Brake Rotor to Brake Cable

Wagner Brake has been engineering and manufacturing rotors for decades. This heritage provides the foundation for Federal-Mogul's ability to engineer, test and certify rotors for safe, effective performance in today's vehicles.

Wearever Rotors are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design and non-directional finish that eliminates noise and enhances pedal feel. Wearever Rotors are designed to dissipate heat helping to eliminate brake fade and increase the life of your pads. Ready to install out of the box to save you time.

Product Features:

• Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
• Exceeds ISO manufacturing guidelines. (International Organization for Standardization)
• OE vane configuration to dissipate heat, increasing pad life.
• Proper harmonic design helps to reduce brake noise.
• Non-directional finish for less break-in time and reduced brake noise.
• Ready for immediate "out-of-the-box" installation (after cleaning)
  
  Advance Auto Parts Rotor Tips:

  • Recommend using Wearever Brake Clean to remove residual manufacturing oils prior to installation.
  • Always use a torque wrench to tighten wheel bolts to the manufacturers'' specifications to prevent pedal pulsation.
  • Always replace rotors in pairs to improve stopping power.

At Last An Easy To Install, One Piece Musical Speaker That Delivers True Musical Instrument Sounds. Install "Music Time" In The Engine Compartment, Connect A Wire To Ground And The Other To 12 Volts And The Horn Is Ready To Play. All Functions: On/Off, Volume And Song Selection Are Controlled By The Small Key Chain Transmitter From Within Or Outside Vehicle. No More Compressor, Air Hoses, Trumpets, Relay, Switch And Wiring Through The Vehicle. Each Model Plays Of Music Time Plays 2 Different Songs. 001 Wedding Song & Hava Naglia 002 La Cucaracha & Mexican Hat Dance 003 Dixie (Dukes Of Hazard) & On The Road Again

Product Features:

• Simple To Install Into The Engine Compartment - Connect One Wire To Ground, The Other To 12 Volts And Music Time Is Ready To Play
• All Functions - On/Off, Volume And Song Selection Are Controlled By A Key Chain Transmitter From Inside Or Outside The Vehicle

K&N Engineering in Riverside California is the world's leading manufacturer of washable performance air filters and air intake systems. K&N invented the reusable high flow cotton air filter in 1969 and has been perfecting the technology ever since.

K&N is a world class filtration company selling air filters, oil filters, and air intakes in over 30 countries. K&N sells over 5,000 products designed for cars, trucks, motorcycles, engines, and industrial applications.

From their Million Mile Warranty to their Consumer Protection Pledge, K&N stands behind their products and their consumers 100%. The distinctive K&N logo represents performance from one of the original performance companies.

Wagner brake master cylinders are manufactured to meet or exceed original equipment specifications.

BWD EGR valves are manufactured to meet or exceed OE performance.

Wagner Brake Hoses are manufactured to meet or exceed original equipment specifications.

K&N Engineering in Riverside California is the world's leading manufacturer of washable performance air filters and air intake systems. K&N invented the reusable high flow cotton air filter in 1969 and has been perfecting the technology ever since.

K&N is a world class filtration company selling air filters, oil filters, and air intakes in over 30 countries. K&N sells over 5,000 products designed for cars, trucks, motorcycles, engines, and industrial applications.

From their Million Mile Warranty to their Consumer Protection Pledge, K&N stands behind their products and their consumers 100%. The distinctive K&N logo represents performance from one of the original performance companies.

Wagner Brake Parking Brake Cables are manufactured to meet or exceed original equipment specifications.

Give Any Truck The Powerful Sound Of A Train Air Horn. The Siberian Express Has Been Engineered With The Latest Technology Using Reinforced Abs. The Sound Produced By The Three Trumpets Is Incredible. Using Reinforced Abs Decreases The Overall Weight Making Installation Easier And Ensuring Less Vibration When Driving On Rough Roads. The Trumpets And Mounting Base Are Finished With An Attractive Semi-Gloss Black Finish. The Siberian Express Requires An On-Board Air System With A Minimum Of Three-(3) Gallon Storage Tank, (Recommended Wolo On-Board Air System Model 840). Comes With All Mounting Hardware And 10 Feet Of ¼” Nylon High-Pressure Hose. Model 847 (Black) Built With Heavy-Duty 12 Volt Electric Solenoid Model 848 (Black) Built With Heavy-Duty 24 Volt Electric Solenoid Model 849 (Black) Operates By A Manual Lanyard Valve. Lanyard Valve Included Model 850 (Chrome) Built With Heavy-Duty 12 Volt Electric Solenoid Model 851 (Chrome) Built With Heavy-Duty 24 Volt Electric Solenoid Model 852 (Chrome) Operates By A Manual Lanyard Valve. Lanyard Valve Included

