LeakGuard SpotGun Jr. Kit to Idle Air Control Valve And Gasket

Leak Guard is specifically formulated for slow leaks that can occur over a 6-12 month period (or a leak rate of 25 oz. per year)

An excellent alternative to costly repairs

Can safely remain in the A/C system and prevent leaks from occurring in the future  - an excellent preventative maintenance product!

 Kit includes: 2 cartridges of Leak Guard, primer cartridge to pre-fill the hose, bleed adapter, Spotgun Jr. Injection gun; low side adapter hose, UV dye that is certified to meet SAE J-2670 Standard and is OEM approved. Leak Guard has been rigorously tested for stability and compatibility. Leak rate testing; wear testing; viscosity effect testing; stability testing; no particles, precipitates or insoluble; no refrigerant decomposition; non-metallic materials compatibility. Will not clog or crystallize. Services 2 vehicles.

• All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction
• Full Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride
• Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
• 1-3/8" Bore: Lower operating pressure than standard 1" bore units
• Unique Groove Tube - PSD: Precision tapered grooves in the pressure tube perform like an additional stage of valving for optimum ride tuning.
• Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
• 5/8" Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
• Special Seal: "Self-lubricating" fluid seal designed to retain gas without excessive wear or friction.

• Replace the failed part, not the whole assembly
• High quality aluminum construction
• Direct replacement for ease of installation
• Quality-tested to ensure trouble-free performance and durability

• Designed To Outlast Thermal Flashers
• Trailering Capable
• Capable Of Handling Up To 10 Lamps

• Available in a variety of styles, including illuminated, non-illuminated, duck bill, and racing .
• A large selection available to support many different amperages and applications
• Many different colors available, including red, green, amber, and blue (where applicable)
• Also suitable for a broad range of industrial and commercial uses

• 8 amp medium charge – self-adjusting charge rate for everyday charging needs and keeping your battery in peak condition.
• 2 amp slow charge – for charging and maintaining small batteries.
• 50 amp clamps – for top and side-mounted battery posts.
• Easy-to-feel button control switches for selection of Display Mode, Charge Rate or Battery Type.
• Retractable handle for easy portability and storage.

 180 tooth precision ratcheting system allows clamping in any position

Dual layer cushioned handles for comfort and grip

Comes with 7 different interchangeable tips

Changing tips are fast and secure with the quick release collar Introducing the latest innovation incorporating Gear Force technology, Gear Plier.  The Gear Plier combines fine ratcheting action (180 teeth) with interchangeable tips, to provide unmatched performance and flexibility when compared to all other specialty pliers.  The pliers itself is made from cast stainless steel for strength and durability.  It features a dual material grip for comfort and to minimize slip.  This set includes: Gear Plier handle, 2 hose clamp tips, 2 spark plug boot puller tips, fuse/module puller tip, and Push-pin puller tips for removal of plastic anchors.   This set is packaged in a blow molded case, which includes the unique block and rail storage system to hold tips for easy access.

• Significantly cuts costs by eliminating the need for a new A/C compressor
• Uses original length serpentine belt
• Lightweight for easy handling
• Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards

• Many different types available, including long, dual and tube styles
• Corrosion-resistant brass design for a long service life
• Also suitable for a broad variety of industrial and commercial uses
• Available individually and in a variety of piece counts to assist with both small and large projects

• Available in many different styles including 3-way tees, elbows, unions, and more
• Hard-wearing brass or steel construction for a long service life
• A wide range of tube diameters and pipe sizes available
• Conveniently packaged in a variety of piece counts to assist with both small and large projects

• Outstanding sludge resistance provides superior transmission life
• Enhanced friction durability helps improve shifting performance
• Certified and approved by General Motors for all cars and trucks that require DEXRON®-VI
• Also satisfies requirements of DEXRON®, DEXRON®-III H, III, IIE and II

• Industry Leading Touch-Up Paint Technology
• Duplicates Original Chrysler Colors
• Roller Ball Tip Ideal For Precision And Control
• Taper-Tip Brush Ideal For Large Coverage
• Dry To Touch In 20 Minutes / Handle In 40 Minutes
• Clear Coat Needed To Match Original Factory Finish

• Engineered with PowerFrame positive grid technology which virtually eliminates premature failure and resists corrosion up to 66% more effectively than other grid designs.
• PowerFrame provides superior starting performance over the life of the battery with up to 70% better electrical flow than other grid technologies.
• PowerFrame manufacturing process uses 20% less energy and releases 20% fewer greenhouse gas emissions than other manufacturing methods.
• Built to meet or exceed vehicle starting power requirements
• Maintenance free for maximum convenience
• 3 year free replacement warranty

• Triple gasket-sealing process virtually eliminates gas leakage past the shell
• 99% highly pure alumina silicate insulator enables use of longer insulator noses to reduce fouling
• 3-step trivalent-plating process uses silver chromate and zinc for maximum corrosion resistance

• Approximate size: 6-1/2"H with 2" dia. Mounting base
• Adhesive mounting tape included

• Precision designed micro-finished shafts
• Factory pre-set Pitman Shaft
• 100% tested OEM Grade Seals and O-rings

• Problem Solver® powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.
• Problem Solver® patented cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life part.
• Full ball metal stud provides 360 degrees of smooth, consistent, rotational movement resulting in more responsive steering.
• Patent pending Sunoloy coated metal bearings provide smooth stud swing technicians and drivers prefer.
• MOOG® engineered steel composition results in a stronger component.
• Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear.

• Easy installation

• Idle Air Control Valve And Gasket