1/4" Hole Saw Arbor Pilot Drill to Manual Transmission Rebuild Kit, Includes Syncros

1/4" in diameter
High speed steel
For general cutting of wood and metal For use with saw arbors MLW49-56-7010 and MLW49-56-7150. One per package,

Used in wet sanding, fine featheredging or last final sanding step before priming

Most flexible backing with more consistent scratch pattern make this 3Ms best wet sanding product

Abrasive Mineral type: Aluminum Oxide

FEPA grade: P320

Corrosive resistant and laser engraved every 120 degrees
Extra recess depth and nose-down design
SureGrip hex design drives the side of the fastener, not the corner
Made in the U.S.A.
Lifetime warranty This deep swivel impact socket is .91" in diameter and 3.23" in length.

For use with Razor Primer gun and Legacy guns
Thread size: 3/8" npsm

Constructed of M-2 high speed steel for the best combination of strength, heat resistance, and wear resistance
Standard 118 degree point for use in wood, metal, and plastic
Overall length: 3-9/16"

SuperKrome finish provides long life and maximum corrosion resistance

SureGrip hex design drives the side of the fastener, not the corner

Made in the U.S.A.

Lifetime warranty This 6 point socket has a 1.07" diameter and is 1.5" in length.

SuperKrome finish provides long life and maximum corrosion resistance

Through-hole design, simply pop the old bit out and insert a new replacement bit

Working angle up to 30 degrees

New bit holder design is 9 times stronger and helps prevent the bit from slipping out of the socket while working

Lifetime warranty

453666 Point Deep Fractional Impact Sockets, 3/8" DriveDescription: 1/2" Deep ImpactDiameter: 0.75Length: 2.50

Suregrip hex design drives the side of the fastener, not the corner
Open end is angled 15 degrees for greater access
Box end design features a 15 degrees offset head for clearance
Made in the U.S.A.
Lifetime warranty This combination wrench has a 2.00" diameter and is 18.38" in length.

8961 Impact Sockets 100% Made in the U.S.A. - Made entirely in the U.S.A., featuring quality workmanship and value. SureGrip Hex Design - The patented SureGrip hex design drives the side of the fastener, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. Improved Coating - The new black coating retains more rust preventative compound than black oxide. 6 Point Standard Metric Impact Sockets, 3/8" Drive Description: 11mm Standard Impact Diameter: 0.69Length: 0.88

Corrosive resistant
Laser engraved every 120 degrees
SureGrip hex design drives the side of the fastener, not the corner
Made in the U.S.A.
Lifetime warranty This 6 point standard socket has a 2.13" diameter and is 2.25" in length.

Forged from the finest chrome molybdenum alloy steel - the best choice for strength and durability
Radius corner design - to extend the life of fasteners
The design drives the side of the fastener not the corner
Provides increased strength, but also avoids rounding of rusted or damaged fasteners
Fully guaranteed No doubt, Sunex tools offer one of the most complete and toughest Impact Socket lines around. This 1/2" drive, 15mm standard 6 point universal impact socket is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job. Also it features a radius corner design, causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners, resulting in less wear on the fastener.

Forged from the finest chrome molybdenum alloy steel - the best choice for strength and durability
Radius corner design - to extend the life of fasteners
The design drives the side of the fastener instead of the corner
Provides increased strength, but also avoids rounding of rusted or damaged fasteners
Fully guaranteed No doubt, Sunex tools offer one of the most complete and toughest Impact Socket lines around. This 3/8" drive 3/4" universal 6 point socket is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job. Also it features a radius corner design, causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners, resulting in less wear on the fastener.

Forged from the finest chrome molybdenum alloy steel - the best choice for strength and durability

Radius corner design - to extend the life of fasteners

The design drives the side of the fastener instead of the corner

Provides increased strength, but also avoids rounding of rusted or damaged fasteners

Fully guaranteed No doubt, Sunex tools offer one of the most complete and toughest Impact Socket lines around. This 1/4" drive 5/16" deep 6 point socket is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job. Also it features a radius corner design, causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners, resulting in less wear on the fastener.

Designed with ease of installation in mind, MagnaFlow's direct-fit converters are the perfect compliment to your OEM exhaust system. With no welding, cutting or bending required, you can easily add one of our direct-fit converters to your vehicle when it's time to replace your original catalytic converter

Designed with ease of installation in mind, MagnaFlow's direct-fit converters are the perfect compliment to your OEM exhaust system. With no welding, cutting or bending required, you can easily add one of our direct-fit converters to your vehicle when it's time to replace your original catalytic converter

These days, the DIY or do-it-yourself crowd is all about creating custom work and one-off exhausts are no exception. Whether you're working on a classic car, race car or just your daily driver, a MagnaFlow universal converter should be the standard building block for your custom exhaust. Since these items are universal, some modifications may be involved such as cutting or welding.

S18103/8 Basic Size TRU-FLATE/PARKER style interchange series. P-style plugs are case hardened steel and treated to resist rust. Thread type: Female NPT size: 1/4 Max air inlet pressure: 300 PSI Selas: BUNA-N Threads: NPT

For most auto and light truck radial tire emergency repairs

Box of 20Use with our tire repair kit.  You can repair punctured tire while on the wheel.

Apart of Engine Cylinder Hone
Contains replacement stones and wipers 80 Grit Stone/Wiper Set for the 15000 brought to you by Lisle!

  Run time is a minimum of 80 minutes
Uses the same 14V (pod style) batteries that many other Makita cordless tools use
Battery and charger sold separately
Retractable skyhook
Shock absorbing body This fluorescent automotive worklight is great for automotive and camping.

Glass clip attaches to visors, purses, belts and pockets

Made in the U.S.A.

Trim length: 1/2"
3 x 7 rows

Consists of 1 each of the following: 6" mill file, 10" mill file, 8" bastard file, 8" half round file and 8" round file.

Blade width: 1/2"
Blade Length: 19"
Overall Length: 25"

Air craft quality aluminum
Quick blade change
Ultra portable
Lanyard included to attach to your key chain Other Mini-Knives Available - Sold Separately: SPN801 -- Silver SPN802 -- Black SPN803 -- Blue SPN804 -- Red SPN805 -- Purple Full Sized Super Knife Available - Sold Separately: SPN901 - Silver SPN902 - Black SPN903 - Blue SPN904 - Red

The most complete Rebuild Kits in the manual transmission industry today. Each kit contains only the highest quality parts that meet or exceed OE specifications.

Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested. with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.

The most complete Rebuild Kits in the manual transmission industry today. Each kit contains only the highest quality parts that meet or exceed OE specifications.

The most complete Rebuild Kits in the manual transmission industry today. Each kit contains only the highest quality parts that meet or exceed OE specifications.