Ignition Knock (Detonation) Sensor to Front Tube Door

For more than a century, Delphi has been making the parts cars are born with - often developing new technologies in the process. Delphi is proud of its OE heritage, and over the years they’ve used that experience to expand into a global aftermarket supplier.

Product Features:

• Manufactured to meet or exceed OE requirements
• Delphi Knock Sensors help maximize engine performance with all fuels
• Delphi Knock Sensors prevent against engine damage from pre-ignition knocking.

Routine Maintenance > Filters > Fuel Filters

Bosch Premium Oxygen Sensors with OE SmartLink™ provide the closest match to the original equipment manufacturer's sensor performance. Each sensor is manufactured with a 2' length of sensor wire to allow for maximum replacement of worn wire.

Remanufactured in the U.S.A. for optimum performance and fuel economy, Tomco brand throttle body injectors are renowned as the ultimate replacement for your vehicle's original equipment. Completely disassembled and cleaned, every component is thoroughly evaluated. Non-qualifying components are replaced and design flaws corrected based upon our extensive research. Every throttle body injector is flow tested to simulate actual vehicle conditions and adjusted to the original equipment manufacturer's specifications. Experience and care assures that you will receive the highest quality throttle body injector which meets or exceeds the performance of your vehicle's original equipment.

Direct replacement Wheel Cylinders are designed to fit specific vehicle applications and to ensure a proper fit every time. Normal wear may cause piston seals to leak. Corrosion and pitting can also occur inside Wheel Cylinders as moisture builds up in the brake fluid. A leaky Wheel Cylinder can be dangerous to the driver, causing gradual softening of the brake pedal and creating brake pull to one side.

Product Features:

• All Wheel Cylinders are made with high quality EPDM rubber cups and boots for long lasting performance
• Wheel Cylinder bores are surface tested to ensure an optimum sealing surface for the pressure cups
• Due to repair time and cost, it is more desirable to replace instead of repair Wheel Cylinders
• Recommended replacement is suggested when servicing drum brake

Dorman’s Windshield Wiper Motor Transmission is resiliently constructed to withstand the strain of clearing heavy snow or ice from the windshield. It’s also a great value - save time, money and labor by replacing only the wiper transmission, not the entire windshield wiper motor assembly.

Product Features:

• Some models come with aluminum Dorman-engineered mounting brackets to correct weaknesses in the original plastic construction
• All necessary wiper arm mounting hardware, crank arms, dust covers and mounting grommets are included (where applicable)
• Direct replacement for a proper fit every time
• Tested to ensure trouble-free installation and performance

Extreme temperature resistance. Engineered with micro-sealing technology to provide a positive seal. Premium materials for durability.

Designed to provide enhanced endurance and maximum contamination exclusion while ensuring proper fit, form and function.

Wells Vehicle Electronics is a leading global supplier of advanced vehicle electronics solutions for original equipment and replacement applications. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability. Wells offers extensive application information and technical support.

Accessories, Body & Wipers > Windshield, Doors & Windows > Lifts, Latches & Handles

Factory Air blower motors meet or exceed original equipment specifications.

Air, Fuel, Emission & Exhaust > Carburetors & Intake Manifolds > Carburetors

MagnaFlow's universal tailpipes are available for various applications including Chevrolet / GMC, Dodge and Ford trucks. Available in diameters ranging from 2.5" to 4" in both single and dual exit, and backed by MagnaFlow's lifetime manufacturers warranty, these universal tailpipes are the perfect addition to your truck.

Brakes, Steering & Suspension > Brake Hardware & Components > Brake Hardware

BWD relays are manufactured to meet or exceed OE performance.

As the most heavy duty car covers on the market, the WeatherShield HD car cover is built to handle the most intense weather and climates. Toughest of the tough, the WeatherShield HD car covers are constructed from 40% heavier fabric and stronger thread providing double the tear strength, double the tensile strength. Proprietary processes place a specially formulated finish inside the fabric, bonding each individual thread so there is virtually no space between them for water or dirt or pollutants to enter. The WeatherShield HD may not be as silky-smooth as other car covers, but it will out perform them in harsh climates! Designed as a long-term storage solution. Comes with a 5-year warranty.

