Alternator - Remanufactured - 110 Amps to Engine Load Leveler

This alternator has been computer load tested and mechanically and visually inspected. Designed, manufactured and assembled to promote improved long-term reliability.

Air, Fuel, Emission & Exhaust > Carburetors & Intake Manifolds > Carburetors

Wells Vehicle Electronics is a leading global supplier of advanced vehicle electronics solutions for original equipment and replacement applications. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability. Wells offers extensive application information and technical support.

HYDRAULIC - Xtreme Energy: Strong torque thru low end and mid-range, good idle.

Product Features:

• HYDRAULIC - Xtreme Energy: Strong torque thru low end and mid-range, good idle.
• 256/268 Advertised Duration, 212/218 Duration @ .050", .477"/.484" Lift, 110 Lobe Separation
• Valve spring upgrade required
• 289-302 Firing Order

Restore and maintain the quick, easy opening of your hood with Dorman’s Hood Release Cable. Constructed of high-quality stainless steel, it naturally resists corrosion. Plus, it’s engineered to counteract the wear and tear that can lead to snapping and sticking.

Product Features:

• Comes with handle (where applicable)
• Direct replacement for a proper fit every time
• Durably designed to resist breakage
• Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards

Rancho RS9000XL shocks are adjustable with 9-position manual/remote tuning. This allows you to select the type of ride you want, including on- and off-road. Comes with a protective boot, nitrogen gas charging and a liquid metallic finish.

Dorman’s Engine Expansion Plugs are available in multiple styles, including Cup Type, Pilot Seal, Reverse Taper, Concave, Quick-Seal® Rubber and Quick-Seal ® Copper. Our uniquely designed Pilot Seal Expansion Plug ensures a leak-proof fit. We also offer Engine Expansion Plug Kits.

Product Features:

• Many sizes available
• Conveniently available in packs of different quantities
• Constructed from high quality steel, copper, brass, or rubber
• Dorman’s Engine Expansion Plugs are constructed to strict engineering quality standards

Autolite® Professional Series Wire Sets are designed to meet or exceed OES design requirements. The high-tech nylon reinforcement in the wire provides increased terminal retention and improved jacket adhesion. The tougher silicone jacket is less likely to tear away from the insulation.

Product Features:

• Designed to meet or exceed OES design requirements
• High-temperature, moisture proof, silicone boots
• Increased terminal retention and strength properties
• Features necessary accessories, silicone content and boot designs

BWD switches are manufactured to meet or exceed OE performance.

BWD headlight sockets are manufactured to meet or exceed OE performance.

Engineered from premium-quality materials specific to the application. Includes gaskets for all major components based on the OE set contents. Head bolts sold separately.

Solenoids, bushings and brushes replaced 100% new. Cases are cleaned, shot-blasted and painted. All units are 100% load tested to OEM specifications on state-of-the-art computerized equipment.

While we do not sell this item online, it can be ordered from one of our 3,500 store locations.

Please see our Store Locator to find the store nearest you. Please note: Online promotions and discounts are not applicable to this item.

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road. We are committed to remanufacturing transmissions to the same standards and methodologies used for OEM transmissions.

Each Moveras transmission is produced in a World Class manufacturing facility. Our entire process has been developed from scratch, utilizing LEAN manufacturing principles. Our transmissions are produced in a Clean Room environment. Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

Laser-welded iridium center electrode is resistant to heat, corrosion and electrical wear. The tapered ground electrode minimizes quenching. Provides outstanding acceleration, high fuel efficiency and durability.

Product Features:

• 0.6 mm iridium-tip center electrode provides durability and a high melting point
• Taper-cut ground electrode shape provides improved flame reproduction

Brake Cables are responsible for application of the parking or emergency brake. When failure occurs, Brake Cables need to be replaced for the vehicle to pass state inspections. Tru-Torque Brake Cables are direct replacements parts.

Product Features:

• Inner cables are sheathed and lubricated to provide longer life and improved performance
• Flexible casings are completely covered with conduit to prevent corrosion of interior cables
• Zinc plated fittings and clips prevent corrosion
• Brackets included where applicable

K&N replacement air filters are ideal for extended use in dirty and dusty off-road riding and provide clean carburetion even at high altitudes. As a rule, no jet changes are required with just a K&N filter element. K&N replacement air filters are washable and reusable and provide high airflow with excellent filtration.

Product Features:

• Designed to increase horsepower and acceleration
• Designed for extended use in dusty conditions
• Washable and reusable lifetime air filter
• Cleanable with K&N Filter Cleaner

Provides OE-quality filtration. Driveworks gaskets are designed to keep your pan gasket in place during installation. Includes trilingual instructions.

Designed to meet the increasing demands of today's engines. Each of our oxygen sensors is constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each Denso sensor.

Provides OE-quality filtration. Sure Hold gaskets are designed to keep your pan gasket in place during installation. Includes trilingual instructions.

Gardner-Westcott has taken care of the task of identifying thread pitches, diameters, lengths and grade requirements, etc., so the only thing left for you to do is select your kits. Years of research and knowledge regarding fasteners, coupled with the expertise that comes from many customizing projects, has enabled Gardner-Westcott to achieve this. The kits range from a simple point cover set, or head studs for Norton’s, to what Gardner-Westcott calls "fender to fender" detailing. Gardner-Westcott kits are absolutely complete as they have you in mind when created and contain nuts, flatwashers, lockwashers and other essential items for you to complete your project.

Tools, Fluids & Garage > Hardware, Belts & Hoses > Fasteners

Bushings and bearings are replaced 100% new. All units are 100% load tested to OEM specifications on state of the art computerized equipment. Cosmetically attractive with plated hardware and bright aluminum.

Beck/Arnley partners with wholesale distributors, who service jobbers, and retailers to deliver parts made right for technicians. These technicians service the maintenance and repair market for foreign nameplate vehicles. Beck/Arnley is the import brand supplier of premium, quality import parts for cars, light trucks and SUVs. They source one part at a time by each application, finding the best part for a specific model and year.

Whether Asian or European vehicles, Beck/Arnley provides OE quality parts from around the world, from over 400 manufacturers working with a database of 800 sources. Beck/Arnley product specialists and experienced sourcing experts follow a unique research, analysis and procurement process known as Application Specific Sourcing. Using proven global sourcing expertise, they source parts from the OE supplier or approved manufacturer to supply their distributors. Beck/Arnley delivers exceptional value to service technicians.

Spectre's Magna-Clamp hose fittings feature a two-piece aluminum housing with a built-in stainless steel gear drive clamp that provides secure tightening at a fraction of what any "AN-type" fitting would cost. They are ideal for race, street or show.

Product Features:

• 1" I.D. Heater/Water hose. Also fits #20 AN hose.
• Fitting I.D.-1.50". Two-piece Red/Blue anodized aluminum housing with replaceable stainless steel gear drive clamp

WeatherTech Side Window Deflectors offer fresh air enjoyment with an original equipment look. They are crafted from the finest 3mm cast acrylic material available. Installation is quick and easy, with no exterior tape needed. WeatherTech Side Window Deflectors do not stick to the outside of your vehicle. They install inside the window channel. These low profile window deflectors help to reduce wind noise and allow interior heat to escape, even when it is raining.

Product Features:

• Our light tinted Side Window Deflectors are the only deflectors in the world made with a D.O.T. approved (U.S. Department of Transportation) glazing material.

Routine Maintenance > Belts & Hoses > Belt Components

Designed to hook to a crane or hoist to handle and position large, bulky components
The horizontal tilt can be adjusted to compensate for off-center loads, or adjusted to a certain angle for a component being positioned
1,500 lb. capacity