Dryflow Air Filter to Torque Strut Mount

K&N Engineering in Riverside California is the world's leading manufacturer of washable performance air filters and air intake systems. K&N invented the reusable high flow cotton air filter in 1969 and has been perfecting the technology ever since.

K&N is a world class filtration company selling air filters, oil filters, and air intakes in over 30 countries. K&N sells over 5,000 products designed for cars, trucks, motorcycles, engines, and industrial applications.

From their Million Mile Warranty to their Consumer Protection Pledge, K&N stands behind their products and their consumers 100%. The distinctive K&N logo represents performance from one of the original performance companies.

This alternator has been computer load tested and mechanically and visually inspected. Designed, manufactured and assembled to promote improved long-term reliability.

K&N 57i Series induction kits are specifically designed for each different vehicle and will free your vehicle from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the vehicle's RPM range. The extra surface area of the open-air air filter provides even more airflow at lower restriction than a K&N O/E replacement filter, which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt to increase its service life before a cleaning is required (up to 100,000 miles). The filter is either directly attached to the engine carburetor or throttle body or is attached indirectly through a tube assembly running from the filter to the engine. All adapters are made from high-quality materials such as steel, aluminum, silicon or reinforced nylon to ensure a long life. 57i Intakes are not legal for use in California and other US states that have adopted California emission standards.

Product Features:

• Designed to increase horsepower
• Designed to improve throttle response and engine sound
• Replaces entire factory air intake system
• Lasts up to 100,000 miles before service is required, depending on driving conditions
• Installs in as little as 90 minutes

SuperKrome finish provides long life and maximum corrosion resistance

Through-hole design, simply pop the old bit out and insert a new replacement bit

Working angle up to 30 degrees

New bit holder design is 9 times stronger and helps prevent the bit from slipping out of the socket while working

Lifetime warranty

Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:

• Forged housing provides exceptional strength and durability
• Oxidation film on the surface of the metal protects against corrosion
• Phosphated ball stud provides a smooth, durable and wear-resistant surface to extend service life
• Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination

The highly popular Noah car cover provides maximum all-weather protection at a great value. Outdoor elements are no match for these durable, lightweight covers. Made from proprietary materials and technology, these covers are in a class of their own. Noah car covers are uniquely constructed from industry leading Kimberly-Clark fabric. Protection begins at the inner layer, an impact-resistant polyethylene/nylon blend material that is ultra-gentle on your vehicle’s finish. Then, a central layer of micro-porous fabric repels water and dust, yet remains breathable so moisture vapor can escape. The outside layer of the car cover is constructed from a polypropylene/polyethylene spun bond material that is highly durable, heat-resistant and scratch-resistant. UV inhibitors make this cover great for extended outdoor use. Comes in silver-grey color. Backed by a 4-year warranty.

Product Features:

• High quality all-weather protection
• Kimberly-Clark's best outdoor fabric
• High-tech bonded 4-layer composite
• Film barrier technology
• 4-year warranty

SuperKrome finish provides long life and maximum corrosion resistance
SureGrip hex design drives the side of the fastener, not the corner
Made in the U.S.A.
Lifetime warranty. This 6 point flex socket has a .75" diameter and is 1.94" in length.

Shop Performance Parts > Air, Fuel, Emission & Exhaust > Exhaust Hangers & Hardware

For use with fuel level gauges and 5" - 26" deep tanks. Includes gasket and mounting hardware. Resistance specifications: Empty: 240 ohms. 1/2: 130 ohms. Full: 33 ohms.

Piston seals and sliders are lubricated to promote smooth operation. 100% new brake hardware to complete pad and caliper installation. All hydraulic connections are tapped to ensure proper installation.

Designed with ease of installation in mind, MagnaFlow's direct-fit converters are the perfect compliment to your OEM exhaust system. With no welding, cutting or bending required, you can easily add one of our direct-fit converters to your vehicle when it's time to replace your original catalytic converter

Dayco Molded Radiator and Bypass Hose with knitted reinforcement and all-synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants and temperature variations that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-2 requirements, this hose meets Type EC electrochemical requirements as specified in SAE J1684. Note: Heavy-Duty Truck Molded Radiator Hoses carry an SAE J20R4, Class D-1, Type EC Classification.

