Carburetor - Remanufactured to Custom Fit Car Cover - Evolution, Gray

• 100% resolder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
• On-car vehicle validation testing ensures that modules meet all fit, finish, functionality and durability requirements.
• All modules are 100% computer tested to ensure reliable operation.

• BWD is an aftermarket leader, providing a premium line of engine management products. We are constantly evolving to give BWD customers the competitive edge they need to compete in today’s ever-changing marketplace.
• Our has complete control of the remanufacturing process from componentry to finished product
• 100% Computerized Testing for all sensors using advanced test equipment
• Common component failures are 100% replaced
• Upgraded components are used to improve circuit reliability and performance
• Warranty: 3 years/36,000 miles

• Sealed Main Body Prevents Rusting From Inside Out
• Open Back End On Receiver For Easy Cleaning
• One-Piece Collar Reduces Rust And Ensures Strength
• Exceeds V-5 Standards
• Exceeds V-5 Standards
• Robotic Welding For Superior Strength And Fit
• Limited Lifetime Warranty To Original Purchaser

• Exact Fit OE Replacement
• Rollover valve improves safety during crash
• Metal tubes in Delphi hangers are routed so as to not contact the tank or vehicle underbody at any point eliminating noise and vibration during vehicle operation
• Ceramic resistor card means enhanced accuracy and durability
• Stainless steel sender base material results in greater durability and appearance

• Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
• Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
• FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
• Every part for the repair procedure is included in the kit unless otherwise noted

• Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
• Lock ring included with each tank to reduce installation time and to ensure a complete repair
• Made with corrosion resistant, OE approved, Ni Terne steel for durability
• Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
• Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
• Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
• Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
• Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation

• All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction
• Full Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride
• Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
• 1-3/8" Bore: Lower operating pressure than standard 1" bore units
• Unique Groove Tube - PSD: Precision tapered grooves in the pressure tube perform like an additional stage of valving for optimum ride tuning.
• Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
• 5/8" Piston Rod: Heavy-duty nitrocarburized rod for long service life. On non-dust shield units only
• Special Seal: "Self-lubricating" fluid seal designed to retain gas without excessive wear or friction.

• Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE expertise
• Durable powder coating applied to exterior of oil pan for a long lasting rust free unit
• Washed and then sealed with an anti-corrosive spray on the interior for a rust free unit at installation
• Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
• Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
• Road tested to ensure real world performance and to verify that each designs meets our high standards for quality
• Coating salt spray tested for over 200 hours to insure durability

• Industry Leading Touch-Up Paint Technology
• Duplicates Original Nissan Colors
• Roller Ball Tip Ideal For Precision And Control
• Taper-Tip Brush Ideal For Large Coverage
• Dry To Touch In 20 Minutes / Handle In 40 Minutes
• Clear Coat Needed To Match Original Factory Finish

• Galvanized steel construction
• Restricted flow control
• Extended fitting
• Shouldered hex design

• Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
• Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
• FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
• Every part for the repair procedure is included in the kit unless otherwise noted

• OE Pump Kit
• OE Form
• OE Function

Federal-Mogul engineers have extensive experience in designing components to accommodate changes in the engine due to wear. By leveraging this expertise, Sealed Power components ensure unmatched performance and reliability. In fact, Sealed Power's full range of engine components incorporate advanced in-house engineering and machining technologies combined with proprietary metallurgies that can improve fuel economy, reduce emissions and add durability to both gasoline and diesel engines.

Professionals trust Sealed Power components for both premium passenger car and light truck rebuilds. They meet or exceed the industry's toughest standards. Rely on Sealed Power products for your next engine rebuild or repair.

• Replacement Part
• For Street Scoop
• Shaft and Butterfly Plate Kit

• Cardone Select Engineered (CSE) Technology ensures that all master cylinders meet or exceed O.E. form, fit and function.
• Life-cycle testing ensures that every master cylinder exceeds S.A.E. stroke requirements.
• All cylinder bores are micro-finished to precise specifications to dramatically reduce wear and promote long service life.
• Seals are temperature-cycled from -30°F to +220°F to ensure leak-free, reliable performance under harsh under-hood conditions.
• EPDM seals and O-rings meet O.E. quality standards to ensure reliable, leak-free performance.
• Rubber components are tested to comply with stringent S.A.E. specifications.
• Aluminum castings are designed to precision tolerances to ensure like-new performance.
• Aluminum castings are designed to precision tolerances to ensure like-new performance.
• Mounting components are included with every model for easy installation.

• Inner cables are sheathed and lubricated to provide longer life and improved performance
• Flexible casings are completely covered with conduit to prevent corrosion of interior cables
• Zinc plated fittings and clips prevent corrosion
• Brackets included where applicable

• Imperial Econo-Kool® tube and fin transmission cooler
• Size: 3/4" x 5" x 12-1/2"
• Sub-compact to compact cars
• GVWR up to 12,000 lbs.

• 100% resolder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
• On-car vehicle validation testing ensures that modules meet all fit, finish, functionality and durability requirements.
• All modules are 100% computer tested to ensure reliable operation.

• Four layers thick to prevent dents and dings
• Excellent dust and pollution protection
• Insulates vehicle against weather
• Strong Polypropylene fibers