Product Features:

• Model 850 (Chrome) Built With Heavy-Duty 12 Volt Electric Solenoid
• Horn Size: L 16 1/2 In. X W 14-3/4 In. X H 11 In.
• Sound Output: 152Db / 150 Hz
• Horn Construction: Abs Bright Chrome Plated Finish, Steel Mounting Base
• Mounting Hardware: Stainless Steel
• Air Fitting: 1/4"

Wagner Brake has been engineering and manufacturing drums for decades. This heritage provides the foundation for Federal-Mogul's ability to engineer high-quality drums and certify that they deliver safe, effective performance when used in today's vehicles.

K&N Engineering in Riverside California is the world's leading manufacturer of washable performance air filters and air intake systems. K&N invented the reusable high flow cotton air filter in 1969 and has been perfecting the technology ever since.

K&N is a world class filtration company selling air filters, oil filters, and air intakes in over 30 countries. K&N sells over 5,000 products designed for cars, trucks, motorcycles, engines, and industrial applications.

From their Million Mile Warranty to their Consumer Protection Pledge, K&N stands behind their products and their consumers 100%. The distinctive K&N logo represents performance from one of the original performance companies.

Accessories, Body & Wipers > Paint & Body Repair > Repair Parts & Accessories

Wolo Has Designed The Orient Express Horn To Be Smaller In Size So To Fit Into Engine Compartments That Have Less Open Space. Four (4) Brass Triple Chrome Plated Trumpets Produce The Powerful Train Horn Sound. The Orient Express Will Provide The Driver With Comfort Of Knowing That He/She Will Be Heard! Requires An On-Board Air System With A Minimum Of 3-Gallon Storage Tank, (Recommended Wolo On-Board Air System Is Model 840). Built With A Heavy-Duty 12-Volt Electric Solenoid. The Orient Express Comes With Mounting Hardware And 10 Feet Of ¼" Nylon High-Pressure Hose.

Product Features:

• Horn Size: L 18-7/8 In. X W 13-3/4 In. X H 4-1/4 In.
• Horn Construction: All Metal, Trumpets Are Brass Chrome Plated
• Air Fitting: 1/4"

Transmission & Drivetrain > Manual Transmissions > Clutch Components

Remanufactured Clutch Assembly with Coil

Accessories, Body & Wipers > Auto Body Parts > Lifts, Latches & Handles

Designed to meet the increasing demands of today's engines. Each of our oxygen sensors is constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each Denso sensor.

AEM Hybrid Air Intakes are direct-fit intakes for select Honda and Acura models with engine swaps. They are designed, tuned, and dyno-tested to fit specific cars with specific engines. These intakes usually include an oversized AEM Dryflow synthetic washable air filter for optimum air flow, filtration, and performance while allowing easy oil-free cleaning. Most AEM hybrid intake systems use three-inch diameter mandrel-bent aluminum intake tubes and high quality hardware designed to reduce restriction and intake temperature. The design and components of each intake system vary so consult the installation instructions for more information on the contents of each part number. Since AEM hybrid intakes are designed for cars with engine swaps, they are intended for off-road use only and are not 50-state legal.

Wagner Brake Parking Brake Cables are manufactured to meet or exceed original equipment specifications.

Wagner Brake Products provide the latest innovations in braking technologies and complete coverage for passenger vehicles and medium-duty commercial applications.

Wagner Brake Products continue to set industry standards with engineering expertise and a commitment to ensuring that Wagner parts deliver original equipment fit, form and function to deliver superior braking performance.

With comprehensive coverage, Wagner Brake offers all the components necessary for a complete brake repair. Wagner premium products offer exceptional quality for all the latest applications.

