7" Heavy Duty Air Angle Grinder to Bracket Top Bow Rear LH

• Triple gasket-sealing process virtually eliminates gas leakage past the shell
• 99% highly pure alumina silicate insulator enables use of longer insulator noses to reduce fouling
• Three-step trivalent-plating process uses silver chromate and zinc for maximum corrosion resistance

SureGrip hex design drives the side of the fastener, not the corner

Box ends feature deep offset for improved hand clearance in tight work spaces

Made in the U.S.A.

Lifetime warranty8 piece set is made in the U.S.A., featuring SK's high polish SuperKrome finish, which protects the tools from the harsh working environments found in today's work place. The SureGrip wrenching design on wrench box ends, drives the side of the hex of the fastener, not the corner, to increase torque and avoid edge breakage, especially on rusted or damaged fasteners. Set includes: 6 point SuperKrome Short Deep Offset Box End wrenches 6mm x 7mm, 8mm x 9mm, 9mm x 10mm, 11mm x 12mm, 13mm x 14mm, 15mm x 16mm, 17mm x 19mm and 18mm x 20mm. Packaged in a plastic tray. 

• Manufactured to strict requirements, including 100% new replacement of all bearings, brushes and bushings. Ensuring a quality product each and every time.
• Stringently tested through our industry leading T3 testing procedure where individual components, sub assemblies and complete units are tested to meet or exceed OEM specifications.
• Enhanced design including the use of oil-impregnated bushings, synthetic lubricants and high temperature seals for optimum durability.
• One year unlimited mileage unlimited hour warranty

• Engineered for direct fit
• Gas charged lift support
• User-friendly installation

• Thermostatic sandwich adapter
• Designed to fit between the filter and engine block
• Allows for installation of an engine oil cooler
• 5 models available for a wide range of applications

• Cardone Select Engineered (CSE) Technology ensures that all master cylinders meet or exceed O.E. form, fit and function.
• Life-cycle testing ensures that every master cylinder exceeds S.A.E. stroke requirements.
• All cylinder bores are micro-finished to precise specifications to dramatically reduce wear and promote long service life.
• Seals are temperature-cycled from -30°F to +220°F to ensure leak-free, reliable performance under harsh under-hood conditions.
• EPDM seals and O-rings meet O.E. quality standards to ensure reliable, leak-free performance.
• Rubber components are tested to comply with stringent S.A.E. specifications.
• Aluminum castings are designed to precision tolerances to ensure like-new performance.
• Aluminum castings are designed to precision tolerances to ensure like-new performance.
• Mounting components are included with every model for easy installation.

• The Intermotor brand has built its reputation by engineering and distributing a full line of genuine import parts - parts that are unrivalled for quality, original look, fit, form & function, as well as coverage.
• Our Canister Purge valves meet or exceed original equipment specifications, providing confidence in every box
• Featuring industrial grade materials for robust performance
• End of the line testing ensures quality in every box
• Manufactured with the highest grade materials for prolonged life and superior performance
• BWD is a global manufacturer of emission components, complete quality control is maintained through the manufacturing process from componentry to finished product
• Warranty: 3 years/36,000 miles

• Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
• Improved OE connectors to eliminate excessive electrical resistance and provide better heat dissipation
• Engineered to stringent tolerances based on our Montreal engineers’ in-depth knowledge of the OE part it’s designed to replace
• Includes strainers for smoother installation process and ensures a clean fuel system upon replacement

• Includes all hardware needed for a complete repair (where applicable)
• Materials used in construction have been upgraded from steel and/or rubber to corrosion-resistant aluminum (where applicable)
• Direct replacement for ease of installation
• Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards

• A necessary safety item for preventing fuel leaks
• Fits standard and oversized fuel inlets
• Conveniently packaged in a range of piece counts to assist with both small and large projects
• Easy to install

• Designed for longevity
• Great heat resistant properties
• Max protection from spark loss
• Locking dual crimp terminals

• Replacement restores brake system to proper operation
• Durable against harsh road and weather conditions
• Direct replacement for a proper fit
• Manufactured to strict engineering quality standards

• Direct fit ensures trouble-free installation
• Long-lasting enamel paint prevents flaking, peeling and fading
• High-tensile strength spring rate maintains proper wiper blade to glass contact
• No adapters or adjustments needed for installation

• Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
• Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
• FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
• Every part for the repair procedure is included in the kit unless otherwise noted

• Original Equipment Quality Parts
• Made in Korea
• Manufactured by ISO-14000, QS-9000, or ISO/TS-16949 certified suppliers

Omix-ADA is more than just a parts manufacturer, they're a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world's roughest terrain for about two decades. Omix's team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you.

Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

Product Features:

• 1945-1949 CJ2A, 1948-1953 CJ3A, Top Bow Bracket, Rear, Left