Fuel Pump Module Assembly to Rack and Pinion Boots

• Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
• Triple barb hose fitting provides superior, long-lasting seal
• Superior return porting for optimum fuel flow
• Enhanced pump to flange harness design provides worry-free electrical performance
• Ceramic sender card and float arm that utilizes vehicle-specific geometry to ensure accurate fuel gauge readings for each and every application
• Gradient density, dual zone filtration designed for better contamination resistance

• 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
• Exclusive rust-prohibitive finishing process extends unit life.
• Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
• New mounting nuts and washers ensure proper, hassle-free installation.
• All units are 100% vacuum tested to ensure reliable performance.

• Keeps the Rain Out
• Lets Fresh Air In
• Original Ventvisor Design
• Reduces Heat Build-Up in Cab
• Windows Can Be Left Partially Open
• Install with3M Adhesive Foam Tape
• No Drill Installation
• Limited Lifetime Warranty

SureGrip hex design drives the side of the fastener, not the corner

Made in the U.S.A.

Lifetime warranty This 6 point socket has a .88" diameter and is 1.46" in length.

Packaged in two tubes; one contains liquid steel/epoxy resin, and the other contains hardener - when mixed together in equal portions, the mixture becomes a compound

Use as an adhesive, laminate, plug, filler, sealant, and electrical insulator

Water-proof, petroleum, chemical and acid resistant

Super strong, non-toxic and safe to use Like metal J-B Weld can be formed, drilled, ground, tapped, machined, filled, sanded, and painted. It stays pliable for about 30 minutes after mixing, sets in 4-6 hours, and cures fully in 15-24 hours. It also resists shock, vibration, and extreme temperature fluctuations, and withstands temperatures up to 500 degrees F. J-B Weld bonds to virtually any combination of iron, steel, copper, aluminum, brass, bronze, pewter, porcelain, ceramic, marble, glass, PVC and ABS, concrete, fiberglass, wood, fabric paper - just about any porous and non-porous material.

• Black Polycarbonate Frame
• Smoke
• Single Lens
• ANSI Z87 2010

• Full front end coverage protects all painted surfaces
• Compliments today's aerodynamic shaped vehicles
• Installs easily with no drilling or tools
• Custom fit exactly to your vehicle

• Available in many head styles including round, flat, pan, oval, truss, and hex
• Slotted, Phillips, Hex, Square, and a multitude of other varieties available
• Thread varieties include Machine Screw, Sheet Metal Screw, Self-Tapping, and others
• A large selection of diameters, lengths and quantities available in different assortments and/or kits

• Original Equipment Quality Parts
• Made in Korea
• Manufactured by ISO-14000, QS-9000, or ISO/TS-16949 certified suppliers

• Premium Unloaded/Semi-Loaded/Loaded
• OEM Grade Rubber Components
• Correct OEM Specified Piston Material
• Essential Mounting Hardware Included
• Exclusive Rustproof Coating

• This pump is used on accessory belt driven applications
• Used mostly on models equipped with a fan clutch
• It is highly recommended that the fan clutch be replaced at the same time as the water pump
• All gaskets or seals necessary for installation are supplied with pump
• Durable housing features precisely-machined mounting surfaces for proper sealing

• 100% exhaustive multipoint quality and performance testing ensures cranking and starting performance under virtually all temperature extremes
• 100% replacement of all bearings/bushings with new high-quality friction-reducing components provides balanced high-speed torque for maximum performance and dependability
• Armature/commutator is remachined to tough concentricity standards to help increase brush life and maximize starting power
• Solenoids include 100% new high-temperature caps, contacts, copper windings and terminal hardware which results in less battery draw which thus results in faster starts with maximum voltage

• Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
• Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
• FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
• Every part for the repair procedure is included in the kit unless otherwise noted

• Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
• Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
• FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
• Every part for the repair procedure is included in the kit unless otherwise noted

• Manufactured by the original equipment part supplier to insure proper form, fit, and performance.
• Internal "round spring" technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
• Installation instructions included.
• Durable Steel Pulley for long service life and performance.
• Professional Mechanics will change this tensioner in about 1+ hours.
• Due to the fact that belts and tensioners have similar Original Equipment "design life targets", it is often a best practice to replace the belt tensioner when replacing a worn or broken belt. Belt removal is required to change the tensioner. Therefore doing both together will extend accessory drive life and lower overall labor versus performing these services separately.

• The Intermotor brand has built its reputation by engineering and distributing a full line of genuine import parts - parts that are unrivalled for quality, original look, fit, form & function, as well as coverage.
• As a global manufacturer, Our has complete control of the manufacturing process from componentry to finished product
• Our ABS sensor line has complete coverage for domestic and import applications
• Over 1500 ABS numbers cataloged - and growing
• Our ABS sensors are engineered for precision performance, durability and a long service life
• Featuring the broadest sensor coverage in the market, we meet the service professionals needs with the highest quality product every time he opens the box
• BWD is a global manufacturer of emission components, complete quality control is maintained through the manufacturing process from componentry to finished product
• Warranty: 3 years/36,000 miles

• Majority of OHC or DOHC heads are supplied with Cam, Rockers, Lifters.
• Spartan Cylinder Heads meet or exceed OEM specifications
• Surfaces are cut, not ground to ensure proper sealing
• All heads are Vacuum tested to ensure all vales are sealing
• Shipped in Plastic Tubs for damage free shipping and core return