This OEM-quality replacement can be installed in as little as an hour using common hand tools. It makes use of the original holes and does not require the drilling of new holes. Interchangeable with OE wiring harness. Tested to fit your vehicle and function like the OE part. Fully legal and in compliance with all federal regulations.

Designed with ease of installation in mind, MagnaFlow's direct-fit converters are the perfect compliment to your OEM exhaust system. With no welding, cutting or bending required, you can easily add one of our direct-fit converters to your vehicle when it's time to replace your original catalytic converter

Our Xtreme-HD line of alternators and starters are designed to keep equipment up and running! The Xtreme-HD line is designed and built to meet the demands of severe applications. Whether you are pulling logs out of the forest or a full trailer across the country, Xtreme-HD starters and alternators are built to withstand the heat and stress to keep your equipment working hard.

Product Features:

• Manufactured to strict requirements, including 100% new replacement of all bearings, brushes and bushings. Ensuring a quality product each and every time.
• Stringently tested through our industry leading T3 testing procedure where individual components, sub assemblies and complete units are tested to meet or exceed OEM specifications.
• Enhanced design including the use of oil-impregnated bushings, synthetic lubricants and high temperature seals for optimum durability.
• One year unlimited mileage unlimited hour warranty

Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:

• Forged housing from specific materials provides strength and durability to prevent breakage
• Coated technology provides a smooth and durable surface to prevent corrosion and rust
• Premium Polychloroprene rubber boots are fitted with grease relief valves to prevent contamination
• A slotted nut and cotter pin for a more secure installation

This OEM-quality replacement can be installed in as little as an hour using common hand tools. It makes use of the original holes and does not require the drilling of new holes. Interchangeable with OE wiring harness. Tested to fit your vehicle and function like the OE part. Fully legal and in compliance with all federal regulations.

Removes rust, carbon and paint from metal and other surfaces. It is designed for heavy-duty use and consists of industrial tempered straight twisted wire 0.020"
Use with electric drills, pneumatic tools or flexible shaft equipment
Face diameter: 1"
Shank diameter: 1/4"
Maximum safe free speed: 20,000 rpm Caution: Wear eye protection.

BWD knock sensors are designed to respond to knock frequencies up to 1000 Hz accommodating shifts in engine knock frequency, making it a more flexible sensor that responds to help correct engine knock over a broad range of vehicle conditions.

Covercraft’s Multiband custom fit car cover is a mid-priced leader with quality and performance. Constructed with 3-layers of polypropylene material, the Multiband car cover is an inexpensive choice for indoor storage or limited outdoor usage. Protects your vehicle from moisture and dust. UV resistant to help keep your paint job looking fresh. Breathable fabric layers allow heat and condensation to evaporate away from your vehicle. Multiband car covers provide good, basic protection at an excellent price. Installs easily with an elasticized bottom seam you just draw tight around the bottom of your vehicle. The mid-weight material is easy to fold and store when not in use. Comes with a 2-year warranty

Product Features:

• Economical cover for basic indoor or limited outdoor protection
• Moisture, mold and UV resistant
• Will not scratch clean paint or clear coat, keeps vehicle clean from dust
• Lightweight and compact for easy storage
• 2-year warranty

Quick 1/2 turn on, 1/2 turn off Roloc disc fastening system

Use with 3M Roloc Disc Pad 05539

Best used on aluminum parts

Maximum operating speed: 25,000

2" Blue Very Fine

25 discs per box Used to quickly remove cut cork or paper gaskets and form in place gasket materials prior to the assembling of power train components.  Used for aluminum parts.

Beck/Arnley partners with wholesale distributors, who service jobbers, and retailers to deliver parts made right for technicians. These technicians service the maintenance and repair market for foreign nameplate vehicles. Beck/Arnley is the import brand supplier of premium, quality import parts for cars, light trucks and SUVs. They source one part at a time by each application, finding the best part for a specific model and year.

Whether Asian or European vehicles, Beck/Arnley provides OE quality parts from around the world, from over 400 manufacturers working with a database of 800 sources. Beck/Arnley product specialists and experienced sourcing experts follow a unique research, analysis and procurement process known as Application Specific Sourcing. Using proven global sourcing expertise, they source parts from the OE supplier or approved manufacturer to supply their distributors. Beck/Arnley delivers exceptional value to service technicians.

