Cap Screw-Hex Head-Grade 8- 3/8-24 x 1-1/2 Inch to Brake Master

• Available in many head styles including round, flat, pan, oval, truss, and hex
• Slotted, Phillips, Hex, Square, and a multitude of other varieties available
• Thread varieties include Machine Screw, Sheet Metal Screw, Self-Tapping, and others
• A large selection of diameters, lengths and quantities available in different assortments and/or kits

• Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
• Exceeds ISO manufacturing guidelines. (International Organization for Standardization)
• OE vane configuration to dissipate heat, increasing pad life.
• Proper harmonic design helps to reduce brake noise.
• Non-directional finish for less break-in time and reduced brake noise.
• Ready for immediate "out-of-the-box" installation (after cleaning)
  
  Advance Auto Parts Rotor Tips:

  • Recommend using Wearever Brake Clean to remove residual manufacturing oils prior to installation.
  • Always use a torque wrench to tighten wheel bolts to the manufacturers'' specifications to prevent pedal pulsation.
  • Always replace rotors in pairs to improve stopping power.

• Pre-Greased Spark Plug Boots = Quicker Installation
• Delphi Packard-marked Cable = OE Component Confirmation
• OE Boots, Terminals, and Lead Lengths = No Hassle Installation
• Application Correct Seven and Eight Millimeter Cable Sizes = Correct Fit to Harness Clips

• Lock ring and gasket included (where applicable)
• Rust resistant
• Direct replacement for a proper fit every time
• Quality tested for durability

• Available in many different styles including hex nuts, flanged nuts, square nuts, wing nuts, and more
• Available in a large variety of sizes, thread pitches, and quantities
• Prevailing torque lock nuts and other types available for increased durability against high-heat conditions
• Also suitable for a broad variety of household, industrial and commercial uses

• Flat washers, split lock washers, fender washers, fiber washers and many other types available
• Manufacturing materials include steel, stainless steel, nickel alloy, and more
• Conveniently packaged in a variety of sizes, assortments, and quantities
• Also suitable for a broad variety of household, industrial and commercial uses

ACDelco has over 100 years of experience in the automotive industry and is a brand of GM Customer Care and Aftersales, a division of General Motors. ACDelco employs a two- or three-tiered distribution model, utilizing a network of appointed wholesale distributors to service independent installers, ACDelco independent service centers, retail and fleet customers.

• Many different types available, including long, dual and tube styles
• Corrosion-resistant brass design for a long service life
• Also suitable for a broad variety of industrial and commercial uses
• Available individually and in a variety of piece counts to assist with both small and large projects

• Available in many head styles including round, flat, pan, oval, truss, and hex
• Slotted, Phillips, Hex, Square, and a multitude of other varieties available
• Thread varieties include Machine Screw, Sheet Metal Screw, Self-Tapping, and others
• A large selection of diameters, lengths and quantities available in different assortments and/or kits

• Designed for 1500 to 6500 Performance
• Maximum Power in High-RPM with Good Low-End Torque
• Matched to Edelbrock Performer RPM Intakes
• 10 to 12 in. of Manifold Vacuum at Idle
• More Lift and Duration than Most Street Camshafts
• Dyno Matched/Street Proven Performance
• Take The Guesswork Out Of Camshaft Selection
• Use Only Stock Ratio Rocker Arms

• Available in many head styles including round, flat, pan, oval, truss, and hex
• Slotted, Phillips, Hex, Square, and a multitude of other varieties available
• Thread varieties include Machine Screw, Sheet Metal Screw, Self-Tapping, and others
• A large selection of diameters, lengths and quantities available in different assortments and/or kits

• 100% New Axle
• Quality Engineered for Superior Durability
• Tested for Reliable Performance
• No Core Exchange

• Internal springs increased durability and enhanced stability prevents tube chafing
• Lower amperage draws less load on vehicle's electrical system
• Fuel level gold-filled sensors provide improved resistance to sulfur corrosion and heat resistance
• Empty float height and float retention is to exact OE specifications guaranteeing correct gas gauge reading

• Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
• Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
• FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
• Every part for the repair procedure is included in the kit unless otherwise noted

• Original Equipment Quality Parts
• Made in Korea
• Manufactured by ISO-14000, QS-9000, or ISO/TS-16949 certified suppliers

• Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
• Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
• FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
• Every part for the repair procedure is included in the kit unless otherwise noted

• Each unit is 100% computer tested at 3 points in the remanufacturing process to ensure great performance.
• Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
• Improved over O.E. - Gears are redesigned with a stronger, less brittle material than O.E. to prevent premature wear, striping and breakage, thus extending the performance life.
• Motor magnets are 100% recharged for superior performance and reliability.
• New high-quality gaskets are used in every window lift unit to prevent water entry, thus eliminating failure modes related to water penetration.

• Motors built and tested to OE specifications
• Made in ISO certified facilities
• Out of box installation
• Wide selection of early/late model applications for domestic and import vehicles

• 100% New Axle
• Quality Engineered for Superior Durability
• Tested for Reliable Performance
• No Core Exchange

• 3 in. Diameter Bar
• Mount Kit Included
• License Plate Re-Locator May Be Required
• May Partially Cover License Plate
• Chrome Plated Stainless Steel
• Skid Plate Features Die-Cut Westin Logo
• Easy No Drill Installation
• Lifetime Warranty

• Sold in pairs for convenient installation
• Corrosion resistant
• Direct replacement for a proper fit every time
• Quality tested for trouble free performance

• Original Equipment Quality Parts
• Made in Korea
• Manufactured by ISO-14000, QS-9000, or ISO/TS-16949 certified suppliers

• Original Equipment Quality Parts
• Made in Korea
• Manufactured by ISO-14000, QS-9000, or ISO/TS-16949 certified suppliers