3/4" Drive 6 Point Deep Impact Socket 27mm to Transmission Mount

• Inner cables are sheathed and lubricated to provide longer life and improved performance
• Flexible casings are completely covered with conduit to prevent corrosion of interior cables
• Zinc plated fittings and clips prevent corrosion
• Brackets included where applicable

• Engineered with PowerFrame positive grid technology which virtually eliminates premature failure and resists corrosion up to 66% more effectively than other grid designs.
• PowerFrame provides superior starting performance over the life of the battery with up to 70% better electrical flow than other grid technologies.
• PowerFrame manufacturing process uses 20% less energy and releases 20% fewer greenhouse gas emissions than other manufacturing methods.
• Built to meet or exceed vehicle starting power requirements
• Maintenance free for maximum convenience
• 3 year free replacement warranty

• Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
• Exceeds ISO manufacturing guidelines. (International Organization for Standardization)
• OE vane configuration to dissipate heat, increasing pad life.
• Proper harmonic design helps to reduce brake noise.
• Non-directional finish for less break-in time and reduced brake noise.
• Ready for immediate "out-of-the-box" installation (after cleaning)
  
  Advance Auto Parts Rotor Tips:

  • Recommend using Wearever Brake Clean to remove residual manufacturing oils prior to installation.
  • Always use a torque wrench to tighten wheel bolts to the manufacturers'' specifications to prevent pedal pulsation.
  • Always replace rotors in pairs to improve stopping power.

• Designed to increase horsepower and acceleration
• Hundreds of sizes and shapes for most applications
• Offers high airflow with excellent filtration
• Washable and reusable lifetime air filter
• Pliable flanges absorb vibration and can be stretched up to 1/16" to fit in-between sizes
• Not legal for highway use in states that have adopted California emission regulations

• 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
• Exclusive rust-prohibitive finishing process extends unit life.
• Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
• New mounting nuts and washers ensure proper, hassle-free installation.
• All units are 100% vacuum tested to ensure reliable performance.

• 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
• Exclusive rust-prohibitive finishing process extends unit life.
• Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
• New mounting nuts and washers ensure proper, hassle-free installation.
• All units are 100% vacuum tested to ensure reliable performance.

• Each unit is 100% computer tested at 3 points in the remanufacturing process to ensure great performance.
• Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
• Improved over O.E. - Gears are redesigned with a stronger, less brittle material than O.E. to prevent premature wear, striping and breakage, thus extending the performance life.
• Motor magnets are 100% recharged for superior performance and reliability.
• New high-quality gaskets are used in every window lift unit to prevent water entry, thus eliminating failure modes related to water penetration.

• Direct replacement for a proper fit every time
• Helps guide the dipstick into the oil pan
• Comes with O-ring (where applicable)
• Easy to install

• High Density Foam Backing
• Create Barrier From Heat/Cold
• Helps Reduce Interior Noise
• No Drill Application
• Fastens To Windshield Header Channel
• Snaps To Soft Top Bows
• Attaches To Factory Hardware

• Inner cables are sheathed and lubricated to provide longer life and improved performance
• Flexible casings are completely covered with conduit to prevent corrosion of interior cables
• Zinc plated fittings and clips prevent corrosion
• Brackets included where applicable

• Four layers thick to prevent dents and dings
• Excellent dust and pollution protection
• Insulates vehicle against weather
• Strong Polypropylene fibers

• Economical cover for basic indoor or limited outdoor protection
• Moisture, mold and UV resistant
• Will not scratch clean paint or clear coat, keeps vehicle clean from dust
• Lightweight and compact for easy storage
• 2-year warranty

• Bolt Kit

• Original Equipment fit and form
• Dependable stopping power
• Single-layer shim absorbs noise and vibration for consistently quiet braking
• Limited Lifetime Warranty

• Four layers thick to prevent dents and dings
• Excellent dust and pollution protection
• Insulates vehicle against weather
• Strong Polypropylene fibers

Carbide tip engraves metal, plastic, wood, glass and other surfaces

Variable speed knob controls the depth of engraving

Tool operates on 115VACVibro-Engraver makes permanent markings on the hardest steel, stainless steel, glass, plastic, stone, wood, and other hard materials. Use this light, compact and easy-to-use engraving tool to identify or personalize valuables, tools and company property.  The engraver features a carbide engraving point, on-off switch, and a spark-free motor that vibrates at 7,200 strokes per minute.

Omix-ADA is more than just a parts manufacturer, they're a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world's roughest terrain for about two decades. Omix's team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you.

Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

• Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
• Lock ring included with each tank to reduce installation time and to ensure a complete repair
• Made with corrosion resistant, OE approved, Ni Terne steel for durability
• Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
• Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
• Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
• Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
• Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation