Power Steering Pump without Reservoir - Remanufactured to Diverter Valve

• Sealed Main Body Prevents Rusting From Inside Out
• Open Back End On Receiver For Easy Cleaning
• One-Piece Collar Reduces Rust And Ensures Strength
• Exceeds V-5 Standards
• Exceeds V-5 Standards
• Robotic Welding For Superior Strength And Fit
• Limited Lifetime Warranty To Original Purchaser

• 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
• Exclusive rust-prohibitive finishing process extends unit life.
• Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
• New mounting nuts and washers ensure proper, hassle-free installation.
• All units are 100% vacuum tested to ensure reliable performance.

Walker has been a driving force of innovation over the past century. The brand's history of innovative engineering includes such "firsts" as the louvered-tube muffler, stainless steel muffler, aluminized exhaust products, and chambered-tube mufflers. These advantages continue today in virtually every premium Walker exhaust and emission control component. For Walker, innovation drives performance and satisfied customers.

• Premium Unloaded/Semi-Loaded/Loaded
• OEM Grade Rubber Components
• Correct OEM Specified Piston Material
• Essential Mounting Hardware Included
• Exclusive Rustproof Coating

• Cardone Select Engineered (CSE) Technology ensures that all window lift motors meet or exceed O.E. form, fit and function.
• 100% Load Testing ensures performance every time.
• Units are designed with extra torque motors to prevent premature failure resulting from improperly lubricated window lift regulators.
• Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
• Brushes are precisely designed to ensure armature and contacts are properly matched
• Improved over O.E. - Cardone Select Gears are designed with a stronger, less brittle material than O.E. to prevent premature wear, striping and breakage, thus extending the performance life.

• OE connectors and wire lengths within 3 inches of OE specifications
• Unique sensor coatings to resist contamination
• Long lasting reliable operation.

Walker has been a driving force of innovation over the past century. The brand's history of innovative engineering includes such "firsts" as the louvered-tube muffler, stainless steel muffler, aluminized exhaust products, and chambered-tube mufflers. These advantages continue today in virtually every premium Walker exhaust and emission control component. For Walker, innovation drives performance and satisfied customers.

• Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
• Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
• FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
• Every part for the repair procedure is included in the kit unless otherwise noted

• Cardone Select Engineered (CSE) Technology ensures that all window lift motors meet or exceed O.E. form, fit and function.
• 100% Load Testing ensures performance every time.
• Units are designed with extra torque motors to prevent premature failure resulting from improperly lubricated window lift regulators.
• Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
• Brushes are precisely designed to ensure armature and contacts are properly matched
• Improved over O.E. - Cardone Select Gears are designed with a stronger, less brittle material than O.E. to prevent premature wear, striping and breakage, thus extending the performance life.

• 100% new high-quality bearings provide a long life and promote quiet, vibration-free operation
• Rotor slip ring machined to tough concentricity specifications for increased brush life and reduced electrical interference on computer-controlled vehicles
• Voltage regulators and rectifiers are 100% tested and replaced where required to ensure stable voltage output, eliminate shorts and open circuits and provide excellent reliability under extreme conditions

• Direct replacement for a trouble-free installation
• Bushings included for a complete installation, saving time and labor (where applicable)
• Corrosion-resistant for long-lasting performance
• A rigorous quality inspection has been undertaken to ensure that this part conforms to product standards

• Designed to increase horsepower
• Designed to improve throttle response and engine sound
• Replaces entire factory air intake system
• Lasts up to 100,000 miles before service is required, depending on driving conditions
• Installs in as little as 90 minutes

• OEM (original equipment manufacturer)
• Precision-built for exact replacement
• 100% load and no-load tested
• High-quality construction

In North America, Bosal designs, develops, and manufactures original equipment exhaust systems for carmakers such as GM and Ford. Bosal supplies OE service products to many import / transplant carmakers including VW, Honda, Volvo, Subaru, and Mazda. Bosal also develops high performance exhaust for OEM port of entry and dealer programs.

Bosal pioneered the manufacture of one-piece, direct-fit replacement exhaust systems more than twenty-five years ago. Today, Bosal remains the leader in direct-fit exhaust systems for import vehicles, and has expanded their program to include direct-fit catalytic converters for both the import and domestic aftermarket. Included in the catalytic converter program is their new line of Bosal Super-Cats and our most recent addition - Bosal's line of CARB Approved Catalytic Converters.

Product Features:

• One Piece, Direct Fit Unit that eliminates the need for cutting, pipe bending, or welding.

• 100% new high-quality bearings provide a long life and promote quiet, vibration-free operation
• Rotor slip ring machined to tough concentricity specifications for increased brush life and reduced electrical interference on computer-controlled vehicles
• Voltage regulators and rectifiers are 100% tested and replaced where required to ensure stable voltage output, eliminate shorts and open circuits and provide excellent reliability under extreme conditions

• 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
• Exclusive rust-prohibitive finishing process extends unit life.
• Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
• New mounting nuts and washers ensure proper, hassle-free installation.
• All units are 100% vacuum tested to ensure reliable performance.

Omix-ADA is more than just a parts manufacturer, they're a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world's roughest terrain for about two decades. Omix's team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you.

Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.

Product Features:

• 1980-1983 CJ with 4 Cylinder GM 151, Clutch Cover

• Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
• Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
• FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
• Every part for the repair procedure is included in the kit unless otherwise noted