Panel Type Cotton Gauze Air Filter to Custom Fit Car Cover - Polycotton, Gray

• Designed to increase horsepower and acceleration
• Washable and reusable lifetime air filter
• Offers high airflow with excellent filtration
• Lasts up to 50,000 miles before cleaning is required, depending on driving conditions
• Emissions legal in all 50 US states

• Legal for on-road use
• OE quality
• Lights dim over time
• Replace lights in pairs

• 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
• Exclusive rust-prohibitive finishing process extends unit life.
• Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
• New mounting nuts and washers ensure proper, hassle-free installation.
• All units are 100% vacuum tested to ensure reliable performance.

The KYB Strut-Plus means "OE-Plus" for your vehicle: The KYB Strut-Plus is a ready to install assembly that doesn’t require a special spring compressor to transfer parts. It’s OE-Plus because it’s designed to "restore" designed performance. That‘s better than using an OE replacement part because OE parts are designed for new vehicles, not used vehicles. The Strut-Plus goal is to help restore the vehicle’s Tire Control which affects vehicle stability, stopping distance, lane change responsiveness and overall handling. Every component in a complete strut assembly is critical to its overall performance: That’s why the KYB Strut-Plus only includes the highest OE or better components. At the heart of Strut-Plus is the Excel-G Gas Strut which is built on the same KYB OE assembly lines and is calibrated to compensate for wear caused by vehicle age & miles driven. Where applicable, the KYB Strut-Plus also includes a new coil spring, mount, insulator, bearing plate and attaching parts. The KYB Strut-Plus comes pre-assembled, saves time on installation, eliminates assembly errors and includes all necessary components to get the job done right; the first time.

Product Features:

• Where applicable: An improved, new coil spring that resists metal fatigue as much as 600% more than competitors and uses baked-on, powder coated paint to reduce rust & corrosion
• Where applicable: Includes hard to find, OE quality bearing plates and insulators
• Where applicable: A protective boot and bumper

• Available in many head styles including round, flat, pan, oval, truss, and hex
• Slotted, Phillips, Hex, Square, and a multitude of other varieties available
• Thread varieties include Machine Screw, Sheet Metal Screw, Self-Tapping, and others
• A large selection of diameters, lengths and quantities available in different assortments and/or kits

Professional technicians trust and value MOOG because of their reputation for solving problems. Vehicle owners who use MOOG parts enjoy responsive handling and the return of a "like-new" feel to their steering. And for more than 40 years, every NASCAR Cup champion has relied on MOOG ball joints for performance and durability.

Federal-Mogul MOOG chassis parts improve upon existing designs to deliver a "problem-solving" replacement product. MOOG is constantly working to develop new products that improve steering performance. The innovations Federal-Mogul engineers develop for the track, are reapplied for the street. Federal-Mogul has been the recognized leader in steering solutions for NASCAR for years.

In North America, Bosal designs, develops, and manufactures original equipment exhaust systems for carmakers such as GM and Ford. Bosal supplies OE service products to many import / transplant carmakers including VW, Honda, Volvo, Subaru, and Mazda. Bosal also develops high performance exhaust for OEM port of entry and dealer programs.

Bosal pioneered the manufacture of one-piece, direct-fit replacement exhaust systems more than twenty-five years ago. Today, Bosal remains the leader in direct-fit exhaust systems for import vehicles, and has expanded their program to include direct-fit catalytic converters for both the import and domestic aftermarket. Included in the catalytic converter program is their new line of Bosal Super-Cats and our most recent addition - Bosal's line of CARB Approved Catalytic Converters.

Product Features:

• One Piece, Direct Fit Unit that eliminates the need for cutting, pipe bending, or welding.

• Tier 1 OEM / OES Supplier
• VR - 2 Material
• Sturdy facing material clinched to a perforated steel core
• Teflon coating to help seal surface irregularities, allow for gasket release and withstand hardware motion

Recognized by both the original equipment and the automotive aftermarket as an innovative, technologically driven organization, Dayco operates a fully integrated global network of technical facilities and sales offices employing a workforce of nearly 3,100. Dayco continues to be guided by the same primary business strategy established over 100 years ago: to anticipate and satisfy the needs of our customers by providing timely, quality products and services.

• 10 amp fast charge – self-adjusting charge rate for everyday charging needs and keeping your battery in peak condition.
• 2 amp slow charge – for charging and maintaining small batteries.
• 75 amp clamps – for top and side-mounted battery posts.
• Easy-to-feel button control switches for selection of Display Mode, Charge Rate or Battery Type.
• Retractable handle for easy portability and storage.

• Reduced spray variation, accurate fuel spray patter mean better emissions and cold start capabilities
• No internal seal rings equals minimized leakage
• Recessed fuel exit minimizing possible plugging
• Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock

ACDelco has over 100 years of experience in the automotive industry and is a brand of GM Customer Care and Aftersales, a division of General Motors. ACDelco employs a two- or three-tiered distribution model, utilizing a network of appointed wholesale distributors to service independent installers, ACDelco independent service centers, retail and fleet customers.

• The Intermotor brand has built its reputation by engineering and distributing a full line of genuine import parts - parts that are unrivalled for quality, original look, fit, form & function, as well as coverage.
• Our knock sensors are designed to respond to knock frequencies up to 1000 Hz accommodating shifts in engine knock frequency making it a more flexible sensor responding to correct engine knock over a broad range of vehicle conditions
• Manufacturing processes include an automated data acquisition system to continuously monitor the sensor output to ensure that it responds with appropriate voltage output at the specified frequency range
• All units are 100% tested using an accelerometer vibration test to ensure trouble-free operation
• Featuring the broadest sensor coverage in the market, we meet the service professionals needs with the highest quality product every time he opens the box
• BWD is a global manufacturer of emission components, complete quality control is maintained through the manufacturing process from componentry to finished product
• Warranty: 3 years/36,000 miles

• Wrap-Around Design for Sleek Aero-dynamic Appear.
• Made of Impact Modified Acrylic
• Car-Wash Safe
• Helps Prevent Damage to Hood
• Protects Windshield and Fenders
• No Drill Installation
• Limited Lifetime Warranty

• Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
• Lock ring included with each tank to reduce installation time and to ensure a complete repair
• Made with corrosion resistant, OE approved, Ni Terne steel for durability
• Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
• Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
• Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
• Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
• Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation

• Heat-Absorbing Material
• Separated By Aluminum Alloy
• Forces Heat Away
• Stops Vapor-Locking
• Also As A Mounting Gasket

• Full ball metal stud provides 360 degrees of smooth, consistent, rotational movement resulting in more responsive steering.
• Includes wrench flats for easier service.

• Save labor with easy installation methods
• Comes with grease and bands
• Rugged silicone or neoprene materials offer a high resistance to cracking, rotting and leaking
• The Speedi and Quick Boot are installed without special tools

• 100% resolder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
• On-car vehicle validation testing ensures that modules meet all fit, finish, functionality and durability requirements.
• All modules are 100% computer tested to ensure reliable operation.

• Good basic indoor protection
• Drill weave Polycotton blend
• Resists tears and punctures
• Treated to resist rot and mildew
• 90-day warranty