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel sending units meet or exceed the performance of the original equipment they replace.

Product Features:

• Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
• Precision tested fuel level sensors ensures vehicles fuel gage will provide an accurate reading at any fuel level
• Includes strainers for smoother installation process and ensures a clean fuel system upon replacement
• Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace

K&N Engineering in Riverside California is the world's leading manufacturer of washable performance air filters and air intake systems. K&N invented the reusable high flow cotton air filter in 1969 and has been perfecting the technology ever since.

K&N is a world class filtration company selling air filters, oil filters, and air intakes in over 30 countries. K&N sells over 5,000 products designed for cars, trucks, motorcycles, engines, and industrial applications.

From their Million Mile Warranty to their Consumer Protection Pledge, K&N stands behind their products and their consumers 100%. The distinctive K&N logo represents performance from one of the original performance companies.

Wagner Brake Hoses are manufactured to meet or exceed original equipment specifications.

Wool's Aurora Has Two (2) Powerful Halogen Rotating Lights, Each Producing 125 Flashes Per Minute. Aurora Is Built With A Diamond Shaped Mirror Between The Warning Lights For True 360-Degree Visibility. The Replaceable Lens Is Constructed Of Strong Polycarbonate And Is Made To Withstand All Weather Conditions. Includes A 10 Ft. Flat Power Wire With A Cigarette Lighter Plug That Has Rocker On/Off Switch And Internal Fuse. The Magnets Position Can Easily Be Adjusted By Sliding The Brackets To The Desired Location To Ensure Maximum Holding Strength On A Flat Surface Of The Vehicle. Aurora Is Ideal For Compact And Full Size Vehicles.

Product Features:

• Bulb Type; 796 Halogen 35 Watts, Included And Installed, Light Ready To Use.
• 125 Flashes Per Minute
• Dimensions: L 24 In. X W 12 In. X H 5-1/2 In
• 12 Volts / 5.5 Amps
• Magnet Pull Strength 4-60 Lbs. The Four Magnets Are Rubber Covered To Protect The Vehicles Paint.
• Available In Amber, Blue, & Red

When A Truck Owner Demands A Ultra Powerful Horn, The Cannon Ball Express Is The One To Choose. Gives Any Truck A True Train Horn Sound. Constructed Of All Metal With Three (3) Triple Chrome Plated Trumpets. The Horn's Base Is Plated Steel. The Cannon Ball Express Requires An On-Board Air System. Comes With All Required Mounting Hardware And 10 Foot Length Of 1/4" Nylon High Pressure Hose. Model 837 Ev12 Built With Heavy-Duty 12 Volt Electric Solenoid Model 838 Ev 24 Built With Heavy-Duty 24 Volt Electric Solenoid Model 839 Lv Operates By A Manual Lanyard Valve. Lanyard Valve Included

Product Features:

• Horn Size: L 16 1/4 In. X W 15 In. X H 11 In.
• Sound Output: 152Db / 150 Hz
• Horn Construction: All Metal, Trumpets Are Brass Chrome Plated
• Mounting Hardware: Stainless Steel
• Air Fitting: 1/4"

K&N Engineering in Riverside California is the world's leading manufacturer of washable performance air filters and air intake systems. K&N invented the reusable high flow cotton air filter in 1969 and has been perfecting the technology ever since.

K&N is a world class filtration company selling air filters, oil filters, and air intakes in over 30 countries. K&N sells over 5,000 products designed for cars, trucks, motorcycles, engines, and industrial applications.

From their Million Mile Warranty to their Consumer Protection Pledge, K&N stands behind their products and their consumers 100%. The distinctive K&N logo represents performance from one of the original performance companies.

Wagner Brake Parking Brake Cables are manufactured to meet or exceed original equipment specifications.

Wagner Brake Products provide the latest innovations in braking technologies and complete coverage for passenger vehicles and medium-duty commercial applications.

Wagner Brake Products continue to set industry standards with engineering expertise and a commitment to ensuring that Wagner parts deliver original equipment fit, form and function to deliver superior braking performance.

With comprehensive coverage, Wagner Brake offers all the components necessary for a complete brake repair. Wagner premium products offer exceptional quality for all the latest applications.