Product Features:

• The most heavy-duty car cover on the market
• Specially treated to resist fading and color transfer
• Sheds water and blocks out dust
• Outsmart the outdoors!
• 5-year warranty

Have you noticed the small filter located in the air filter housing? Have you ever wondered what it’s for? Or have you possibly thrown it away? That small filter is known as a breather. Breathers, also known as emission control filters, filter fresh air that’s drawn into the engine’s crankcase. Because the engine must breathe to purge itself of fuel and water vapors, breathers are used in conjunction with the PCV valve. Although small in size, Purolator breathers are big in importance. Like any other filter, the breather is used to trap harmful contaminants and prevent them from damaging the engine. Failure to change the breather will allow unfiltered air (with all of its contaminants and dirt) to be drawn into the engine crankcase which can cause engine damage. Generally, the breather element should be changed every 12,000 miles - however, check with your vehicle manufacturer's recommended change interval as it may vary. The simplest recommended plan of preventive maintenance is to change the breather element at the same time the air filter is changed. This eliminates trying to juggle and anticipate two different change intervals, and it's convenient because you'll be able to access two filters in the air filter housing at once. Not all vehicles are equipped with a breather element. Use the Purolator Application Guide or contact the Pros to find out if your vehicle has a breather. If it does, visit your favorite automobile parts retailer and ask for a Purolator breather filter today!

Product Features:

• Traps harmful contaminants
• Prevents harmful contaminants from damaging the engine

The Evolution/Technalon car covers are made with Kimberly-Clark Evolution4 material, a non-woven polypropylene fabric that provides maximum protection in all weather conditions. Evolution car covers have a strong outer layer and the softest inner layer for gentle protection of fine paint finishes. Evolution has the highest UPF rating, which blocks harmful UV rays. The tough exterior withstands acid rain, airborne pollutants, bird droppings, anything that can damage your vehicle’s finish. It also provides an impact resistance shield. Breathable core layers are dust and moisture resistant, allowing air and vapor circulation. The super soft interior layer protects your paint finish. Comes with a 4-year warranty.

Product Features:

• Four layers thick to prevent dents and dings
• Excellent dust and pollution protection
• Insulates vehicle against weather
• Strong Polypropylene fibers

Cooling & Heating > Thermostats, Gaskets & Housing > Thermostats

Engineered from premium-quality materials specific to the application. Includes gaskets for all major components based on the OE set contents. Head bolts sold separately.

This OE-quality replacement halogen bulb offers basic performance.

Product Features:

• Legal for on-road use
• OE quality
• Lights dim over time
• Replace lights in pairs

Tire Covers by Bestop are offered in a multitude of colors to fit your vehicles color scheme. Seven custom sizes sewn with industrial strength thread. Sewn in elastic band allows for a snug fit. Premium fabric with cotton backing that is a perfect color match to factory original colors.

Product Features:

• Made From Premium Fabric
• Seven Custom Sizes
• Colors Can Be Silkscreen
• Industrial Strength Thread
• Sewn In Elastic Band
• Allows for A Snug Fit
• Mildew Resistant

Meets OEM specifications. Correct form and fit. Built with today's technology. Improved wear surfaces.

While we do not sell this item online, it can be ordered from one of our 3,500 store locations. Please see our Store Locator to find the store nearest you.

Please note: online promotions and discounts are not applicable to this item.

If Quality, Reliability, and Customer Service are important to you, then Spartan Engines are the way to go. Our highly skilled team of Builders and Corporate Executives combine to provide a level of quality and customer service that is unmatched in the industry. Spartan is proud to be the ONLY remanufacturer to maintain the prestigious ISO/TS 16949 quality seal, an internationally recognized symbol of quality. When it comes to product offerings, Advance Auto Parts strives to provide our customers with the very best. That's why it's no surprise that Spartan is exclusively sold through Advance Auto Parts Stores Nationwide.

Product Features:

• 30 years experience
• Quality Workmanship
• All Technical updates done
• Only OE quality or better parts are used

Provides a center wire platinum firing tip. Benefits include reduced gap erosion, fewer misfires, enhanced performance and improved durability.

Product Features:

• OE Approved
• Platinum ball on the center electrode helps minimize gap erosion for longer life
• Platinum ball welding process provides a consistent point of contact for enhanced adhesion
• Designed for fewer misfires and reduced gap erosion
• Works to optimize engine performance and provide improved fuel economy

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank straps meet or exceed the performance of the original equipment they replace.

Product Features:

• Unit is designed to OE fit, form and function requirements accomplished by leveraging our expertise
• Direct fit ensures safe, secure fuel tank installation
• Product individually packaged and labeled to help reduce product damage prior to installation
• Industry leading coverage on straps for plastic tanks

BWD sensors are manufactured to meet or exceed OE performance.

Accessories, Body & Wipers > Auto Body Parts > Door Parts