Power Steering Gear Box to Drum Brake Self-Adjuster Repair Kit

Remanufactured power steering gear box; direct fit with a limited lifetime warranty.

Lightweight design for all-day comfort
Adjustable nose piece reduces slippage and provides a personalized, comfortable fit
Soft temple tip pads ensure a fit that is both comfortable and secure
A nine-base, wrap-around lens design provides close-to-the- face protection and superior coverage
Lightweight frameless design offers 180 degrees of distortion-free, unobstructed vision The Uvex Ignite boasts hot, "get noticed" style with all the protection and comfort you expect from a brand like Uvex. Lightweight and frameless, with clean lines and an exceptionally comfortable fit, the Uvex Ignite will get workers fired up about staying protected. Sleek, sporty frameless design with clear, hardcoat lenses. Meets military V0 ballistic test for impact (Protection against impact energies 7x higher than ANSI requires). Complies with both ANSI Z87+ and CSA Z94.3 standards. 

OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.

BWD throttle position sensors maintain specific installed outputs to match OE rather than adjustable consolidated designs. The circuits are printed on flexible polyimide film or ceramic-based substrates for excellent dimensional stability and for the prevention of electrical performance drift.

When replaced, Driveworks tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts ensure promote improved steering response and durability.

Monroe Strut-Mate mounting kits are direct fit replacements designed to complement the ride control characteristics of Monroe struts. In addition, our full line will provide you with late model original equipment coverage. When doing strut replacements, it is important to do the complete job. This means not only replacing the struts but also inspecting and replacing worn strut mounts. Remember, worn strut mounts can adversely affect a vehicle's safety and handling. Not only are strut mounts a necessary component of the suspension system, they consist of rubber to metal bonded parts that wear out over time as well. Worn bearings may also cause noise, steering binding, vibration and vehicle pull. Strut-Mate mounting kits can include*: Strut Mount, Bearing, Upper Spring Isolator, Lower Spring Isolator, or Upper Spring Seat. (*as applicable by OE design)

Product Features:

• Replacing all your warn strut components ensures a complete repair
• High-Quality premium strut components
• Engineered for superior fit and performance
• Monroe Strut-Mate mounting kits* include: Strut Mount, Bearing, Upper Spring Isolator, Lower Spring Isolator, or Upper Spring Seat.
• * Each kit sold separately

Dorman’s Wheel Nuts are designed and constructed to strict engineering quality standards. All of our Wheel Nuts are manufactured with high corrosion resistance to combat rust in any environment. Available in multiple styles and finishes, they match the original to blend in with the overall aesthetic design of your car. Chrome upgrade nuts are also available in multiple styles and colors to enhance the look of your wheels.

Product Features:

• Wheel nut covers also available
• Easy to install
• Available in different quantities and packaging options
• Chrome wheel nut & lock kits available (where applicable)

This brake hardware is manufactured to replace used, weakened hardware. Replacing the hardware will help ensure safer stops and longer friction life.

Forged from the finest chrome molybdenum alloy steel - the best choice for strength and durability
Radius corner design - to extend the life of fasteners
The design drives the side of the fastener instead of the corner
Provides increased strength, but also avoids rounding of rusted or damaged fasteners
Fully guaranteed No doubt, Sunex tools offer one of the most complete and toughest Impact Socket lines around. This 3/4" drive 1-9/16" standard 6 point socket is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job. It also features a radius corner design, causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners, resulting in less wear on the fastener.

Designed to provide enhanced endurance and maximum contamination exclusion while ensuring proper fit, form and function.

BWD's manufacturing process includes the extensive use of robotics for precision assembly. 100% product in-line and end-of-line inspection from raw materials to the packaging of the finished product.

Sealed Power engine products are a complete system of application-engineered internal replacement components, including pistons, piston rings, engine bearings, camshafts, oil pumps, timing components and valvetrain products. These proven replacement parts are the result of nonstop product development efforts, dedicated to putting only the absolute best on the street.

Federal-Mogul engineers have extensive experience in designing components to accommodate changes in the engine due to wear. By leveraging this expertise, Sealed Power components ensure unmatched performance and reliability. In fact, Sealed Power's full range of engine components incorporate advanced in-house engineering and machining technologies combined with proprietary metallurgies that can improve fuel economy, reduce emissions and add durability to both gasoline and diesel engines.