Product Features:

• All stabilizer links come with attaching hardware.
• Elastic stop nuts are used for most applications, but if a standard castle nut is used, a new cotter pin is supplied. This is because old nuts are often rusted and threads strip during removal.
• Maintain proper handling and vehicle control
• Minimize body roll and noise from worn links. Manufactured from quality materials for durability

Wearever Rotors are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design and non-directional finish that eliminates noise and enhances pedal feel. Wearever Rotors are designed to dissipate heat helping to eliminate brake fade and increase the life of your pads. Ready to install out of the box to save you time.

Product Features:

• Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
• Exceeds ISO manufacturing guidelines. (International Organization for Standardization)
• OE vane configuration to dissipate heat, increasing pad life.
• Proper harmonic design helps to reduce brake noise.
• Non-directional finish for less break-in time and reduced brake noise.
• Ready for immediate "out-of-the-box" installation (after cleaning)
  
  Advance Auto Parts Rotor Tips:

  • Recommend using Wearever Brake Clean to remove residual manufacturing oils prior to installation.
  • Always use a torque wrench to tighten wheel bolts to the manufacturers'' specifications to prevent pedal pulsation.
  • Always replace rotors in pairs to improve stopping power.

Piston seals and sliders are lubricated to promote smooth operation. 100% new brake hardware to complete pad and caliper installation. All hydraulic connections are tapped to ensure proper installation.

100% Made in USA
5-ton capacity
Form fitting design minimizing slippage and additional damage
Works on 1999 to present Chevy 1500, 2500 and 3500 truck frames (does not work on Chevy SUV box frames)
Available in kits Chevy SUV/pickup truck frame pullers. Form fitting contours and wide width minimizes slippage and additional damage. The SWC01 works on 1999 to present Chevy 1500, 2500 and 3500 truck frames (does not work on Chevy SUV box frames). Also available in kits. Specifications: Capacity: 5-ton (4.5 t); Overall length: 9" (229 mm); Width: 4" (102 mm); Weight: 4 1/4 pounds (1.9 kg).

Direct replacement Hydraulic Brake Hoses are designed to fit specific vehicle applications and positions. This ensures a great fit every time. New hose replacement is recommended as part of a complete brake repair for your vehicle. The new hoses help to prevent loss of brake fluid and provide optimal brake performance.

Product Features:

• Quality construction ensures strength, chemical and thermal resistance for longer life
• Brake Hoses with banjo end fittings include new copper washers to ensure proper sealing
• All Brake Hoses are tested up to 4,000 PSI to ensure Safety standards are met
• Integral brackets, if applicable, included to ensure proper fit and ease of installation

The highly popular Noah car cover provides maximum all-weather protection at a great value. Outdoor elements are no match for these durable, lightweight covers. Made from proprietary materials and technology, these covers are in a class of their own. Noah car covers are uniquely constructed from industry leading Kimberly-Clark fabric. Protection begins at the inner layer, an impact-resistant polyethylene/nylon blend material that is ultra-gentle on your vehicle’s finish. Then, a central layer of micro-porous fabric repels water and dust, yet remains breathable so moisture vapor can escape. The outside layer of the car cover is constructed from a polypropylene/polyethylene spun bond material that is highly durable, heat-resistant and scratch-resistant. UV inhibitors make this cover great for extended outdoor use. Comes in silver-grey color. Backed by a 4-year warranty.

Product Features:

• High quality all-weather protection
• Kimberly-Clark's best outdoor fabric
• High-tech bonded 4-layer composite
• Film barrier technology
• 4-year warranty

1/2" trim width; 3/4" trim length

Designed specifically for use with NOS EFI nitrous systems where much higher fuel pressures are used. These are accurate from 0 to 120 PSI.

Product Features:

• For Use w/EFI Nitrous System
• Higher Fuel Pressures Used
• Accurate Readings
• Glycerin Filled Version Available
• Provide Vibration Dampening

This part is made from aluminum or metal casting with molded rubber inserts. Helps eliminate engine rocking action.

Product Features:

• Steel stampings made to exact dimensions and gauge
• Molded rubber made from SBR material provides proper dampening of vibration