Engine Coolant Water Outlet to Premium Oxygen Sensor

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Factory Air.

Product Features:

• Includes quality gasket to ensure proper seal
• Heavy cast OE style construction
• Quality machined thread ports
• Corrosion and rust inhibitor coated

Helps prevent damage to the hood, windshield and fenders from stones and pesky bugs. Traditional hood width design improves the look of your vehicle and protects your investment. Installs quickly with strong automotive grade tape or mechanical fasteners. Custom molded of rugged impact-modified smoke acrylic. Custom fit applications are available for trucks, vans, SUVs and CUVs.

Product Features:

• Wrap-Around Design for Sleek Aero-dynamic Appear.
• Made of Impact Modified Acrylic
• Car-Wash Safe
• Helps Prevent Damage to Hood
• Protects Windshield and Fenders
• No Drill Installation
• Limited Lifetime Warranty

Tools, Fluids & Garage > Hardware, Belts & Hoses > Fasteners

WeatherTech Side Window Deflectors offer fresh air enjoyment with an original equipment look. They are crafted from the finest 3mm cast acrylic material available. Installation is quick and easy, with no exterior tape needed. WeatherTech Side Window Deflectors do not stick to the outside of your vehicle. They install inside the window channel. These low profile window deflectors help to reduce wind noise and allow interior heat to escape, even when it is raining.

Product Features:

• Our light tinted Side Window Deflectors are the only deflectors in the world made with a D.O.T. approved (U.S. Department of Transportation) glazing material.

Bosch Professional Preferred Remanufactured Alternators are built especially for extremes of heat, cold and high demand. They are built to last, using high-quality materials and the technologically advanced processes. All alternator parts are 100% factory tested prior to and during remanufacturing to ensure that they meet or exceed original equipment specifications, and every Bosch remanufactured alternator is full-load tested to guarantee compliance with Bosch's strict performance specifications.

Product Features:

• 100% new high-quality bearings provide a long life and promote quiet, vibration-free operation
• Rotor slip ring machined to tough concentricity specifications for increased brush life and reduced electrical interference on computer-controlled vehicles
• Voltage regulators and rectifiers are 100% tested and replaced where required to ensure stable voltage output, eliminate shorts and open circuits and provide excellent reliability under extreme conditions

Routine Maintenance > Belts & Hoses > Belt Components

As market demand for new Mass Air Flow Sensors continues, there is an unfortunate growing assumption that all MAFS are made the same. The reality is there are significant quality differences in the units sold into the aftermarket today, and an inferior quality product will inevitably lead to reduced fuel efficiency and drivability problems down the road.

Product Features:

• RPT’s complete line of "New" Mass Air Flow Sensors, featuring C-MAFS Ceramic PC boards to ensure premium performance and durability.
• Provide more consistent voltage to eliminate engine rough idle problems.
• Platinum connector threads reduce the number of connection points for faster reaction to change.
• Silica gel is applied to ceramic PC boards to protect the chip, providing superior resistance to extreme temperature fluctuations and vibration.
• All units are produced at our Taiwan facility with state-of-the-art robotics.
• 100% new units are engineered and tested to meet or exceed OE specifications

Remanufactured in the U.S.A. for optimum performance and fuel economy, Tomco brand carburetors are renowned as the ultimate replacement for your vehicle's original equipment. Completely disassembled and cleaned, every component is thoroughly evaluated. Non-qualifying components are replaced and design flaws corrected based upon our extensive research. Every carburetor is flow tested to simulate actual vehicle conditions and adjusted to the original equipment manufacturer's specifications. Experience and care assures that you will receive the highest quality carburetor which meets or exceeds the performance of your vehicle's original equipment.

Dorman’s HVAC Heater Hose Connector resists brittleness, cracking, and leaking. Made of high-quality steel, it weathers extreme temperatures from the engines coolant.

Product Features:

• Direct replacement for ease of installation
• Replace only the connector, not the entire Heater Hose assembly
• Also available as part of Dorman’s Installer Tech Tray
• Fits a wide variety of applications

BWD Idle Air Control Valves are manufactured to meet or exceed OE performance.

Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.

Dorman offers a comprehensive line of Compression Fittings for almost any automotive brake repair job. All our Compression Fittings are constructed of high-quality materials for long-lasting durability.

Product Features:

• Available in many different styles, including elbows, union, and tees
• A large variety of tube diameters and pipe sizes available
• Conveniently packaged in diverse piece counts to assist with both small and large projects
• Also suitable for a broad range of industrial and commercial uses

Quick change blade requires no tools

Folding lock for safety

Easy carry belt clip

Includes 5 extra blades in handy dispenser

12 pack counter display available Lifetime warranty.

Custom magnetic circuit programming calibrates the sensor while performance testing for improved timing accuracy between the target wheel and sensor output. Advanced circuitry protects the system from stray electromagnetic fields and power spikes.

The part is precision machined with high grade material for greater durability

Product Features:

• Maintains excellent chain or belt tension
• Coated in rust preventative
• Component meets or exceeds O.E.M. specifications in manufacturing and material

Sealed Power engine products are a complete system of application-engineered internal replacement components, including pistons, piston rings, engine bearings, camshafts, oil pumps, timing components and valvetrain products. These proven replacement parts are the result of nonstop product development efforts, dedicated to putting only the absolute best on the street.