Professionals trust Sealed Power components for both premium passenger car and light truck rebuilds. They meet or exceed the industry's toughest standards. Rely on Sealed Power products for your next engine rebuild or repair.

Manufactured to the exceed original equipment specifications. Certified to TS16949, ISO14001 and OHSAS 18001 standards for quality in manufacturing, safety and environmental practices.

Product Features:

• New precision-ground, one-piece bearing assembly sealed to withstand contaminants and lubed for life to provide long, trouble-free service
• Patented unitized ceramic seal for leak-free performance
• 100% of all the manufactured water pumps are leak tested after assembly
• Exact OE fit

Fenco, a subsidiary of Motorcar Parts of America, has evolved to become a leader in the North American Automotive Aftermarket, offering multiple lines of both Remanufactured and New products.

Product Features:

• Premium Unloaded/Semi-Loaded/Loaded
• OEM Grade Rubber Components
• Correct OEM Specified Piston Material
• Essential Mounting Hardware Included
• Exclusive Rustproof Coating

Direct replacement.

KYB Corporation produces a variety of ride control, hydraulic, and electronic products for use as original equipment and replacement parts in automobiles, motorcycles, trucks, specialty vehicles, buses, aircraft, railroad cars, industrial applications, agricultural applications, and civil engineering projects. KYB’s global headquarters is located in Tokyo, Japan. By consistently developing world class ride control products, KYB has become the world's largest supplier of OE and aftermarket shocks and struts. In fact, more than 1 in 5 vehicles built around the world use KYB shocks and struts. KYB has 32 facilities in 21 countries, and 15 manufacturing plants in Asia, the United States, and Europe. While much of KYB's overall sales are from automotive shock absorbers, KYB also produces a wide range of hydraulic and electronic equipment used in a variety of applications in many aspects of modern life. Vehicular and transportation applications include power steering systems, automotive electronics, construction equipment, agricultural equipment, special use vehicles, railroading, aircraft, and maritime shipping. Other KYB product applications include hydraulic equipment used in manufacturing, testing, lifestyle, and civil engineering projects, as well as special needs equipment such as wheelchairs. The varied uses and applications of KYB products and equipment demonstrate our commitment to helping create a safer, more efficient, and more comfortable society.

KYB AGX manually-adjustable shocks and struts allow you to design your own ride control performance without special tools, quickly and as often as you want. That makes the KYB AGX a perfect choice for sports enthusiasts and vehicles with multiple purposes like occasional towing. Sports enthusiasts can raise individual corner damping rates up to 125% more than the vehicle’s OEM design. Occasional load users appreciate the adjustable damping rates to match their driving needs without raising the vehicle and without special tools. For ease of access, depending on vehicle application, the KYB AGX either has an eight position knob or a four position screwdriver slot. However, both offer the same overall capability. One simple, manual adjustment increases both rebound and compression damping. Whether on the street or on a race track, AGX’s velocity sensitive damping valves instantly react to driving conditions to maintain tire contact and vehicle control. The AGX is a great solution for more demanding conditions that OE replacement parts just can’t handle.

Product Features:

• Increased adjustable damping range up to 125% more than OE
• Both competition performance and street use
• External dial allows hand adjustment or some struts include an easy-access screwdriver slot at top
• Precision multi-stage hydraulic valves for a broad performance range
• Triple chrome-plated piston rod and multi-lip oil seal that reduces wear
• A seamless working cylinder provides the best sealing surface throughout the entire piston stroke
• Solid, seamless mounting eye rings and bolt bushings that can’t separate and become noisy
• Chemically bonded insulator mounting bushings that won’t slip out
• A Teflon-coated or phenolic piston band that reduces friction and provides a positive cylinder seal
• Specially formulated hydraulic fluid with multi-range viscosity for any weather climate

MOOG Problem Solver products incorporate proven design and engineering features to ensure like new steering, ease of installation and longer life. MOOG is the preferred steering and suspension parts brand of professional technicians and NASCAR Crew Chiefs.

Product Features:

• Problem Solver® powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.
• Full ball metal stud provides 360 degrees of smooth, consistent, rotational movement.
• Durable, all metal construction for longer life.
• A thick bar is used for added strength and durability.
• Wrench flats at the base of the stud allow for a positive hold and the use of sockets for quick and easy installation and removal.
• Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear.

