Fuel Injector to ThermoQuiet Ceramic Brake Pads - Front (4-Pad Set)

• Each unit is 100% computer tested at 3 points in the remanufacturing process to ensure great performance.
• Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
• Improved over O.E. - Gears are redesigned with a stronger, less brittle material than O.E. to prevent premature wear, striping and breakage, thus extending the performance life.
• Motor magnets are 100% recharged for superior performance and reliability.
• New high-quality gaskets are used in every window lift unit to prevent water entry, thus eliminating failure modes related to water penetration.

• Replacing a clogged air filter can lead to increased horsepower and acceleration
• For optimal performance, change your air filter every 12,000 miles

• Problem Solver® powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.
• Full ball metal stud provides 360 degrees of smooth, consistent, rotational movement.
• Durable, all metal construction for longer life.
• A thick bar is used for added strength and durability.
• Wrench flats at the base of the stud allow for a positive hold and the use of sockets for quick and easy installation and removal.
• Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear.

Crystal clear Bluetooth capability

2 Gig Flash Drive for huge mass storage

MP3 Player

Rechargeable Lithium Ion Battery-6 hours of playtime Technologically advanced for the optimum in hands free and wireless enjoyment, this product offers it all. Our design incorporates lenses that are Polarized and 100% UV coated with Crystal Clear Bluetooth capabilities and MP3 Player. Our speakers are designed with the use of Binaural Technology for the richest listening experience. In addition to this you get a 2 Gig flash drive to store over 500 songs or any other mass storage need. Beautifully gift boxed, everything you need is included: carrying case, additional lenses, car charger, wall charger, USB cable and micro fiber cleaning cloth.

• Designed to increase horsepower
• Designed to improve throttle response and engine sound
• Replaces entire factory air intake system
• Lasts up to 100,000 miles before service is required, depending on driving conditions
• Installs in as little as 90 minutes

• Flat washers, split lock washers, fender washers, fiber washers and many other types available
• Manufacturing materials include steel, stainless steel, nickel alloy, and more
• Conveniently packaged in a variety of sizes, assortments, and quantities
• Also suitable for a broad variety of household, industrial and commercial uses

• Comply w/U.S. Coast Guard Safety Standards
• Teflon Coated Shafts/Pump Arm For Max. Protection

• 8.8mm Graphite Suppression
• Silicone Spark Plug Boots
• 550 Degree Double Silicone Construction
• Fiberglass Braid
• Carbon/Graphite Core
• Magnetic Suppression
• Fiberglass/Kevlar Core
• 500 Ohms Resistance

• Original Equipment fit and form
• Dependable stopping power
• Single-layer shim absorbs noise and vibration for consistently quiet braking
• Limited Lifetime Warranty

• The Intermotor brand has built its reputation by engineering and distributing a full line of genuine import parts - parts that are unrivalled for quality, original look, fit, form & function, as well as coverage.
• Carefully constructed with brass and high temperature plastic housing to OEM specification for precision fit and performance
• Special designed thermal elements for improved performance
• Our EGR products contain feature rich design and componentry yielding market leadership performance
• BWD is a global manufacturer of emission components, complete quality control is maintained through the manufacturing process from componentry to finished product
• Warranty: 3 years/36,000 miles

• 100% full-function, computer testing under simulated extremes of heat, cold, shock & vibration ensures unit will function under real-life conditions.
• 100% resolder of critical components ensures superior electrical connections, no intermittent failures and longer product life.

• Wagner ThermoQuiet NAO Disc Pad
• IMI sound insulator - "one-piece design"
• Wagner EDGE laser-shaped friction

• DA6, HR, HD, R4, V5 & HT6 Compressors
• Clutch hub/plate remover
• Metric fine thread
• High quality construction

• Clean Wheels
• Ultra-quiet
• No Break-in Needed
• Extremely Rotor Friendly
• Vehicle-Optimized Ceramic Formulas
• Ultimate upgrade for OE semi-metallic and low metallic brake pads

• Direct replacement for proper fit and function every time
• Housing made of high-quality plastic
• Designed to match the appearance of the original switch
• Driver’s side master switch as well as passenger and rear left and right switches available

• Great for gasket removing, disc brake finishing and metal polishing
• Coarse grit
• 2.1 " x 4.77"

• Micro-Finish sleeving of valve housing
• Factory Computerized-tested for safety
• OE-grade Seals and O-rings
• Premium OE quality bearing
• Centreless polished shafts

• Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
• Advanced rust-inhibiting finish for long-lasting durability
• High-performance pump section assembly provides superior performance
• Leading-edge inlet design to reduce friction and increase performance
• Gradient density strainer designed for better contamination resistance

In North America, Bosal designs, develops, and manufactures original equipment exhaust systems for carmakers such as GM and Ford. Bosal supplies OE service products to many import / transplant carmakers including VW, Honda, Volvo, Subaru, and Mazda. Bosal also develops high performance exhaust for OEM port of entry and dealer programs.

Bosal pioneered the manufacture of one-piece, direct-fit replacement exhaust systems more than twenty-five years ago. Today, Bosal remains the leader in direct-fit exhaust systems for import vehicles, and has expanded their program to include direct-fit catalytic converters for both the import and domestic aftermarket. Included in the catalytic converter program is their new line of Bosal Super-Cats and our most recent addition - Bosal's line of CARB Approved Catalytic Converters.

Product Features:

• Exhaust accessory that enables a complete installation process.

• Out-of-the-Box Bolt-On Performance
• Hand-Blended Intake and Exhaust Bowls
• CNC-Matched Intake/Exhaust Ports in Std Location
• Thicker Deck Surfaces than Other Brands

Omix-ADA is more than just a parts manufacturer, they're a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world's roughest terrain for about two decades. Omix's team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you.

Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

• Problem Solver® powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.
• Problem Solver® patented cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life part.
• Exclusive cover plate protects against contaminants leaking into the bearing surface.
• MOOG® engineered steel composition results in a stronger component. Full ball metal stud provides 360 degrees of smooth, consistent, rotational movement resulting in more responsive steering.
• An enlarged ball joint receptacle in the lower control arm can cause a loose ball joint fit. MOOG® Problem Solver® design includes an oversized housing for a more secure fit.
• Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear.

• Wagner ThermoQuiet NAO Disc Pad
• IMI sound insulator - "one-piece design"
• Wagner EDGE laser-shaped friction