Vacuum Power Brake Booster without Master Cylinder - Remanufactured to Engine Control Computer - Remanufactured

• 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
• Exclusive rust-prohibitive finishing process extends unit life.
• Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
• New mounting nuts and washers ensure proper, hassle-free installation.
• All units are 100% vacuum tested to ensure reliable performance.

• 100% computer testing ensures consistent performance.
• 100% new OE-quality seals and cups are installed to prevent leakage and ensure original performance and reliability. All rubber meets S.A.E. specifications.
• Cast iron master cylinders come with premium protective coating to minimize rust, extending on-car and on-shelf life.
• Piston assemblies are 100% height-gauged to meet or exceed O.E. performance.
• Bores meet critical micro-finish specifications to eliminate pitting and corrosion, which could cause premature failure.
• Plastic reservoirs are 100% vacuum-tested to ensure proper function.

• Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
• Lock ring included with each tank to reduce installation time and to ensure a complete repair
• Made with corrosion resistant, OE approved, Ni Terne steel for durability
• Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
• Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
• Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
• Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
• Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation

• Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
• Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
• FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
• Every part for the repair procedure is included in the kit unless otherwise noted

Walker has been a driving force of innovation over the past century. The brand's history of innovative engineering includes such "firsts" as the louvered-tube muffler, stainless steel muffler, aluminized exhaust products, and chambered-tube mufflers. These advantages continue today in virtually every premium Walker exhaust and emission control component. For Walker, innovation drives performance and satisfied customers.

• Full Front Area Protection
• Protects Against Bugs, Rock Chips
• Hood Opens with Mask In Place (MM Series)
• Heavy Duty Vinyl with Soft Fleece Back
• Custom Patterned for Easy Installation
• Warranty: 90 Days

• Shock Kit

• Designed to increase horsepower and acceleration
• Washable and reusable lifetime air filter
• Offers high airflow with excellent filtration
• Lasts up to 50,000 miles before cleaning is required, depending on driving conditions
• Emissions legal in all 50 US states

Full flashed super chrome mirror finish

Box End features surface drive

T and E patented "greater surface drive" contact on the flats of the hex (away from the corners) give a more positive non-slip non-burr- grip with increased torque and superior strength The Only State of the Art COLD FORMED manufactured technique makes our sockets stronger with thinner walls. Thin walls allows for close tolerances. T and E sockets are manufactured from the highest quality alloy steels to provide strength and endurance well beyond Federal Specifications for torque and strength. All of our sockets meet and exceed ANSI standards and Federal Specifications 641-E. Set includes: 3/8", 7/16", 1/2", 9/16", 4/8", 11/16" and 3/4".

• Flat washers, split lock washers, fender washers, fiber washers and many other types available
• Manufacturing materials include steel, stainless steel, nickel alloy, and more
• Conveniently packaged in a variety of sizes, assortments, and quantities
• Also suitable for a broad variety of household, industrial and commercial uses

• Clean Wheels
• Ultra-quiet
• Extremely rotor-friendly
• European braking performance with an enhanced pedal feel
• Friction formula specifically designed for a European vehicle
• Ultimate upgrade for OE semi-metallic and low metallic brake pads

• Restores Windshield Washer Pump to original operation
• Kit contains one valve, one valve seal, one straight connector, one angled connector, one connector seal, and four screws
• Installation instructions included
• Fits various models with straight and angle mounting

• Constructed of high-quality steel
• Resistant to rust, warping, and stripping
• Multiple lock designs available
• Quality-tested to ensure performance and durability

• Problem Solver® powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability.
• Problem Solver® patented cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life part.
• Exclusive cover plate protects against contaminants leaking into the bearing surface.
• MOOG® engineered steel composition results in a stronger component. Full ball metal stud provides 360 degrees of smooth, consistent, rotational movement resulting in more responsive steering.
• Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear.
• A flange style sealed boot equipped with special grease relief valve to prevent contamination.

Omix-ADA is more than just a parts manufacturer, they're a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world's roughest terrain for about two decades. Omix's team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you.

Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

• 100% resolder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
• 100% computer testing ensures reliable performance.

• 100% resolder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
• On-car vehicle validation testing ensures that modules meet all fit, finish, functionality and durability requirements.
• All modules are 100% computer tested to ensure reliable operation.

• Tier 1 OEM / OES Supplier
• Only top quality materials utilized
• Designed to optimize best material and technology combination specific to application