Federal-Mogul engineers have extensive experience in designing components to accommodate changes in the engine due to wear. By leveraging this expertise, Sealed Power components ensure unmatched performance and reliability. In fact, Sealed Power's full range of engine components incorporate advanced in-house engineering and machining technologies combined with proprietary metallurgies that can improve fuel economy, reduce emissions and add durability to both gasoline and diesel engines.

Professionals trust Sealed Power components for both premium passenger car and light truck rebuilds. They meet or exceed the industry's toughest standards. Rely on Sealed Power products for your next engine rebuild or repair.

The Monroe Sensa-Trac strut with PSD (position sensitive damping) and the Safe Tech system combines our exclusive precision tapered grooves in the pressure tube with application engineered valving and Fluon banded piston to improve the ride, handling, and safety characteristics of the vehicle. These features allow the Monroe Sensa-Trac strut to adjust more rapidly to changing road and weight conditions than any other available shock absorber.

Product Features:

• All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
• Rod Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride comfort.
• Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
• Unique Groove Tube - PSD: Precision tapered grooves in the pressure tube perform like an additional stage of valving for optimum ride tuning.
• Hardened and Chrome Plated Piston Rod: Long service life.
• Unique Rod Guide and Single Lip Seal: Bronze reinforced rod guide bearing and special seal provides longer service life and consistent performance.
• Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
• Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.

Bosch ceramic technology affords best-in-class performance. The ceramic element is a critical part of any oxygen sensor. Bosch's patented materials and processes are your assurance of unparalleled quality and performance.

The purpose of the engine mount is to support the engine and dampen vibration. Each mount is specifically engineered and designed to OEM standards.

Forged from the finest chrome molybdenum alloy steel - the best choice for strength and durability

Radius corner design - to extend the life of fasteners

Tie rod end socket

Fully guaranteed No doubt, Sunex tools offer one of the most complete and toughest Impact Socket lines around.  This 1/2" tie rod end socket is designed to tackle the toughest jobs with solid durability and keeps them pounding job after job.  Also it features a radius corner design, causing the socket to grab the sturdy wall of the fastener instead of grabbing the corners, resulting in less wear on the fastener. 

T-connectors that include a converter use surface mount technology (SMT).

Product Features:

• Wiring T-Connectors

Sold separately, Dorman’s Wheel Nut Locks are engineered to last and easy to use. Durably designed with a chrome finish, they blend in with the overall aesthetic design of your car, offering optimal security and appearance.

Product Features:

• Constructed of high-quality steel
• Resistant to rust, warping, and stripping
• Also available in sets
• Multiple lock designs available

Fenco, a subsidiary of Motorcar Parts of America, has evolved to become a leader in the North American Automotive Aftermarket, offering multiple lines of both Remanufactured and New products.

Product Features:

• Premium Unloaded/Semi-Loaded/Loaded
• OEM Grade Rubber Components
• Correct OEM Specified Piston Material
• Essential Mounting Hardware Included
• Exclusive Rustproof Coating

3 inch round tube. Galvanized mild steel. Recessed step area. Mount kit included. Features no drill installation. Adds perfect finishing touch to vehicle. 3 year warranty.

Product Features:

• 3 in. Round Tube
• Galvanized Mild Steel
• Recessed Step Area
• Mount Kit Included
• No Drill Installation
• Adds Perfect Finishing Touch To Vehicle
• 3 Year Warranty

BWD brake pad wear sensors are manufactured to meet or exceed OE performance.

Cooling & Heating > AC Clutches & Compressors > AC Compressors

Custom molded thermoplastic material. Patented snap fastener system. Stain and moisture resistant. Hose off for easy cleaning. Textured slip-resistant surface. Shifter locations marked (if applicable). Protects from dirt, snow, water, grease, and chemicals. Molded outer edge. Won't crack, split, or break. Limited lifetime warranty.

Product Features:

• Custom Molded Thermoplastic Material
• Patented Snap Fastener System
• Stain/Moisture Resistant
• Easy Cleaning/Hose Off
• Textured slip-resistant surface
• Protects from Dirt/Snow/Water/Grease/Chemicals
• Molded Outer Edge
• Limited Lifetime Warranty; No Crack/Split/Break

Brakes, Steering & Suspension > Brake Pads & Shoes > Brake Pads & Shoes

Digital laser measurements of interior surfaces offer a consistently perfect fit. A patented tri-extruded composition allows for a rigid core for strength while offering surface friction to the carpet, as well as tactile feel to the surface. The FloorLiner advanced surface design has channels that carry fluid and debris, away from shoes and clothing, into a lower reservoir. The lower reservoir uses additional channeling to minimize fluid movement while driving. Once fluids become trapped in the reservoir, they are easily removed from the WeatherTech FloorLiner over the door sill…No muss – No Fuss! Rear FloorLiner incorporates many of the same design features as the front FloorLiner. Rear FloorLiner DigitalFit are manufactured from a proprietary custom blended TPO that is not only wear resistant, but also remains flexible under temperature extremes. Rear FloorLiner DigitalFit are one piece or two piece depending on the vehicle application.

Product Features:

• Digitally Designed
• Traps water, dirt and debris in the reservoir.
• FloorLiner is proudly designed, engineered and manufactured with American made tooling in the USA.

Bosch ceramic technology affords best-in-class performance. The ceramic element is a critical part of any oxygen sensor.