Rear Left Gas Strut Sold Individually to Mass Air Flow Sensor

Ride Comfort is important, but restoring a vehicle’s Ride Control; stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks & Struts are designed for the most important performance purpose: Restore the vehicle’s original capabilities. KYB is the world’s largest supplier of shocks and struts to new vehicle manufacturers. The Excel-G is made on the same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That earned Excel-G this classification: OEA (Original Equipment for the Aftermarket ). The KYB Excel-G is a Nitrogen gas-charged twin-tube design that includes every quality component that our global OEM products include.

Product Features:

• A seamless working cylinder vs. welded seams provides the best sealing surface throughout the entire piston stroke
• Precision multi-stage hydraulic valves that reduces fluid travel to minimize aeration and are calibrated the way OE intended the vehicle to perform
• Triple chrome-plated piston rod and multi-lip oil seals that reduce wear
• Solid, seamless mounting eye rings and bolt bushings that can’t separate and become noisy
• Chemically bonded insulator mounting bushings that won’t slip out
• A Teflon coated or phenolic piston band that reduces friction and provides a positive cylinder seal
• Specially formulated hydraulic fluid with multi-range viscosity for any weather climate

Wheel bearing locknuts are easy to remove or install with these specially designed sockets

Sockets are made of high-strength steel; openings resist "rounding out"

Can be used with an extension and torque wrench to tighten the locknut as required This socket has a 3/4" square drive opening, permitting the use of an extension and torque wrench to tighten the locknut as required.  Locknut removal and installation is simple, even when wide-rim wheels are involved, since a long extension may be attached to the socket to provide the necessary clearance.

• Designed for use in modern fuel injection systems and with oxygenated fuels

• Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
• Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
• FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
• Every part for the repair procedure is included in the kit unless otherwise noted

Walker has been a driving force of innovation over the past century. The brand's history of innovative engineering includes such "firsts" as the louvered-tube muffler, stainless steel muffler, aluminized exhaust products, and chambered-tube mufflers. These advantages continue today in virtually every premium Walker exhaust and emission control component. For Walker, innovation drives performance and satisfied customers.

• Each unit is 100% computer tested at 3 points in the remanufacturing process to ensure great performance.
• Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
• Improved over O.E. - Gears are redesigned with a stronger, less brittle material than O.E. to prevent premature wear, striping and breakage, thus extending the performance life.
• Motor magnets are 100% recharged for superior performance and reliability.
• New high-quality gaskets are used in every window lift unit to prevent water entry, thus eliminating failure modes related to water penetration.

• Advanced Ceramic Friction Formulas for Enhanced stopping power and longer life
• Ceramic formulas for Cleaner wheels
• 3 layer premium shims, slots, wear sensors and chamfers - Ultra-quiet braking
• Designed to provide safety and confidence while braking

Made of non-slip material

Chrome vanadium blades

Ultimate quality

Includes: #1, #3, and #2 x 4",  #2 x 10" and stubby blades

• Flat washers, split lock washers, fender washers, fiber washers and many other types available
• Manufacturing materials include steel, stainless steel, nickel alloy, and more
• Conveniently packaged in a variety of sizes, assortments, and quantities
• Also suitable for a broad variety of household, industrial and commercial uses

• Each unit is 100% computer tested at 3 points in the remanufacturing process to ensure great performance.
• Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
• Motor magnets are 100% recharged for superior performance and reliability.

• Legal for on-road use
• OE quality
• Lights dim over time
• Replace lights in pairs

• 1-piece terminal post for added strength
• Nickel-plated Shell helps prevent corrosion
• Meets or exceeds OE design

• Saves time and money by accomplishing the same function as special pressure or vacuum equipment
• Stainless, brass and zinc-coated to powerfully resist corrosion and stripping
• Direct replacement for a proper fit every time
• Universal application

• Comes with reservoir cap
• Level sensor included (where applicable)
• Direct replacement for a proper fit every time
• Quality tested to ensure trouble-free installation and performance

• Custom Patterned Seat Protection
• Easy-On / Easy-Off
• Throw in Home Washer When Dirty
• (7) Color Choices
• Warranty: 90 Days

• Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
• Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
• FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
• Every part for the repair procedure is included in the kit unless otherwise noted

• Comes with reservoir cap
• Level sensor included (where applicable)
• Direct replacement for a proper fit every time
• Quality tested to ensure trouble-free installation and performance

• All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
• Full Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride
• Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
• Heavy Gauge Calibrated Coil Spring: Computer designed for maximum performance without an increase in ride harshness.
• Unique Groove Tube - PSD: Precision tapered grooves in the pressure tube perform like an additional stage of valving for optimum ride tuning.
• 5/8" Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
• Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
• Special Seal: "Self-lubricating" fluid seal designed to retain gas without excessive wear or friction.

Walker has been a driving force of innovation over the past century. The brand's history of innovative engineering includes such "firsts" as the louvered-tube muffler, stainless steel muffler, aluminized exhaust products, and chambered-tube mufflers. These advantages continue today in virtually every premium Walker exhaust and emission control component. For Walker, innovation drives performance and satisfied customers.

• Problem Solver® powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.
• Patent pending Sunoloy coated metal bearings provide smooth stud swing technicians and drivers prefer.
• Problem Solver® patented cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life part.
• Exclusive cover plate protects against contaminants leaking into the bearing surface.

• RPT’s complete line of "New" Mass Air Flow Sensors, featuring C-MAFS Ceramic PC boards to ensure premium performance and durability.
• Provide more consistent voltage to eliminate engine rough idle problems.
• Platinum connector threads reduce the number of connection points for faster reaction to change.
• Silica gel is applied to ceramic PC boards to protect the chip, providing superior resistance to extreme temperature fluctuations and vibration.
• All units are produced at our Taiwan facility with state-of-the-art robotics.
• 100% new units are engineered and tested to meet or exceed OE specifications