BWD Sockets and Pigtails are manufactured to meet or exceed OE performance.

Engineered to manage engine torque and drive line alignment. Direct OE replacement. Premium materials and construction effectively dampens vibration and noise.

Designed to provide enhanced endurance and maximum contamination exclusion while ensuring proper fit, form and function.

High Performance Transmission Oil Cooler 3/4" x 7-1/2" x 15-1/2". Heavy duty. Black. Imperial High Performance coolers are designed to provide outstanding cooling as well as complement other high-performance accessories.

Product Features:

• Imperial high-performance transmission cooler
• Size: 3/4" x 7-1/2" x 15-7/8"
• SAE 45-degree fittings for maximum reliability
• Electrostatic powder-coated to prevent corrosion

Dorman’s Engine Oil Drain Plug Gaskets are conveniently available in packs of varying quantities. Many styles are offered, including Copper, Aluminum, Nylon, Metal/Rubber, Inset, Fiber and Crush gaskets. Replacement is recommended at every oil change. Oil filter caps are available separately.

Product Features:

• Direct replacement gaskets and some universal gaskets available. Proper fit with the drain plug ensures a tight seal.
• Gaskets are also included with many of Dorman’s Engine Oil Drain Plugs and Pans
• Made to specific sizes and standards to ensure a proper fit
• Designed and constructed to strict engineering quality standards

Gardner-Westcott has taken care of the task of identifying thread pitches, diameters, lengths and grade requirements, etc., so the only thing left for you to do is select your kits. Years of research and knowledge regarding fasteners, coupled with the expertise that comes from many customizing projects, has enabled Gardner-Westcott to achieve this. The kits range from a simple point cover set, or head studs for Norton’s, to what Gardner-Westcott calls "fender to fender" detailing. Gardner-Westcott kits are absolutely complete as they have you in mind when created and contain nuts, flatwashers, lockwashers and other essential items for you to complete your project.

From the leader in aftermarket engine sealing, FEL-PRO the gaskets professionals trust.

Product Features:

• Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
• Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
• FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
• Every part for the repair procedure is included in the kit unless otherwise noted

When it comes to seat covers, fit is everything. Bestop seat covers fit perfectly and feature a durable knot backing to help resist slippage. Available in Charcoal, Black Denim, Dark Tan, and Spice.

Product Features:

• Automotive Grade Vinyl Fabric
• Factory Color-Match w/Interior
• Some Include Rear Map Pocket
• Easy Bungee Cord Attachment
• Custom Designed For Tight Fit
• Knit Backing Resist Slippage
• Quick Installation

Walker, one of the core brands of Tenneco, builds upon its worldwide OE partnerships and manufacturing facilities to deliver OE look, fit and dependability. Walker's worldwide network of full-service engineering and development centers span five continents and allows Walker to bring new products and the latest technologies to the market faster. With this world-class support, Walker possesses the technical excellence needed to meet today's needs while developing solutions to tomorrow's challenges.

Walker has been a driving force of innovation over the past century. The brand's history of innovative engineering includes such "firsts" as the louvered-tube muffler, stainless steel muffler, aluminized exhaust products, and chambered-tube mufflers. These advantages continue today in virtually every premium Walker exhaust and emission control component. For Walker, innovation drives performance and satisfied customers.

Old gaskets can wear over time due to changes in under-hood temperatures or can be torn during engine service, resulting in poor engine idle and performance.

The Rack and Pinion gear set is a simple mechanism that enables you to efficiently steer your car. You’ll find the pinion gear at the end of the steering shaft. Once the steering wheel turns, this gear spins and moves the rack, which turns the wheels. The shafts on which the rack and pinion are attached meet OEM specifications; premium-quality bearings help to deliver a smoother steering experience. Valve housing has polished micro-finish sleeving for durability. OEM-grade O-rings and seals meet required specifications. Factory computer-tested.

Product Features :

• Micro-Finish sleeving of valve housing
• Factory Computerized-tested for safety
• OE-grade Seals and O-rings
• Premium OE quality bearing
• Centreless polished shafts

Federal-Mogul's innovative Sealed Power® "A-series" bored aluminum bearings are ultramodern bimetal bearings that offer increased wear resistance.

This brake hardware is manufactured to replace used, weakened hardware. Replacing the hardware will help ensure safer stops and a long performance life.