB Strut-Plus only includes the highest OE or better components. At the heart of Strut-Plus is the Excel-G Gas Strut which is built on the same KYB OE assembly lines and is calibrated to compensate for wear caused by vehicle age & miles driven. Where applicable, the KYB Strut-Plus also includes a new coil spring, mount, insulator, bearing plate and attaching parts. The KYB Strut-Plus comes pre-assembled, saves time on installation, eliminates assembly errors and includes all necessary components to get the job done right; the first time.

Product Features:

• Where applicable: An improved, new coil spring that resists metal fatigue as much as 600% more than competitors and uses baked-on, powder coated paint to reduce rust & corrosion
• Where applicable: Includes hard to find, OE quality bearing plates and insulators
• Where applicable: A protective boot and bumper

• Clean Wheels
• Ultra-quiet
• No Break-in Needed
• Extremely Rotor Friendly
• Vehicle-Optimized Ceramic Formulas
• Ultimate upgrade for OE semi-metallic and low metallic brake pads

• Forged housing provides exceptional strength and durability
• Oxidation film on the surface of the metal protects against corrosion
• Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
• Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination

ACDelco has over 100 years of experience in the automotive industry and is a brand of GM Customer Care and Aftersales, a division of General Motors. ACDelco employs a two- or three-tiered distribution model, utilizing a network of appointed wholesale distributors to service independent installers, ACDelco independent service centers, retail and fleet customers.

• 16K Towing Capacity
• Single Handle Operations
• Auto Locking Mechanism/Dual Pivot Head
• 4 Position Height Adjustment
• 4 Position Height Adjustment
• 10 Deg. Lateral Movement
• Anti Rattle Skid Plate/Permalube Pivot Bushings
• 5 Year Warranty

• 100% resolder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
• 100% computer testing ensures reliable performance.

Professional technicians trust and value MOOG because of their reputation for solving problems. Vehicle owners who use MOOG parts enjoy responsive handling and the return of a "like-new" feel to their steering. And for more than 40 years, every NASCAR Cup champion has relied on MOOG ball joints for performance and durability.

Federal-Mogul MOOG chassis parts improve upon existing designs to deliver a "problem-solving" replacement product. MOOG is constantly working to develop new products that improve steering performance. The innovations Federal-Mogul engineers develop for the track, are reapplied for the street. Federal-Mogul has been the recognized leader in steering solutions for NASCAR for years.

Omix-ADA is more than just a parts manufacturer, they're a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world's roughest terrain for about two decades. Omix's team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you.

Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

Product Features:

• 1994-1996 Cherokee (4.0L), Ignition Tune Up Kit

Walker has been a driving force of innovation over the past century. The brand's history of innovative engineering includes such "firsts" as the louvered-tube muffler, stainless steel muffler, aluminized exhaust products, and chambered-tube mufflers. These advantages continue today in virtually every premium Walker exhaust and emission control component. For Walker, innovation drives performance and satisfied customers.